Package No.204_4

Clearing and grubbing road land including uprooting, wild vegetation, grass, bush, shurbs, sampling and trees of girth upto 300mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and staking of serviceable material to be used or auctioned. up to a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per Technical specification clause 201. (i) By Manual Means (A) In area of non thorny jungle.

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compacting up to meet requirement of Tables 300.1 and 300.2 with lead up to 1000m as per Technical Specification Clause 301.5 (I) Private Land.

Construction of Sub grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead up to 1000m as per Technical Specification Clause 300.1 (I) Private Land.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator with OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (A) By Mix in Place Method (II) For Grading II Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate,watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. (A) By Mannual Means WBM Grading-II

Providing, laying, spreading and compacting stone aggregates of specificsizes to water bound macadam specification including spreading in uniform thickness, handpacking, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate,watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Mannual Means WBM Grading-III

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base /WBM/WMM including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502. (i) Medium Porosity.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30kg per sqm on the prepared granular surfaces with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

20 mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 mm to5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level toserve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.2 Case -I By manual means (i) Bitumen S-90

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. A. By Manual Means Case - I : Type A (11.2mm to 2.36mm) (i) Bitumen (S-90).

Providing and erecting direction and place identification retro-\reflectorise dsign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2mm thick with area exceeding 0.9 sqm supported on mild steel angleir on posts 75mm x 75mm x 6mm, 2Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450mm x 450mm x 600mm, 600mm below ground level as per approved drawing and Technical Specification Clause 1701.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause1701.2.3 fixed over aluminium sheeting, 1.5mm thick supported on mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x 600mm, 600mm below ground level as per drawing sand Technical Specification Clause 801. (ii) 60mm equilateral triangle

(iii) 60mm circular

RCC Guard Post: Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflective band of desired shade etc. complete as per design and as directed. (a) 30 cm dia. RCC guard post with reinforcement of 6nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c.

Planting of Trees and their Maintenance for three Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trenches, watering, fixing the tree guatrd and maintaining the plants for three year.

Protection Work Providing and laying of boulder apron laid in wire crates with 4mm dia GI wire conforming to IS:280 and IS:4826 in 100mm x100mm mesh (woven diagonally) including10per centextra for lap sand joints laid with stone boulders weighing not less than 25kg each as per drawing and technical specifications Clause 1301.

Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302

Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302

Please Enable Macros to View BoQ information