REPAIR/REPLACEMENT AND MAINT OF STREET LIGHT AND CONNECTED E/M ITEMS OF SECTOR A AND B UNDER GE (ARMY) BARODA

Amount

Excavation in trenches nexc 1.5 mtr width and n.exc 1.5 mtr depth for foundation or taking out/laying cable / pipe line, or for shafts, cess pits etc n.exc 10 sq mtr on plan and n.exc 1.5 mtr depth and getting out in soft/loose soil.

Returning filling in trenches excavated soil including spreading levelling watering and well ramming in layers n.exc 25 cm.

Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point.

M & L for sand cushioning to PVC cable with using clean dry natural river sand gently punning below/around cable all as specified.

M & L for well burnt bricks sub class 'B' as in protection of cable laid dry, flat abutting each other width wise all as directed

Supply and Laying only including jointing and testing electric under ground LT cable PVC/XLPE insulated armoured aluminium conductor cable 1100 volts grade laid in trenches, ducts, or through pipe on walls, poles of following sizes

25 Sq mm 3.5 core

16 sq mm 4 core

10 sq mm 2 core

Taking down old defective Street Light and Supply & Fix 70/72 Watt LED Street Light fitting New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device including desired size of GI bend pipe of 1.2 mtr length to fitt the security Light fitting.

Supply and Fix in repair 40 watt LED post top lantern New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source.

Repair/Replacement of LED Driver 230 Volt 50 Hz for street light fitting of 40/70/72 watt of Make Bajaj ,CG/Wipro/Philips/Havells

Repair/Replacement of LED Driver 230 Volt 50 Hz for street light fitting of 90/100 watt of Make Bajaj /CG/Wipro/Philips/Havells

Repair/Replacement of LED Driver 230 Volt 50 Hz for street light fitting of 150/180 watt of Make BajajCG/Wipro/Philips/Havells

Supply and fix PVC Jnction Box of Size 20 cm x20 cm x15 cm with hinged door inculding locked arrangment with MCB SP 6 Amps 1 No including necessary clamping. Nuts, bolt etc complete

Supply and fix in repair 100 Watt LED flood light Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light,suitable for highlighting architectural facade and general purpose lighting

Taking down old defective Street Light and Supply & Fix in replacement of 90 Watt LED Street Light fitting New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device including desired size of GI bend pipe of 1.2 mtr length to fitt the security Light fitting.

Taking down old defective Street Light and Supply & Fix in replacement of 35 Watt LED Street Light fitting New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device including desired size of GI bend pipe of 1.2 mtr length to fitt the security Light fitting.Make: Halonixs,Polycab, Orient, Crompton.

S & F in repair LED Flood Light , 180 W Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium non integral IP66 flood light, suitable for high mast application, highlighting architectural facade and general purpose lighting.

Dismantling of old unserviceable MCCBs and S&F following MCCBs suitable to be housed in existing space including link separator

MCCB 63 Amp, 4 pole, 16 KA, with fixed thermal setting

MCCB but 100 Amp, 25 KA, -Ditto-

MCCB but 125 Amp, 25 KA -Ditto-

MCCB but 160 Amp, 25KA thermaly adjustable.

MCCB but 200 Amp, 36 KA -thermaly adjustable

M & L for replacement of flat, twin core , PVC insulated , overall PVC sheathed solid aluminium conductor service cable of following sizes.

1.5 Sqmm Two core

2.5 Sqmm Two core

4.0 Sqmm Two core

6.0 Sqmm Two core

S&F 40 mm bore grade GI pipe medium grade fixed as bracket for street light on LT poles/walls, suitable for street light fittings, not less than 1.20m long and bent to shape as required complete all as specified and directed by Engr-in-charge.

-do- but 25mm bore medium grade GI pipe -do-

Dismantling of analog timer and Supply and fix Pole mountable (Timer switch for street lights) sensor based, astronomical and nature type timer switch with Nature switch - 02 Nos, power contactor for load switching, MCB, and terminal block, including complete with mounting brackets, cable glands, openable door with lock and key. The enclusure made of UV stabliszed, FR grade special moulding compound to provide a rust proof, electric shock proof, termite proof, outdoor mountable electrically insulating body capable of enduring solar radiation in the outdoor. Model/Make Bajaj/CG/wipro, Swadeep,Kakatiya

M & L for preparation of existing old painted surface of any description such as LT steel tubular electric pole/struts of any height and painted completed including cross arms bracing clamps etc with one coats of aluminium paint and in white/blue alternative strips of 30 cm width each all around the poles up to 1.5 M height form the ground level/top of PCC copping including writing MES, LT/HT feeder No. and Pole No. (in capital letters) stencil cut decorative manner on pole using fluorescent paint as directed.

M & L for replacement ,erecting & fixing in true vertical position steel tubular swaged pole type 410S P-31 ( 9.0 metre long ) confirming to IS 2713 with cast iron base plate finial taper plug, bolts, nuts and screws welded & reduced section & longitudinal weld through out entire length of pole including 2 coat of black bituminous paint upto GL level of pole & remaining exterior portion of the pole & two coat of aluminium paint over a coat of red oxide primer including excavation & earth work complete all as specified, shown on TD drawings &directed by Engr in charge.

Supply and fix three phase PVC Jnction Box of Size 30 cm x 20 cm x 10.5 cm with hinged door inculding locked arrangment with MCB TPN 32 Amps 1 No including necessary clamping. Nuts, bolt etc complete

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete of stay assembly/ pole etc complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6.0 mm burried directly in ground level with top edge of earth plate at a depth not less than 2.25 m below ground level connected to and including galvanised iron strip 32 X 6 mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No. 5 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, cast iron cover with lifting handle, funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 40 mm bore light grade 7.5 m long test point etc complete.

Supply, installing, testing and commissioning factory made LT feeder pillar box (KIOSK) outdoor type platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system all as specified and directed having bus bar installed on DMC/Epoxy insulators. The panel shall be dust and vermin proof, IP-65 class protection and made of 2.0 mm Stainless steel SS-316 grade sheet with double door shutter and locking arrangement, front and back opening, using stainless steel hinges, bolts and nuts & washer etc. The panel is including platform with PCC 1:4:8 type D-2 with 40mm crushed stone aggregate 20cm in thick in foundation and of height 0.9 mtr above the nearest road level. The TPN aluminium bus bar of rating not less than the 1.5 times the rated capacity of the incomer MCCB ,including following :- (a) MCCB 4 pole 16 kA 40 Amps with tinned copper link 01 No (Incommer) (b) MCB 4 pole 10 kA 32 Amp - 03 Nos (c) Phase indicator lamps(R-Y-B) -01 set of three (d) Automatic street light switch of rating 8 KW in three phase using nature sensor for automatic switching "ON/OFF" of steel lighting based on lux level of natural light along with 40 Amps Four pole contactor, MCB 40 Amps four pole with support terminals prewired with PVC insulated 25 sqmm multi strand copper wire enclosed/housed in pole wall mounted enclosure made of rust proof, shock proof, termite proof & dust proof FR grade moulded compound Junction Box complete all as specifed Model-SWADEEP -02EC 8KW 3P, Make - Nature switch/Kaktiya Energy systems Pvt Ltd/HEALER/BAJAJ/ 2. Contactor :BCH/L&T/Schneider 3. MCB: Hager/Schneider/Legrand 4. Circuit wiring : Finolex/Polycab - 02 Nos (Timers two Nos for each panel for different ciruits)

Gayatri Associates

P K SHETH

Shree Vaishno Enterprises

Rasam Engg Co.

LAXMI CORPORATION

Pratik Enterprise

City Light

Shiv Projects