SPECIAL REPARING WORKS OF EXISTING BARRACK AT ATS CAMPUS CHHARODI, AHMED ABAD(INCLUDING ELECTRIFICATION WORK) (Seventh attempt) (SBD)

NAME OF WORK : SPECIAL REPAIRING WORK OF EXISTING BARRACK AT ATS CAMPUS CHHARODI, AHMEDABAD(INCLUDING ELECTRIFICATION WORK)

STATEMENT SHOWING AT APROXIMATE A QUANTITY FOR THE ITEM OF ABOVE WORK TO BE CARRIED OUT AND APPROXIMATE COST PUT TO THE TENDER FOR

Description QUANTITY Unit RATE IN WORD Amount

1 Dismantling sanitary fitting like wash basin, wc pan, indian and european type, flushing tanks 34.00 NO 401.63 Rs. Four Hundred One &

etc. incl. stacking the materials with disposing all lead and lift. Paise Sixty Three Only

2 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps 409.00 RMT 74.03 Rs. Seventy Four & Paise

including stacking the materials with all lead and lift ( for any dia, of pipe) Three Only

3 Dismentaling of tile or stone floor slaid in mortar incl. stacking of servicable material and 640.00 SMT 47.25 Rs. Forty Seven & Paise

disposal of unservicable material with disposing all lead and lift. Twenty Five Only

4 Demolition and disposal of unserviceable materials with all lead and lift.(i) Lime concrete. 91.00 CMT 603.23 Rs. Six Hundred Three &

Paise Twenty Three Only

5 Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C 473.00 SMT 19.38 Rs. Ninteen & Paise Thirty

member including stacking of serviceable material and disposal of unserviceable from site of Eight Only

work with all lead and lift

6 Removing dry or oil bound distemper by a washing and scraping and sand papering the wall 1755.00 SMT 11.19 Rs. Eleven & Paise Ninteen

surface smooth including necessary repairs to scratches complete. Only

7 Removing dry or oil bound distemper by a washing and scrapping and sand papering the 592.00 SMT 12.77 Rs. Twelve & Paise

ceiling surface smooth including necessary repairs to surface scratches complete. Seventy Seven Only

8 Scraping oil paint from steel and other metal surface and making the surface even (with Hand 102.00 SMT 48.83 Rs. Forty Eight & Paise

Scraping.) Eighty Three Only

Description QUANTITY Unit RATE IN WORD Amount

9 Provinding and fixing water Closet Squatting (ORRISSA TYPE W.C. PAN ) size 580mm first 5.00 NO 1004.00 Rs. One Thousand Four

quality including necessary "P" or "S" trap, including jointing the trap with pan & soil pipe in Only

viterous chine white colour, Joints shall be pipe sealent.

10 Providing and fixing Wash down white vitreious china WALL HUNG (as Per Approved Material 5.00 No. 5470.90 Rs. Five Thousand Four

List )water closet EUROPEAN TYPE W/C PAN of size 555x360x390mm with intergal "P" trap Hundred Seventy & Paise

including jointing the trap with pan and soil pipe in vitereous china white colour. Rate Ninety Only

inclusive of providing and fixing PVC Flush Tank (as Per Approved Material List ) Soft seat of

the same make. Rate are inclusive of all necessary fittings required for installation of flushing

tank and wall hung. Wall hung shall be fixed on S.S heavy duty rack bolt having 16mm dia,

165mm length using Plastic sleeve Make by Using Drill Bitt Only.

11 Suppllying and Filling Cinder in Sunk Portions for All Lead and Lift etc. Complete. 14.00 CMT 791.68 Rs. Seven Hundred Ninety

One & Paise Sixty Eight

12 Provinding 10mm thick WATER PROOF cement plaster in single coat on fair side brick work or 53.00 SMT 210.99 Rs. Two Hundred Ten &

concrete wall for interior plasering upto floor to level and finishing even smooth in cemente Paise Ninety Nine Only

mortar 1:3 (1 cement :3 sand) finished with floting coat of neat cemente slurry incl. provinding

and mixing water proofing materials in proportion recommended by the manufacturersfor All

13 Providing and Laying Acrylic base (Zycosil or equivalent) Water Proofing paint treatment 53.00 SMT 110.70 Rs. One Hundred Ten &

treatment in two coats of vertical and horizontal surface of depressed portion of Bath/W.C. as Paise Seventy Only

directed by engineer in charge.This treatment shall be carried out over & above water proofing

14 Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat 48.00 RMT 23.45 Rs. Twenty Three & Paise

cement finishing, watering etc. complete. Forty Five Only

15 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded 145.00 SMT 348.08 Rs. Three Hundred Forty

stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat Eight & Paise Eight Only

cement. (B) 50mm thick.

16 Providing & laying plain cement CONCRETE 1:4:8 (1-cement : 4-coarse sand : 8-graded 5.00 CMT 2653.67 Rs. Two Thousand Six

STONE AGGREGATE 40 mm NOminal size) and curing etc. complete excluding cost of Hundred Fifty Three &

formwork in FOUNDATION & PLINTH. Paise Sixty Seven Only

17 BRICK work masonary in common brunt clay building bricks having crusing strength NOt 4.00 CMT 4253.46 Rs. Four Thousand Two

less than 35 kg./sq.cm.in cement mortar 1:6 (1 cement : 6 coarse sand ) (conventional bricks Hundred Fifty Three &

for GROUND FLOOR) Paise Forty Six Only

Description QUANTITY Unit RATE IN WORD Amount

18 Provinding & laying GLAZED/COLOURED TILES 8 mm to 10 mm thick in skirting, risers of 323.00 SMT 1426.95 Rs. One Thousand Four

steps and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) finishing with Hundred Twenty Six &

flush pointing in the colour as specified etc.completion white cement for all floors size and Paise Ninety Five Only

shape shall be as per the instruction of engg.incharge .Material shall be used as approved by

19 Providing and laying Anti skid Ceramic tiles (Non Skiding) 8 mm to 10mm thick in Floorings, 106.50 SMT 960.47 Rs. Nine Hundred Sixty &

treads of steps and landing laid on a bed of 20 mm thick cement mortar 1:3 (1 - cement: 3- Paise Forty Seven Only

coarse sand) finished with flush pointing in the colour as specified etc. complete in white

cement for All Floors. Size and shade shall be as per the instruction of Engineer - In - Charge.

Material shall be used as approved by GSPHCL

20 Providing and Laying Mirror Polished 25 mm thick (Dimond Polished) Polished Kota Stone 56.00 SMT 1081.90 Rs. One Thousand Eighty

Flooring over 20mm thick base of cement mortar 1 : 6 (1-Cement : 6-Coarse Sand) laid over One & Paise Ninety Only

and jointed with grey cement slurry including Rubbing and Polishing etc. Complete. (A) 25mm

Thick. In Green Colour. Rate Are Inclusive

of Single Piece & Making 3 Line Groove & Moulding Of Outer edge as Directed By Engineer In

21 Providing and Laying Double Charge Vitrified Tiles 8 to 10 mm thick in Flooring over 20 mm 28.00 SMT 1440.20 Rs. One Thousand Four

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface orfixing on Hundred Forty & Paise

existing flooring by adhesive including dismentaling of existing flooring and material jointed Twenty Only

with color cement slurry including finised with flush pointing & cleaning the surface etc.

complete for Light shade for all floors.Material shall be used as approved by GSPHCL

22 Providing and Laying 24" x 24" Double Charge Vitrified Tiles 8 to 10 mm thick in Skirting over 3.00 SMT 1392.20 Rs. One Thousand Three

10 mm (average) base of cement mortar 1:3 ( 1 cement: 3 coarse sand) on new surface Hundred Ninety Two &

orfixing on existing flooring by adhesive including dismentaling of existing flooring and Paise Twenty Only

material jointed with color cement slurry including finised with flush pointing & cleaning the

surface etc. complete for Light Shade for all

floors . Material shall be used as approved by GSPHCL

23 Providing and fixing to wall, ceiling and floor SWR/UPVC soil waste pipe 110 mm dia. Of 61.00 RMT 495.91 Rs. Four Hundred Ninety

ISI13592/92 . Rate inclusive of all fittings like single or double 'Y' with door, reducer, coupler Five & Paise Ninety One

single T with door bend, pipe clip on z patti etc. complete and making good the wall, ceiling Only

and Floor. Including Z Patti

Description QUANTITY Unit RATE IN WORD Amount

24 Providing and fixing to wall, ceiling and floor SWR/UPVC soil waste pipe 75 mm dia. Of 96.00 RMT 264.97 Rs. Two Hundred Sixty

ISI13592/92 . Rate inclusive of all fittings like single or double 'Y' with door, reducer, coupler Four & Paise Ninety Seven

single T with door bend, pipe clip on z patti etc. complete and making good the wall, ceiling Only

and Floor. Including Z Patti 1.6 Mm Thick

25 Providing and fixing Ceilling and Floor SWR Rain Water Pipe as Per IS-13592 of 90mm Dia. 53.00 RMT 323.15 Rs. Three Hundred Twenty

Complete with Special Flings, Compressor type Fittings, Wall clips on wooden patty including Three & Paise Fifteen Only

making good the ceiling and floor on terrace rain water pipe shall be 90 mm Dia. SWR

Horizontal pipe and vertical pipe and 90mm bend at the end near by Ground level rate are

Inclusive of all Necessary Fittings required for ALL FLOORS. Including Z Patti 1.6 Mm Thick

26 Providing and Fixing concealed centre point to wall ceiling and floor CPVC ( SDR 13.5) poipe 29.00 RMT 202.97 Rs. Two Hundred Two &

having National sanitation foundation ( NSF) seal for potable water of following dia. Nominal Paise Ninety Seven Only

bore tube fittings and clamps including, making good the wall,ceiling and floor etc

complete.Pipe shall be concealed or open as per mentioned in tender description.Pipe shall be

approved make of GSPHCL list (20 mm inside dia).

27 Providing and Fixing concealed centre point to wall ceiling and floor CPVC ( SDR 13.5) poipe 39.00 RMT 247.25 Rs. Two Hundred Forty

having National sanitation foundation ( NSF) seal for potable water of following dia. Nominal Seven & Paise Twenty Five

bore tube fittings and clamps including, making good the wall,ceiling and floor etc Only

complete.Pipe shall be concealed or open as per mentioned in tender description.Pipe shall be

approved make of GSPHCL list (25 mm inside dia).

28 Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) 28.00 RMT 330.36 Rs. Three Hundred Thirty

PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. & Paise Thirty Six Only

nominal bore tube fittingswith Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with

washer for Vertical water supply pipe. Pipe shall be concealed or open as mention in tender

description. Pipe shall be as per approved make of GSPHCL make list (32 mm inside dia).

29 Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) 105.00 RMT 437.66 Rs. Four Hundred Thirty

PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. Seven & Paise Sixty Six

nominal bore tube fittingswith Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with Only

washer for Vertical water supply pipe. Pipe shall be concealed or open as mention in tender

description. Pipe shall be as per approved make of GSPHCL make list (40 mm inside dia).

Description QUANTITY Unit RATE IN WORD Amount

30 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 25 mm 12.00 NO 416.47 Rs. Four Hundred Sixteen

dia. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per & Paise Forty Seven Only

Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. All material

used as per approved make list

by GSPHCL 25 mm dia.

31 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE Rate 4.00 NO 311.61 Rs. Three Hundred Eleven

are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed & Paise Sixty One Only

Drawings, Specifications and as per the Instruction of Engineer In charge. All material used as

per approved make list by GSPHCL. 32 mm dia.

32 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 40 mm 8.00 NO 656.86 Rs. Six Hundred Fifty Six &

dia. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Paise Eighty Six Only

Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. All material

used as per approved make list by GSPHCL. 40 mm dia.

33 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the 21.00 NO 552.83 Rs. Five Hundred Fifty

following nominal diameter of self cleansing design with C.I scread down or hinged grating Two & Paise Eighty Three

including the cost of cutting and making good the walls. Only

34 Providing & Fixing 15mm One way Bib Tap with WAll Flange. Rate are inclusive of All 20.00 NO 990.61 Rs. Nine Hundred Ninety &

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications Paise Sixty One Only

and as per the Instruction of Engineer In charge. The Model & Make of Bib Tap ShAll be as per

the Approved Make List of GSPHCL.

35 Providing & Fixing 25mm Concealed Heavy Duty Stop Cock with Exposed Part & Other 5.00 NO 1233.57 Rs. One Thousand Two

Accessories (Sleeve, Lever, Wall Flange) . Rate are inclusive of all matreials, Labour & Hundred Thirty Three &

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Paise Fifty Seven Only

Instruction of Engineer In charge. The Model & Make of Concealed Heavy Stop Cock Shall be

as per the Approved Make List of GSPHCL. .

36 Providing & Fixing 15mm Concealed Heavy Duty Stop Cock with Exposed Part & Other 13.00 NO 942.54 Rs. Nine Hundred Forty

Accessories (Sleeve, Lever, Wall Flange) . Rate are inclusive of all matreials, Labour & Two & Paise Fifty Four

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Only

Instruction of Engineer In charge. The Model & Make of Concealed Heavy Stop Cock Shall be

as per the Approved Make List of GSPHCL.

Description QUANTITY Unit RATE IN WORD Amount

37 Providing & Fixing Wall Mounted Sink Cock with Extended Swivel Spout & Wall Flange . Rate 2.00 NO 1330.32 Rs. One Thousand Three

are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Hundred Thirty & Paise

Drawings, Specifications and as per the Instruction of Engineer In charge. The Model & Make Thirty Two Only

of Sink Cock Shall be as per the Approved

Make List of GSPHCL.

38 Provinding and Fixing in position UPVC / SWR cowel vent to pipe 110 mm dia as directed. 6.00 NO 28.16 Rs. Twenty Eight & Paise

39 Provinding and Fixing in position UPVC / SWR cowel vent to pipe 75 mm dia as directed. 6.00 NO 16.47 Rs. Sixteen & Paise Forty

40 Providing & Laying integrated cement based proprietary water proofing treatment of required thickness 100.00 SMT 855.11 Rs. Eight Hundred Fifty

over the roof including 10mm thick cement mortar 1:3 and CHINA MOSAIC fitting and finally finishing the Five & Paise Eleven Only

surface with white cement slurry and sloping out terrace slabs with Following specification laid to required

slope not flatter than 1:80 ( the thickness of water proofing treatment near rainwater outlet or the lowest

point of the finished slope shell not to be less than 45 mm. Including treating the vertical surface of the

parapet wall up to 20 cm. height above finished level of terracing including finishing top with joint less

water proofing plaster curing testing etc, completed. Rate is Including 10 years performance of guarantee

bond to be given on stamp paper ( no extra shall be paid for increase in thickness for proper slope ).(A)

Applying & grounting a slurry coat of neat cement using 2.75 kg/smt. of cement admixed with proprietary

water proofing compound confirming to IS 2645 and 10mm. Thick water proofing cement plaster in cement

mortar in 1:3.over the RCC slab including cleaning the surface before treatments (B) Laying cement

concrete using broken brick bat using 25 mm to 40 mm size with 50% of cement mortar 1:4 ( 1 cement :

corse sand )over 10mm. thick water proofing cement plaster in cement mortar in 1:3 admixed with

proprietary water proofing compound conforming to IS 2645 required slope and treating similarly the

adjoining walls up to 200 mm height including rounding of junction of walls.(C) After two days of proper

curing applying a second coat of cement slurry .(D) Finishing the surface with china mosaic peices laid on

10 mm thick joint less cement mortar of mix 1:3 ( 1 cement : 3 sand) admixed with proprietary water

proofing compound confirming to IS 2645 and finally finishing the surface with trowel with neat cement

slurry .(E) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for

curing for final test. All above operation to be done in order and as directed and specified by the engineer in

41 Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground level 138.00 SMT 297.68 Rs. Two Hundred Ninety

consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thock Seven & Paise Sixty Eight

finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height. Only

42 Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for 192.00 SMT 203.34 Rs. Two Hundred Three &

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Paise Thirty Four Only

finishing with floating coat of neat cement slurry at GROUND FLOOR.

Description QUANTITY Unit RATE IN WORD Amount

43 Provinding 15 mm thick cement PLASTER in single coat on BRICK or CONCRETE wall for 209.00 SMT 231.20 Rs. Two Hundred Thirty

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including One & Paise Twenty Only

finishing with floating coat of neat cement slurry at FIRST FLOOR.

44 Finishing walls with Weather Proof Exterior Emulsion Paint on Wall Surfaces (Two Coats) over 666.00 SMT 147.68 Rs. One Hundred Forty

and above Applying one coat of Primer to give an Required shape and even shade after Seven & Paise Sixty Eight

thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials Only

and finishing smooth etc. complete for all floor. Putty,Primer And paint as per approved list of

45 Finishing Ceiling / Slope Surfaces with Plastic Emulsion Paint on Ceiling / Slope Surfaces 592.00 SMT 186.73 Rs. One Hundred Eighty

(Two Coats) to give an Required shape and even shade after thoroughly brushing the surface Six & Paise Seventy Three

to remove all dirt, and remains of loose powdered materials and finishing smooth etc. Only

complete. Rate are inclussive of Applying Two Coats of Lappy (Putty) and One Coat of Primer

on New Wall Surfaces to give an even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand papered smooth. for all floor.Putty,

Primer & Paint as per approved list of GSPHCL

46 Finishing Walls with Plastic Emulsion Paint on Wall Surfaces (Twocoats) to give an Required 1090.00 SMT 176.33 Rs. One Hundred Seventy

shape and even shade after thoroughly brushing the surface to remove all dirt, and remains of Six & Paise Thirty Three

loose powdered materials and finishing smooth etc. complete. Rate are inclussive of Applying Only

Two Coats of Lappy (Putty) and One Coat of Primer on New Wall Surfaces to give an even

shade including throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth. for all floor. Putty, Primer & Paint as per approved list of

47 Painting TWO coats (excluding priming coat) on previously printed steel and other metal 102.00 SMT 87.26 Rs. Eighty Seven & Paise

surface with synthetic enamel paint, brushing to give an even shade including cleaning the Twenty Six Only

surface of all dirt, dust and other foreign matter including cleaning surface of all dirt ,dust and

other foreign matter

48 Painting TWO coats (excluding priming coat) on previously painted wood and wood based 85.00 SMT 106.96 Rs. One Hundred Six &

surface with enamel paint, to give an even shade including cleaning the of all dirt, dust and Paise Ninety Six Only

other foreign matter.

Description QUANTITY Unit RATE IN WORD Amount

49 Providing and fixing window having extruded aluminum Colour anodized section frame main 13.00 SMT 1696.73 Rs. One Thousand Six

outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size Hundred Ninety Six &

61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x Paise Seventy Three Only

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal member size 40mm

x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @

wt.of 0.456Kg /mt, @ Wt. 0.457 Kg / mt with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

50 Providing,fabrication and fixing M.S. Grill / GATE of approved pattern fabricated from M.S. 339.00 KG 72.61 Rs. Seventy Two & Paise

flats,square bars,round bars,channel ,square/round box pipe as per detail drawings.Rate is Sixty One Only

inclusive of welding with griding and applying of mild steel putty with hardener into groove to

have smooth surface,two coats of oil paint and one coat of yellow zinc chromate primer coat

of approved brand only.oil paint shall be luxol enamel paint of berger paint india limited or

asian paint apcolite premium gloss enamel of asian paint or dulux premium gloss enamel of

dulux paint and nerolac sythetics enamel of nerolac paint for all foor and at any height

only.M.S Grill/Gate material should be ISI mark only.

51 PROVIDING & FIXING PEG NAIL PATTI I AS PER DRECTED BY ENGINEER IN CHARGE 23.00 NO 300.00 Rs. Three Hundred Only

52 Providing and fixing both side polished machine cut KOTA STONE In Green Colour Shelves / 16.00 SMT 589.50 Rs. Five Hundred Eighty

Partitions 20mm to 25mm thick embaded in to wall at support including racking and finishing Nine & Paise Fifty Only

smooth the surface including cutting the stone as and where required etc. complete including

fully rounding of exposed edges etc. complete for ALL FLOORS. Material shall be used as

approved by GSPHCL

53 Providing and fixing both side polished machine cut Granite Shelves / Partitions 18mm thick 3.00 SMT 3322.50 Rs. Three Thousand Three

embaded in to wall at support including racking and finishing smooth the surface including Hundred Twenty Two &

cutting the stone as and where required etc. complete including rounding of exposed edges Paise Fifty Only

54 PROVIDING & FIXING DOOR FITTINGS ( ALDROP) I AS PER DRECTED BY ENGINEER IN 10.00 NO 150.00 Rs. One Hundred Fifty

55 PROVIDING & FIXING DOOR FITTINGS ( TADI) I AS PER DRECTED BY ENGINEER IN CHARGE 10.00 NO 100.00 Rs. One Hundred Only

Description QUANTITY Unit RATE IN WORD Amount

56 Providing & fixing in position ISI marked Rotational moulded Polyethylene double layer 8000.00 LTR 3.91 Rs. Three & Paise Ninety

cylindrical vertical storage tank (IS : 12701) water tank size inlcuding making inlet and outlet. One Only

Over flow and washout arrangement with G.I. connection inlcuding using necessary M.H. for

connection etc. complete with closed cover including applying two coats of oli painting

outside the tank etc.complete.

57 Constructing of cooking platform ( sandwich type ) 60cm width and 80cm high resting on 15.00 RMT 3757.57 Rs. Three Thousand Seven

thick sandwiched polish Granite Slab in C.M 1:3 with providing and fixing 25 mm thick rough Hundred Fifty Seven &

kota stone at bottom and 20 to 25 mm thick Polish Granite stone ( single piece/ telephonic Paise Fifty Seven Only

Black ) top and polished granite stone (single piece/ telephonic Black ) 20 to 25mm thick on

top with 15mm high machine cut polished granite round moulded facia patty including

polishing etc . complete as per drawing and specification without stainless steel sink

including necessary cutting for sink & making hole for gas pipe and fixing P.V.C bend of

58 Providing and Fixing Stainless Steel (304 Grade) 1mm thick Matt / Satin Finish Kitchen Sink of 7.00 NO 4269.00 Rs. Four Thousand Two

over all Minimum size 533mm x 457mm x 203mm deep having bowl Minimum size 470mm x Hundred Sixty Nine Only

Finishing with cement mortar 1:3 (1-Cement : 3-Fine Sand) etc. Complete. Rate including of

32mm dia. C.P. Brass Waste Coupling and 32mm dia. Rigid PVC Waste Pipe upto N.T. (S.S.

Kitchen Sink Shall be of Nirali, Navkar, Carysil or Krishna make Only) for ALL FLOORS.

59 Provinding and fixing 600mm x 450mm bevelled edge MIRROR or superior glass mounted on 8.00 NO 825.48 Rs. Eight Hundred Twenty

6mm thick A.C. sheet of plywood sheet fixed to wooden plugs with C.P. brass screws & Five & Paise Forty Eight

60 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour & Necessary Fittings 8.00 NO 909.08 Rs. Nine Hundred Nine &

etc. Complet as per Detailed Drawings, Specifications and as per the Instruction of Engineer In Paise Eight Only

charge. Materials used for the above items Must be list approved by G.S.P.H.C.L.

61 Providing & Fixing Shower with Arm. Rate are inclusive of all matreials, Labour & Necessary 5.00 NO 931.79 Rs. Nine Hundred Thirty

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of One & Paise Seventy Nine

Engineer In charge. The Model & Make of Shower with Arm Shall be as per the Approved Make Only

List of GSPHCL.

Description QUANTITY Unit RATE IN WORD Amount

62 Providing and fixing Wash Basin Cera Make Model No Cadal-S2040121 Or Jaquar Make Model 8.00 NO 1344.34 Rs. One Thousand Three

No:- ECS 805 single hole for piller tap with C.I or M.S. brackete painted white including cutting Hundred Forty Four &

holes and making good the same but including fitting (A) Vitreous chaina :(II ) Flat back wash Paise Thirty Four Only

basin 515mm x 410mm size in white colour including provinding and fixing C.P. brassa waste

coupling 32mm dia P.V.C water pipe M. I . fisher union 32mm dia C.P brass Pillar Cock 15mm

dia model flora Model No (1) F280001 With Flange make Handware.(2)F2013101 with flange

make CERA. (3 )27210190011 WITH FLANGE MAKE SOMANY. Com[plete including PVC

connection pipe from STOP COCK Heavy Duty with Exposed part and other accessories 15mm

dia (1) F850096+F280027850077 With Flange make Handware.(2)F2013351+F4050103 with

flangemake CERA.(3)272210190161+272150610031 to pillar tap and 32mm dia waste pipe up to

N.T etc. Complete. with 40mm dia c.p brass waste and M.I fisher and 15mm dia pillar cock.

63 Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling with 8.00 NO 2098.98 Rs. Two Thousand Ninety

Connection 32mm dia waste Pipe etc. Complete. Rate are inclusive of all matreials, Labour & Eight & Paise Ninety Eight

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Only

Instruction of Engineer In charge. The Model & Make of Urinal Shall be as per the Approved

Make List of GSPHCL.

64 Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all matreials, Labour & 5.00 NO 565.51 Rs. Five Hundred Sixty

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Five & Paise Fifty One

Instruction of Engineer In charge. The Model & Make of Health Faucets Shall be as per the Only

Approved Make List of GSPHCL

65 Construction brick masonary chamber for under ground C. I. Inspection chamber and bends 10.00 NO 2091.18 Rs. Two Thousand Ninety

with brick having crushing strength not less than 35 kg/cm2 in CM 1:5 RCC top slab with 1:2:4 One & Paise Eighteen Only

mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with 8 mm dia

steel at 15 cm. C/C and providng and fixing precast RCC cover size 0.60 x 0.45 x 0.07 m with

x 40 x 5 mm angle frame and foundation concrete 1:5:10 inside plaster 15 mm thick with

cement with a floating coat of neat cement walls and bed concrete etc. complete. Rates are

also includsive of out side 15 mm thick in C:M 1:3 from top of chamber and all side upto

Cms. deep below ground level (A) Inside dimensions, 455 mm. x 610 mm. and 450 mm. Deep

for multi purpose pipe line.

66 Extra over items 29 for every additional depth of 0.1M. of part thereof beyond 450mm depth for 10.00 NO 239.99 Rs. Two Hundred Thirty

Brick masonry chamber.(i) for 455mm x 610mm size. Nine & Paise Ninety Nine

Description QUANTITY Unit RATE IN WORD Amount

67 Providing,supplying and fixing Corrugated DWC HDPE pipe of Class SN8 Structured WAll 15.00 RMT 229.00 Rs. Two Hundred Twenty

polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) Nine Only

with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double WAll) for

non-pressure underground Sewerage & Drainage application as per EN:13476-3 including All

local and central taxes, transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the departmental stores etc. complete. (100 mm ID Dia) Including

Lowering, laying and jointing of class SN 8 structured wAll ( External Annular Corrugated &

Smooth Internal surface) Polyethylene Piping and fittings with the help of coupler ( on line / off

line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed

on the specified vAlley of the corrugation at the spigot end, lowering the same into the trench,

laying on the lower bedding (constructed at bottom of trenches) at prescribed gradient,depth

& alignment ,testing the water tightness of the joints, ensuring the continuity tests of

specified pipe segments etc. complete as per drawing,specifications & detailed engineering,

including carriage of pipes & fittings from site stacks to the place of laying etc. as per

direction of Engineer-in-charge. Pipe Shall be as per approved list of GSPHCL

68 Providing,supplying and fixing Corrugated DWC HDPE pipe of Class SN8 Structured WAll 40.00 RMT 396.00 Rs. Three Hundred Ninety

polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing ring) Six Only

with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double WAll) for

non-pressure underground Sewerage & Drainage application as per EN:13476-3 including All

local and central taxes, transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the departmental stores etc. complete. (150 mm ID Dia) Including

Lowering, laying and jointing of class SN 8 structured wAll ( External Annular Corrugated &

Smooth Internal surface) Polyethylene Piping and fittings with the help of coupler ( on line / off

line ) attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed

on the specified vAlley of the corrugation at the spigot end, lowering the same into the trench,

laying on the lower bedding (constructed at bottom of trenches) at prescribed gradient,depth

& alignment ,testing the water tightness of the joints, ensuring the continuity tests of

specified pipe Segments etc. complete as per drawing,specifications & detailed engineering,

including carriage of pipes & fittings from site stacks to the place of laying etc. as per

direction of Engineer-in-charge. Pipe Shall be as per approved list of GSPHCL

Description QUANTITY Unit RATE IN WORD Amount

69A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC insulted 75.00 Point 337.00 RS: Three Hundred

FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS wire for earth continuity in FIA Thirty Seven only

approved ISI mark medium class white colour 20/25 mm dia. embossed rigid PVC / casing pipe with

PVC/ casing fitting (20/25mm) fixed with adhesive solution erected on/in Brick Wall / slab along with

continuous G.I. fish wire to draw wires and laid in approved manner zari for PVC pipe 20/25mm / Open

casing pipe 20/25mm and boxes shall be filled with cement mortar and finishing the surface to match the wall /

ceiling complete with approved make 5/6 Amp. ISI mark modular type switch and accessories mounted in

G. G.I. company fabricated metallic box covered with appropriate front plate modules erected flushed with wall

/ ceiling with necessary modular lamp holder / modular ceiling rose / HD Connector 50 mm deep GI box if

require ( make & model approved by EIC and matching colour with switches accessories) as directed for

concealed wiring. (d) partial PVC pipe and drops in oval conduit / PVC casing capping erected flushed

on wall/ceiling complete Light point. Cat.-II. (Conductor resistance should be as per IS:8130/1984 )

Necessary sheet must be erected on all box to prevent mortar going into the box.& for ceiling light Point &

Junction box use deep Junction box of same PVC Pipe make . Length of point wiring must not increase than

10 mtr. For that necessary switch boards and their locations must be finalised before execution by agency

otherwise payment will not be done for extra long point. (For future extention, if required, agency has to erect

one higher size metal box and modular plate as per instruction of EIC. Cost of blank plate shall be paid as per

tender item) [Wire must be having box packing][This item include cleaning(inside/outside) of all GI switch

boards,electric point box,fan box,MCBDB & box cutting plaster & finishing SB for modular plate without any

69B For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step type 39.00 Point 515.00 RS: Five Hundred

Electronic fan regulator both having ISI mark) Cat.-II Fifteen only

69C For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-II 10.00 Point 407.00 RS: Four Hundred

69D For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-II 20.00 Point 219.00 RS: Two Hundred

70A Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID 200.00 Mtr. 23.00 RS: Twenty Three

PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed only

with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire to draw mains

with necessary fittings and junction boxes for following dia. 20 mm. dia.

70B For 25 mm dia. 300.00 Mtr. 32.00 RS: Thirty Two

71A Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking 150.00 Mtr. 21.00 RS: Twenty One

arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with accessories of only

PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of

following size .20mm

71B For 25mm 650.00 Mtr. 30.00 RS: Thirty only

Description QUANTITY Unit RATE IN WORD Amount

72A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade in existing pipe 1600.00 Mtr. 44.00 RS: Forty Four

to be erected on/in brick wall / slab along with continuous G. I. fish wire to draw mains laid in only

approved manner with plastering by cement mortar & finishing the surface to match the wall / ceiling

complete with FRLS PVC insulated wire for earth continuity. (Approved ISI make only) [a] 2 x

sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi

stranded conductor for earthing as per standard colour code. [Wire must be having box

packing] (Conductor resistance should be as per IS:8130/1984 )

72B For 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper 550.00 Mtr. 59.00 RS: Fifty Nine only

multi stranded conductor for earthing as per standard colour code. (with 20/25 mm dia. PVC pipe)

(for power board and computer board mains) [Wire must be having box packing] (Conductor

resistance should be as per IS:8130/1984 (In existing Pipe)

72C For 2 x 4.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper 150.00 Mtr. 82.00 RS: Eighty Two

multi stranded conductor for earthing as per standard colour code. (with 20/25 mm dia. PVC pipe) only

(for power board and computer board mains) [Wire must be having box packing] (Conductor

resistance should be as per IS:8130/1984) (In existing Pipe)

72D For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper 200.00 Mtr. 115.00 RS: One Hundred

multi stranded conductor for earthing as per standard colour code. (with 25 mm dia. PVC pipe) (for Fifteen only

MCBDB mains) [Wire must be having box packing] (Conductor resistance should be as per

IS:8130/1984) (In existing Pipe)

73 Providing & fixing 20mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, 25.00 Mtr. 30.95 RS: Thirty and Paise

PVC bushes saddle, Check-nuts etc. complete of following sizes. Ninty Five only

74 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, 25.00 Mtr. 37.14 RS: Thirty Seven and

PVC bushes saddle, Check-nuts etc. complete of following sizes. Paise Fourteen only

Description QUANTITY Unit RATE IN WORD Amount

75A Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft 2.00 Each 7025.00 RS: Seven Thousand

soil. Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod must be made from Twenty Five only

Corrosion free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed Brand,

Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X

100mm length, Terminal Should be made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal.The hot deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with

washer suitable for 14mm dia. hole must be provided at terminal. total minimum Weight(approx.) of

earth electrodewith inside conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time Back

Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm depth

and Cover should be heavy duty cast iron with required size of 300 mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit all

detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with earth

tester. Agency has to bring the earth resistance to at least 02 ohms & voltage between neutral &

Earthing upto 02 volt. Agency has to maintain earthing & its value for one year. Earthing must be done

in the presence of A.E. (GSPHCL)]

75B For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in 2.00 Each 276.00 RS: Two Hundred

earth pit (certificate for soil have to given by DEE / AE along with photographs) Seventy Six only

76 Supplying & erecting M.S./ G.I metal Box having 16 Gauge painted with red oxide be concealed in 4001.00 Sq. 5.80 RS: Five and Paise

wall with necessary plastering & finishing covered with 3mm thick Laminated sheet with grooving as Inch Eighty only

directed of following depth. 3" Depth

77A Providing following type of Modular Type Accessories mounted with 20 G G.I. company fabricated 230.00 Each 119.00 RS: One Hundred

metalic box, single mounting base frame covered with textured / metallic front plate, modules erected Ninteen only

with necessary connection. As desired by Engineer in charge. One No. SP 6 Amp. Cat-ii

77B For One No 5 pin plug Cat-ii 90.00 Each 119.00 RS: One Hundred

Description QUANTITY Unit RATE IN WORD Amount

77C For Electronic hum Free steps EME Fan regulator. Cat.-II 30.00 Each 322.00 RS: Three Hundred

Twenty Two only

77D For Blank Plate Single. Cat.-II 103.00 Each 15.00 RS: Fifteen only

77E For 16 Amp. SP one way switch.Cat.-II 30.00 Each 124.00 RS: One Hundred

Twenty Four only

77F For 6/16Amp. Universal socket .Cat.-II 30.00 Each 133.00 RS: One Hundred

Thirty Three only

78 Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant 6.00 Each 5536.00 RS: Five Thousand Five

indian standards ammended upto date. Supplying and fixing following way single phase MCB Hundred Thirty Six only

distrubution board of company fabricated with sheet box with powder coated inside and outside after

apply seven tank chemical process of MCBDB Door, Back side & Body must be made of 1.2 mm thick

CRCA sheet cover complete with suitable integral single piece construction tinned copper busbar and

link with all necessary interconnection and with necessary size MS frame for mounting MCBDB.

Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type

PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned Copper/Brass make neutral &

Earthing link with isolation & Protecting Cover for 240 Volts on surface / recess complete with loose

wire box, terminal connectors for all incoming and outgoing circuits, with suitable size FRLS PVC

insulated copper conductor up to terminal blocks and internal connection, tinned coppper bus bar,

no. tinned copper neutral link, tinned copper earth bar, din bar, detachable gland plate,

interconnections, powder painted including earthing etc. Single phase incoming and horizontal single

phase outgoing. For 16 Way MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking capacity of 10 KA), MCB

40 Amp. double pole switch (C curve confirms to IS:8828 having breaking capacity of 10 KA)

and S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate on 240 Volt A.C. power. (6

Amp:- 4 Nos., 16 Amp:- 4 Nos. & 25 Amp: 4 Nos.) Cat.-III

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected in

line & level with spirit level and finish the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering / marking on box

done with red colour radium sticker as per site requirement and instructions given by EIC on site. Font

/ number size given by EIC on site as per requirement]

Description QUANTITY Unit RATE IN WORD Amount

79 Providing ad erecting approved make Three phase Double Door Horizontal / Vertical type (as 1.00 Each 8718.00 RS: Eight Thousand

per site requirement and EIC instruction) outgoing per phase outgoing type (PPI) metal clad Seven Hundred Eighteen

D.B. as per relevant Indian standards amended up to date. Supplying and fixing following way only

Three phase MCB distribution board with company wire links for internal connections having

colour code and with suitable lugs and company fabricated with sheet box with powder coated inside

and outside after apply seven tank chemical process of MCBDB Door, Back Side & Body must be

made of 1.2 mm thick CRCA sheet cover complete with suitable integral single piece construction,

tinned copper busbar and link with all necessary interconnection and with necessary size GI frame (if

required for surface type) for mounting MCBDB. Manufacturer must be provided (1) IP 43 and as per

IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate

(3) Tinned Copper/Brass make neutral & Earthing link with isolation & Protecting Cover for 440 Volts

on surface / recess complete with loose wire box, terminal connectors for all incoming and outgoing

circuits, with suitable size FRLS PVC 10mm2 insulated copper conductor with Pin type lug up to

terminal blocks and internal connection, tinned copper bus bar, 4 nos. tinned copper neutral link,

nos. tinned copper earth bar, din bar-4 nos., detachable gland plate,interconnections, including

earthing etc. Three phase incoming and single phase outgoing. Total quantity of wire link: 13 Nos. For

Three phase 8 Way Double Door PPI MCBDB I/C:- 25Amp FP MCB 10KA, C-25A DP ELCB, 30a,

10KA - 03nos & O/G:- C-curve 6-32 Amp SP MCB :- 18Nos.

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected in

line & level with spirit level and finish the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering / marking

on box done with red colour radium sticker as per site requirement and instructions given by

EIC on site. Font / number size given by EIC on site as per requirement]

80 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 voltage, 28.00 Each 111.00 RS: One Hundred

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting Eleven only

suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

81 Providing and erecting PVC body surface mounting LED Bulk head type 9 watt Lighting Fitting with 3.00 Each 780.00 RS: Seven Hundred

electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen output from luminaire 720 lm, input Eighty only

voltage range 160-270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver having efficiency

>=80lm/w, -20 deg C to + 60 deg C working temperature, AL frame with Beam Angle 120 deg.

Description QUANTITY Unit RATE IN WORD Amount

82 Supplying and Erecting LED indoor fitting of approximately 4feet long with LED of wattage 0.2W 80.00 Each 370.00 RS: Three Hundred

to 0.5W assemble on single MCPCB with housing use as a heat sink shall be made from Aluminum Seventy only

extrusion having enough strength (sample must be approved by EIC) with polycarbonate diffuser with

following specification: (A) Company mark/name on the fitting.(B) Rated input voltage and frequency:

220V to 240 VAC ; 50Hz.(C) Rated input wattage: max. 24w(D) Rated input current : 0.2 Amp (E)

Power Factor : Min. 0.90(F) ATHD : Max. 15%(G) Rated Luminous flux: Min. 2420 lm

(H) CCT: 6500K(I) CRI: Min. 80Ra(J) Driver Efficiency: Min. 80%(K) LED life span: Min. 50000 Hrs @

L70(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.(M) Surge protection : Min. 2KV

(N) IP rating: IP 20(O) IK rating : IK 02(P) Short circuit , Open circuit & Reverse Polarity Protection

must be provided(Q) Fixing clamp design & strength should be sufficient to hold the fitting erected on

wall or ceiling.(R) 3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit 4 yrs free

replacement Guarantee for complete Fixture) [Approval will be given strictly subject to item

83 Providing and erecting max. 10 W LED battern having main housing aluminium extruded and front 2.00 Each 309.00 RS: Three Hundred

cover of polycarbonate. Electrically and photomatry parameters are as under:240 V, 50 Hz. System Nine only

wattage.:10W+10%, PF>=0.95, system lumens min. 1000, CCT- 3000K to 6500K, CRI>=80,

THD<=15%, Delivery efficiency>=85%, LM 80 certified LED, 30000 Hrs@ L70, Electronic CC driver,

insulated copper wire, for internal wiring, IP20 Operating voltage:160 to 270 V, Surge-2 KV, length of

this fitting should be 2ft.Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) Tube Light with integral driver 8 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

84 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I, 50 Hz. 50.00 Each 1929.00 RS: One Thousand Nine

Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Operating Voltage: 180 Hundred Twenty Nine

to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5) RPM: minimum 330, only

(6) Service value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty premium quality

Ball bearing: Two, (9) Total Body: Top & Bottom should be alluminium, (10) Blade: Aluminium approx

1.1 mm thick, (11) Colour: White high grade powder coating, (12) Canopy: Two Nos. Heavy duty, (13)

Condenser: min 1.5 MFD (15% Tolerance )as per is 1709-1984, Aluminium body premium quality,

Branded make,(14) Down road: up to 1.0 mtr as per site requirment, (15) Required fixing

accessories, (16) 3 core 0.75 sq.mm ISI wire as per site requirment, (17) No vibration and noise due

to mechanical parts. (Agency has to erect safey wire with ceiling fan and checked with EIC) (OEM

has to approved model as per tender specification and tested at ERDA) (Necessary test reports

should be submitted strictly at the time of approval. Sample approved by EIC subject to above

specification only)

Description QUANTITY Unit RATE IN WORD Amount

85 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / M.S. pipe down rod erected 25.00 Rn. 107.00 RS: One Hundred

duly painted for fan complete with necessary 24/0.2 flat 3 core flexible Core with earthing. The down Mtr. Seven only

rod thickness, hole, locking arrangement, construction, powder coating, colour shed should be same

as original down rod brought with ceiling fan. For that agency has to give original down rod sample to

fabricator and one sample down rod should be approved with EIC. After approval given by EIC

agency can use the down rod as per approved sample. If without approval down rod will be erect on

site, agency has to replace them with own cost.

86 Supplying & erecting approved make low noise Decorative exhaust fan having size150- 200 mm 12.00 Each 1687.00 RS: One Thousand Six

with 1350 RPM with round / square frame ABS/metalic body with Grill / inbuilt lowers. (make and Hundred Eighty Seven

model approved by EIC) only

87 Providing and erecting 415 Volt MCB four pole motor & inductive load(C Curve) having 10 KA 1.00 Each 730.00 RS: Seven Hundred

Breaking capacity and confirms to IS : 8828 in existing metal box having following capacity. (a) 63 Thirty only

88 Providing and erecting 415 Volt MCB four pole motor & inductive load(C Curve) having 10 KA 6.00 Each 662.00 RS: Six Hundred Sixty

Breaking capacity and confirms to IS : 8828 in existing metal box having following capacity. (a) 40 Two only

89 Providing and erecting 240 volt MCB double pole switch for M&I(C Curve) having 10 KA Breaking 12.00 Each 327.00 RS: Three Hundred

capacity and confirms to IS : 8828 in existing with earthing terminal having following capacity. with Twenty Seven only

necessary quarter Numbering with oil paint by Painter. (a) 40 Amp Capacity.

90 Providing and erecting 240 volt MCB double pole switch for M&I(C Curve) having 10 KA Breaking 2.00 Each 599.00 RS: Five Hundred Ninty

capacity and confirms to IS : 8828 with same company metal box with earthing terminal having Nine only

following capacity. with necessary quarter Numbering with oil paint by Painter. (a) 40 Amp

91 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V 6.00 Each 111.00 RS: One Hundred

A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS Eleven only

8828/1996 with ISI Mark

92 Supply, Installation, Testing & Commissioning of Three Phase, 440 V Surge Suppressor protection 1.00 Each 6319.00 RS: Six Thousand Three

Device (SPD) & 40 Amp TPN MCB (or As per SPD OEM guide line for the protection of SPD which is Hundred Ninteen only

erected such a way that it can be operated easily) SPD must be capable to protect all electrical and

electronics equipments if SPD blast or fuse then the panel builder must have replace it soon during

defect liability period.The Detail Specification of SPD are As per Attached sheet with Annexture -A(E).

(Hakel,ikra,OBBO make) (With Five year Gaurantee/warranty)

Description QUANTITY Unit RATE IN WORD Amount

93 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 25 x 25 x 3 mm 1.00 Sq. 2289.00 RS: Two Thousand Two

red oxide painted angle iron frame suitable for fixing ICDP SWITCH and energy meter (contractor Mtr. Hundred Eighty Nine

shall make approved drawing of Bakelite sheet To arrange required No. of Energy meter & ICDP only

switch -busbar etc. as per Actual space available in electrical room at site)

94 Providing, erecting, fabricating the M.S. structure as per requirement of site as per structure design 10.00 Kg. 74.92 RS: Seventy Four and

Including proper size approved by EIC of M.S. angles, flats, bars, square pipe, channels, sections Paise Ninty Two only

(Tata,Zindal,Asian,Jsi Make) complete with cutting, welding, grinding and finishing duly painted with

Asian/Nerolac make premium quality oil paint and true care red oxide metal primer,asian paint make

with erection on site as per direction of engineer in charge with necessary grouting cementing,

plastering and finishing complete. All hole opening of square pipe end must be closed with M.S plate

welding. Payment will be done on KG as per Actual weight.

95 Providing and erecting metalic danger notice board for MEDIUM VOLTAGE installation to be 1.00 Each 69.00 RS: Sixty Nine

erected as per I.S. only

96 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 50.00 Mtr. 359.00 RS: Three Hundred

1.1 KV. to be laid on wall with necessary clamps 1.00 mm thick to be laid 90 cms underground with Fifty Nine only

1.00 mm thick G.I heavy duty grade or in existing trench / pipe at road crossing or floor of following

size of cables. For 4 core 4 Sq. mm

97A Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Aluminium conductor cable for 200.00 Mtr 187.00 RS: One Hundred

1100 volt to be laid 90 cms. Under ground or to be laid on wall with 1.00 m.m thick G.I. heavy guage Eighty Seven only

cable clamp or in existing DWC pipe underground or road crossing or floor .For 4 core 25 Sq. mm

97B For 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 150.00 Mtr. 215.00 RS: Two Hundred

98A Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 (part 24) 20.00 Mtr. 108.00 RS: One Hundred Eight

2018)) with minimum load required of 450N capacity with anti rodent and ultra violet material only

properties with necessary connecting accessories of same material at required depth to be laid

cms. under ground for laying of cable below ground / road surface for enclosing cable and back filling

the same to make ground as per original. (A) For Outer dia. 50 mm and Inner dia. 38 mm. ) (Test

Certificate to be Submitted)

98B For Outer dia. 90 mm and Inner dia. 75 mm. ) (Test Certificate to be Submitted) 20.00 Mtr. 141.00 RS: One Hundred Forty

99A Providing & fixing double compressed heavy duty flange type brass cable gland with rubber ring for P 2.00 Each 61.00 RS: Sixty One only

V C insulated armoured cable complete with outgoing tails, insulating tape etc. For following size

cables.For 2 to 4 core 25 Sq. mm (Sigma, MCI, Comet, HMI Make Only)

Description QUANTITY Unit RATE IN WORD Amount

99B For 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) (Sigma, MCI, Comet, HMI Make Only) 2.00 Each 75.00 RS: Seventy Five

100A Providing & fixing Solderless crimping type Aluminium lugs conforming to IS suitable for cable of 15.00 Each 20.00 RS: Twenty only

following size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. For 35/50 Sq.mm

100B For 16/25 Sq.mm. 16.00 Each 15.00 RS: Fifteen only

101A Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed copper 90.00 Mtr. 16.00 RS: Sixteen only

conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if required. For One wire 1.50 sq. mm

101B For One wire 2.50 sq. mm 100.00 Mtr. 26.00 RS: Twenty Six

101C For One wire 4.00 sq. mm 75.00 Mtr. 35.00 RS: Thirty Five

101D For One wire 6.00 Sq.mm. 50.00 Mtr. 53.00 RS: Fifty Three

101E For One wire 10.00 sq. mm 30.00 Mtr. 87.00 RS: Eighty Seven

101F For One wire 16.00 sq. mm 20.00 Mtr. 134.00 RS: One Hundred

Thirty Four only

101G For One wire 25.00 sq. mm 20.00 Mtr 223.00 RS: Two Hundred

Twenty Three only

102 SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total consumption of 2.00 Each 7395.00 RS: Seven Thousand

maximum 120 W with single piece die cast aluminium housing, LED's mounted on high quality metal Three Hundred Ninty Five

core based PCB with extremely precison designed heat sink, complete with IP66 protection Class, only

with polycarbonate / Toughened glass cover. The fixture should be suitable for pole/bracket mounting.

The fixture to comply both LM79 and LM 80 guidelines with LED minimum 110 lumen/watt with L70 at

50,000 hrs, provided with high quality polycarbonate Seperate lenses for better light distribution.The

watt capacity of Each LED must be >=4W in street light fitting. The Fixture Should be able to be Pole

Mounted and also bracket mounted, provided with high quality potted driver for protection against,

high and low Voltage cut Off, opertional for high amibient and high humid envirnoments, THD of driver

should be less than 10% and P.F > 0.95. Also the Fixture should meet the following technical

criterias. Operating range Voltage 160 to 270 V, system efficiency > 110 lm/w, CCT > 5000K, CRI

>65, beam angle 120 deg, 4kV integral & non integral surge immunity level at least 10 KV non

integral... Flood Light lumens shall be more than 13200. (Note:- The manufacturer / authorized

Channel partner of the manufacturer has to submit 5yrs free replcement Guarantee for complete

Description QUANTITY Unit RATE IN WORD Amount

103 Providing , erecting , testing and commissioning Insu Intelligent Streetlight Controller specially 1.00 Each 20255.00 RS: Twenty Thousand

design for energy saving in conventional streetlight system ( Cat. No. SLC-03-1Ph-7.5KVA- Two Hundred Fifty Five

20Amp/Cat NoSLC-03-1 ph-15 KVA 20 amp per phase) having technial specification ,1 phase 2 wire, only

230 V AC/ph +/- 25% R Y B N 2 Wire supply System.50 Hz (+ / - 10 %), 2 W (Stand By) to 4 W (at

street light operation)consuption, Advance 8 bit micro controller, switching on longitude and latitude

base, accaracy of +- 1 minute per month. with inbuilt battery, with battery life of more than 8 years,

with speicial device which hold the parameter for more then 10 years without any power and

password protected. 16 character and two line LCD display with backlight, 4 keys user friendly

keyboard system, 7500 VA feeder pillar capacity, 63/100 amps isolator ,3 Outpus with termination

40/63 Amps 2/3 pole contactor , 3X16 Amps with F R cable provision to by pass by way of relay

operation through auto/manual switch, 2 to 55 centigrade and humidity 90 % non condensing Outdoor

type installation on pole with clamps.(Provided with clamps and nut bolt) or wall or floor, three locking

system flush type internal panel lock, external pad lock and internal U clamp locking systems for

against theft of panel. having 17/25 Kg weight ,16/18 guage MS weather proof with industrial exterior

powder coated with 7 tank process RAL

104 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out 3.00 Each 890.00 RS: Eight Hundred

approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E), DIN rail for mounting Ninty only

mob & hinged doors as per requirement having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable clamps& earth bolt of following size of box.

105 Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having capacity 6 kg Filled 3.00 Each 1991.00 RS: One Thousand Nine

with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Type, UGTS Hundred Ninty One only

Pressure Gauge, Can Height 530 mm, Diameter 150 ± 10mm, Discharge Time 24 Sec, Controllable

discharge mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on Class A,B & C

and electrically started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig welded,

EPDM(Ethylene Propylene Diene Monomer) Rubber Hose with both end Aluminum clamped, Internal

Coating - Epoxy Powder coating, External Coating - Pure Polyester Powder coating (UV

Resistant),Brass forged CE Marked valves with NRV & Auto Safety Release with safety Pin is of SS

material, Made up from 1.6mm thick sheet, Extinguishers confirmed to IS 15683:2018 and ISI

marked. Referance Weight:-Gross Weight 8.9 Kg, Empty Weight 2.9 Kg, 1. Necessary certificate &

and guarantee must be attached, 2. OEM has to provide wall mounting heavy duty bracket/clamp,

screw, hardware for installation. 3.Following printed marking Manufacturing Date and Expiry Date

must be mention on Extinguisher 4. Refilling period must be of 3 Years. Following Printed marking on

equipment must be required:- Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No,

Serial no, Mfg Month, Refilling Due. [with necessary numbering / marking with oil paint by painter as

instructions given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

Description QUANTITY Unit RATE IN WORD Amount

106 Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire Extinguisher, filled with Co2 3.00 Each 6526.00 RS: Six Thousand Five

Gas as per IS 15222, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Hundred Twenty Six only

Electrical non-conductor Polyethylene Flat Horn with Diffuser Nozzle for dispersed discharge of CO2,

Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started

Fire, Fire Rating 55B, Internal coating is not applicable & External coating is of enamel spray painting,

Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot

spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO ( Petroleum and

Explosives Safety Organization) APPROVED, Minimum Wall Thickness 4 to 4.2 mm, Extinguishers

confirmed to IS 15683:2018 and ISI marked. Referance Weight:-Gross Weight 16.4, empty weight

11.9 Kg, 1. Necessary certificate & and guarantee must be attached, 2. OEM has to provide wall

mounting heavy duty bracket/clamp, screw, hardware for installation. 3.Following printed marking

Manufacturing Date and Expiry Date must be mention on Extinguisher 4. Refilling period must be of

Years. Following Printed marking on equipment must be required:- Model No, Capacity, Gross

Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due. [with necessary

numbering / marking with oil paint by painter as instructions given by G.S.P.H.C.L engineer] (Make:

KANEX, MINIMAX, CEASEFIRE)

Total CIVIL RS.

Total ELECT RS.

Signature of Contractor DY.Executive Engineer Executive Engineer

Ahmedabad. Ahmedabad.