Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.8 LAccepted-AOC BUILDING NO XIV 231 AMPARANIRAPPEL P O BHARANANGANAM KOTTAYAM 686578 | KOTTAYAM | KERALA | 686578 | L1 | Accepted-AOC L1 |
Tender Value
₹9.8 L
EMD Value
₹24,424
Closing Date
22 Jan 2024, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
REGIONAL ENGINEER
Regional Engineer, KESNIK Regional Office, MG University Campus, P.D. Hills, Athirampuzha, Kottayam 686560
Special Maintenance and repair works in the Green room and MP Hall, MP Hall Grill work and replacement of Grills in the administrative block and Garden wall railing work at JNV Campus Vadavathoor
2024_KSNK_640528_1
KESNIK/TECH/KTM/JNV-2 -18 R/2023
Open Tender
Civil Works - Buildings
Item Rate
90 days
Vadavathoor
Refer NIT
6 documents required · 6 mandatory
₹1,954
₹24,424
Yes
28 May 2024
10 Jan 2024
24 Jan 2024
10 Jan 2024
22 Jan 2024
10 Jan 2024
10 Jan 2024 - 22 Jan 2024
Amount
1. SPECIAL MAINTANANCE IN MP HALL (AUDITORIUM) GRILL WORK AT JNV VADAVATHOOR
od210521/2023_2024 Providing and fixing false ceiling with PVC plain panel board ceiling of approved quality in aluminum frame work with necessary screws etc complete
od210519/2023_2024 Providing and fixing grill and doors for an opening with an outer M.S angle of 50 x 50 mm fixed to the wall and with M.S squ of 20 x 20mm with 12mm squ M.S rods welded and fixed as pre designed including all fittings, fixtures and necessary locking facilities painted with good quality iron primer including labor charges, all complete as per the direction of Engineer In charge.
10.19 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
10.20 Providing and fixing bolts including nuts and washers complete .
od210522/2023_2024 Extra for providing and fixing expanded metal mesh of size 25x25 mm made of G.I. wire of dia 3 mm for encasing or rolled steel sections in beams, columns and grillages excluding cost of hangers.
13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
2. SPECIAL MAINTENANCE AND REPAIR WORKS IN THE GREEN ROOM AND MP HALL STAGE AT JNV VADAVATHOOR
15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
15.13.1 Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metes and below
15.19 Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.
15.41 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of seviceable materials and disposal of unserviceable materials within 50 meters lead.
2.9.1 Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock.
2.38 Filling with available fly ash and earth ( excluding rock) in trenches or embankment in layers ( each layer should not exceed 15 cm), with intermediate layer of compacted earth ( Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer - in- charge, including compacting each layer by rolling / ramming and watering, all complete as per drawing and direction of Engineer - in-charge
50.6.2.1 Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
50.6.2.2 Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
13.4.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)
13.44.1 Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
11.41.3 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 800x 800 mm
11.37A Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in allcolours, shades except burgundy, bottle green, black of any size as approvedby Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thickbed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cementslurry @ 3.3kg per sqm including pointing in white cement mixed with pigmentof matching shade complete
od209479/2023_2024 Providing and fixing in position factory made precast Fiber Cement Board of 8x4x12mm, and win frames with M.S angle of 50 x 50mm as outer and main support and with fixed as support by welding and fixed as per designed including all fittings, and painting with good quality paint including labor charge, all complete as per the direction of Engineer in Charge.
9.143 Providing and fixing factory made uPVC door frame, made of uPVC extruded section, of size 65 mm x 55 mm with wall thickness 2.0 mm (? 0.2mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm ( ? 0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in?charge.
9.146 Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm ( 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm ( 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinges side vertical style to be reinforced with PVC profile reinforcement in full length, Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm ( 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of engineer-in-charge.
od209476/2023_2024 Providing and fixing in position factory made precast Fiber Cement Board of 8x4x10mm, and win frames with M.S angle of 50 x 50mm as outer and main support and with fixed as support by welding and fixed as per designed including all fittings, and painting with good quality paint including labor charge, all complete as per the direction of Engineer in Charge.
3. REPLACEMENT OF GRILLS IN THE ADMINISTRATIVE BLOCK AND GARDEN WALL RAILINGS
od211289/2023_2024 Providing and fixing angle iron frames for doors, windows and ventilators of mild<br>steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron<br>35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with<br>dash fastener, including fixing of necessary butt hinges and screws and applying a<br>priming coat of approved steel primer, all complete as per the direction of<br>Engineer In charge.
13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
10.19 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
10.20 Providing and fixing bolts including nuts and washers complete
od216814/2023_2024 Extra for providing and fixing expanded metal mesh of size 25x25 mm made of G.I. wire of dia 3 mm for encasing or rolled steel sections in beams, columns and grillages excluding cost of hangers.
od216841/2023_2024 Providing and fixing in position factory made precast Fiber Cement Board of 8x4x10mm, and win frames with M.S angle of 50 x 50mm as outer and main support and with fixed as support by welding and fixed as per designed including all fittings, and painting with good quality paint including labor charge, all complete as per the direction of Engineer in Charge.
od214540/2023_2024 GI Rectangular pipe 50x25
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .