REPAIR/ MAINTENANCE OF INTERNAL ELECTRIFICATION, SECURITY LIGHTS AND SOME E/M APPLIANCES AT NHO UNDER AGE B/R-III OF CLEMENT TOWN, DEHRADUN

Amount

Dismantling and taking down carefully copper/ aluminium point wring (light, fan socket, power) complete fitting such as switches, ceiling roses, pendents, lamp holder, light fittings etc including CI/ pressed steel terminals, switch box etc removing materials from site, and making good the disturbed surface of wall floor etc. to match with the existing surfaces of wall/ floor complete all as specified & directed.

Dismantling and taking down carefully sub-main wiring of any size including wooden batten etc and making good the disturbed surfaces of wall/ floor to match the existing wall/ floor etc complete all as specified & directed.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed stranded copper conductor cable single core 1100 volt grade in and including rigid PVC conduitconcealed/ casing caping/Surface conduit and cutting chases of suitable girth where required on brick/ concrete conduit accessories with provision of hard glossy surface sheet top cover (Hylem sheet) plate with 1.5 sq mm PVC insulated unheathed stranded copper conductor cable as earth wire connected with main common earth dolly complete all as specified and directed for the following:- One light/ fan/bell point controlled by one way piano switch 5 Amps.

All as per item no 3 here-in-before but one 3 pin/ 5 pin socket out let on same board controlled by one, one-way piano type switch complete all specified and directed.

All as per item no 3 here-in-before one 3 pin/ 5 pin 5 AMP socket out let on independent board controlled by one, one-way piano type switch complete all as specified and directed.

M&L for point wiring for one 5/6 pin 15 AMP socket out let on independent board controlled by one, one-way 15 AMP flush type switch with 2.5 sq mm PVC insulated unsheathed stranded copper conductor cable in and including rigid PVC conduit surface/ concealed type surface fitting and accessories with provision of Hylem plate with 2.5 sq mm PVC insulated unsheathed stranded copper conductor cable as earth wire and wire connected with main earth dolly complete all as specified & directed.

S&F switch piano, flush type single pole one way 05 Amp complete all as specified & directed.

Supply and fixing switch piano flush type single pole one way 15 Amp complete all as specified & directed.

S&F socket outlet 2 in 1, 3 pin, 5 Amp complete all as specified & directed.

S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified & directed.

Material and labour point wiring for modular fitting with 1.5 sq mm PVC insulated, unsheathed stranded copper conductor cable single core 1100 volt grade in and including rigid PVC conduit concealed/casing caping/Surface conduit and cutting chases of suitable girth where required on brick/ concrete with 1.5 sqmm PVC insulated unsheathed stranded copper conductor cable as earth wire connected with main common earth dolly for one light/fan/bell point controlled by one Modular switch complete all as specified and directed.(Note: Quoted rate of tenderer shall be including all necessary modular accessory like metallic flush box, cover plate with frame as per site requirement.)

All as per item no 3 here-in-before but for One 3 pin/ 5 pin 5 AMP socket out let on same board controlled by one, one-Modular switch complete all as specified and directed.

All as per item no 3 here-in-before but for one 3 pin/ 5 pin 5 AMP socket out let on independent board controlled by one, one-Modular switch complete all as specified and directed.

Material and labour for modular fitting point wiring on independent board with 2.5 sq mm PVC insulated, unsheathed stranded copper conductor cable single core 1100 volt grade in and including rigid PVC conduit medium grade 20 mm dia concealed/ casing caping/Surface conduit and cutting chases of suitable girth where required on brick/ concrete with 1.5 sqmm PVC insulated unsheathed stranded copper conductor cable as earth wire connected with main common earth dolly complete all as specified and directed for one light/fan/bell point controlled by one Modular switch.(Note: Quoted rate of tenderer shall be Including all necessary modular accessary like metallic flush box, cover plate with frame as per site requirement.)

M&L modular type switch, one way 6 Amps , 1 module complete all as specified and directed.( Make-Anchor/ legrand/MK)

M&L modular type socket 5 pin, 6 Amps combined 2 module complete all as specified and directd.( Make- Anchor/legrand/MK)

M&L modular type socket 5 pin, 16 Amps combined 1 module complete all as specified and directd.( Make- Anchor/legrand/MK)

M&L modular type switch, one way 16 Amps, 2 module complete all as specified and directed.( Make- Anchor/legrand/MK)

M&L modular type fan regulator step down 120 Watt, 2 module complete all as specified and directed.( Make- Anchor/legrand/MK)

S&F call bell AC 230 volts single pole complete all as specified & directed.

S&F ceiling rose surface bakelite 65x25 mm dia having three terminals complete all as specified & directed.

S&F call bell multi music type AC 230 volts single pole complete all as specified & directed.

Taking down the geyser from its existing position and refixing the same after repair/replacement of any parts complete all as specified & directed. (Note :-(Any parts replaced shall be measured & paid under respective item of Sch 'A').

Supply and fixing Geyser assembly of copper of 06/08/09 holes with nut, bolts, slud, washer for 25 ltr capacity complete all as specified & directed.

Supply and fixing Geyser assembly of copper of 06/08/09 holes with nut, bolts, slud, washer for 50 ltr capacity complete all as specified & directed.

S&F non return valve15mm dia for geyser complete all as specified & directed.

S&F in repair inner shell for Geysers of 25/35 Ltr capacity made out of stainless steel complete all as specified & directed.

S&F in repair inner shell(tank) for Geysers of 50 Ltr capacity made out of stainless steel complete all as specified & directed.

S&F in repair of Heating element 3 or 4 KW capacity, thread type for solar water heater complete all as specified & directed.

Supply and fix thermostat switch (adjustable type) for Geysers complete all as specified & directed.

Supply and install electric water heater storage type geyser (ISI mared) 5 star rated inner container with Stainless steel 1500 watt of capacity 25 Ltr complete grouting on wall with suitable size of nut & bolts washer as required at site complete all as specified & directed. Make:Bajaj/Havells/Crompton

Disconnecting electric connection & taking down defective ceiling fans/ Exhaust fans of any sweep and make carefully and dismantling for checking of bearing / bush replacement of defective items oiling, greasing and re-assembling complete all as specified & directed.Note:- (Any item required will be measerured & paid separately under relevent item of sch. 'A')

Hanging/fixing only repaired ceiling fan/exhaust of any sweep and connecting up with and including 3 core flexible PVC copper cable of suitable size from fan to ceiling rose complete all as specified & directed.

Rewinding of ceiling fans of 1200/1400 mm sweep with super enameled copper wire of existing gauge including varnishing, insulation, taping, writing MES No with synthetic enameled paint and testing complete all as specified & directed.

Rewinding of exhaust fan of 300/350/450 mm sweep with super enameled copper wire of existing gauge including varnishing, insulation, taping, writing MES No with synthetic enameled paint and testing complete all as specified & directed.

S&F ball bearing for ceiling fan/exhaust fan of any sweep as required at site complete all as specified & directed.

S&F gun metal bush bearing for any sweep of sweep ceiling fan/exhaust fan as required at site complete all as specified & directed.

S&F in replacement exhaust fan /fresh air fan 250 mm sweep plastic body complete all as specified & directed.

S&F in replacement exhaust fan /fresh air fan 300 mm sweep Matllic body complete all as specified & directed.

S&F solar rod ETC type 500 Ltrs cap solar water heater complete all as specified & directed.

Taking out Solar heater rod carefully descaling with proper descaling solution and fixing properly including testing complete all as specified & directed.

S&F MCCB 63Amps, 16 KA, 3 Pole 415 V complete all as specified & directed.

S&F MCB TPN 63 Amps 3 phase 10 KA, C series complete all as specified & directed.

S&F MCCB 100 Amps, 16 KA 3 Pole 415 V adjustable type complete all as specified & directed.

S&F MCCB 160 Amps, 25 KA 4 Pole 415 V adjustable type complete all as specified & directed.

S&F MCCB 200 Amps, 25 KA 4 Pole 415 V adjustable type complete all as specified & directed.

S&F MCCB 250 Amps, 36 KA 4 Pole 415 V adjustable type complete all as specified & directed.

S&F sheet metal enclosure double door for MCBs DB TPN (Three Pole and Neutral) 415 Volt AC 4 ways complete all as specified & directed.

S&F sheet metal enclosure double door for MCBs DB SPN (Single Pole and Neutral) 240 Volt AC 8 way with 200 Amps rated busbar complete all as specified & directed.

S&F load line DBs (TP&N) vertical fitted with Bus bars neutral links Blanking plates double door suitable for TP/ FP G Frame MCCB as incommer and out going MCBs 4 ways complete all as specified & directed.(Note:- MCCBs and MCBs shall be measured and paid separately)

S&F sheet metal enclosure enclosure double for MCBs DB SPN (Single Pole and Neutral) 240 Volt AC 4 way with 200 Amps rateed busbar complete all as specified & directed.

Supply and fix MCB SPN 40 Amp, c series complete all as specified and as directed. . (Make: Legrand/Havells/L&T)

Supply and fix MCB SPN 20 Amp c series complete all as specified and as directed. (Make: Legrand/Havells/L&T).

Supply and fix MCB SPN 63 Amp c series complete all as specified and as directed. (Make: Legrand/Havells/L&T).

Supply and fix MCB SP 6 To 32 Amp c series complete all as specified and as directed. .(Make: Legrand/Havells/L&T)

S & F in replacement LED flood light 50 Watt complete all as specified and directed.

S & F in replacement LED flood light 100 Watt complete all as specified and directed.

S&F sub main wiring two single core 6 sq mm PVC insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) 20 mm dia medium grade alongwith 4 Sq mm PVC insulated unheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

S & F LED wall security light 45 Watt with bracket and clamps complete all as specified and directed.

Supply and fixing LED Mirror light 1ft 7watts as per sample complete all as specified & directed. (make C&S /Crompton/Havells)

S& F Decoretive gate light (size width 200 Xhight 227)mm made up of high grade unbreakable polycarbonate material suitable for retrofit LED bulb complete with IP 65 protection complete all as specified & directed.

S& F Decoretive gate light (size width242 X hight250)mm made up of high grade unbreakable polycarbonate material suitable for retrofit LED bulb complete with IP 65 protection complete all as specified & directed.

S & F LED post top energy saving ,environmental friendly ,long life aesthetically designed with symmetical light distribution, spun aluminium landscape luminium landscape luminai with high power LEDs 35watt as light source,fixing arragement complete all as specified and directed.Havlls cat part No CORLPT35WLED 757PSYMTOPC and equivalent Crompton/ C&S as approved by GE).

S& F LED post top post top ideal to lit up parks garden ways and gate light 20 Watt complete with IP 65 protection complete all as specified & directed. Crompton cat part No LPT20WW and equivalent Havlls/ C&S as approved by GE).

Supply and fixing or laying through pipe 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor with aninner sheathing of PVC tape and over all PVC sheathed twin core cable 10 sqmm 2 Core complete all as specified & directed.

Supply and fixing or laying through pipe 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor with aninner sheathing of PVC tape and over all PVC sheathed twin core cable 6 sqmm 2 Core complete all as specified & directed.

Excavation in trenches in any type of soil and not exc 1.5 m wide and n.exc 1.5 m in depth for laying of cable and fixing poles, stays etc and getting out complete all as specified and directed

Returning , filling in including spreading leveling, watering and well ramming in layers not exceeding 25 cm thick with excavated soil complete all as specified and directed.

M&L river washed and screeened dry fine sand filling in trenches below and above / around under ground cable for cable protection including punniing around cable complete all as specified and directed.

M&L for well brunt bricks sub class 'B' in old size as cable protection laid flat width wise complete all as specified and directed.

Removing excavated material (surplus soil) to a distance not exceeding 50 mtrs and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified & directed.

Supply and fix junction box made from SMC/FRP sheet ready made of size 300 X200X 100 mm having 100 A capacity for RYB and neutral with aluminum busbar with 4 way connector fixed to pole /Wall with MS clamp 25 X 5 mm and nut bolts including MCB SP 6 Amp 10 KA 240V with aluminium lugs - 01 No complete all as specified & directed. Make Legrand/C&S/Havells).

S&F PVC insulated, armoured, heavy duty electric cable with aluminium conductor 1100 Volt grade cross sectional area 10 Sqmm 4 core complete all as specified & directed.

S&F PVC insulated, armoured, heavy duty electric cable with aluminium conductor 1100 Volt grade cross sectional area 16 Sqmm 4 core complete all as specified & directed.

S&F PVC insulated, armoured, heavy duty electric cable with aluminium conductor 1100 Volt grade cross sectional area 10 Sqmm 2 core complete all as specified & directed.

Supply and fix electronic fan regulator step down type single module suitable for 1200 mm sweep complete all as specified & directed.

Supply and fix suspended LED luminaire 20 Watt with continuous mounting end cap complete all as specified and directed. Make: Havells Cat No CONSTA544LP20WLED830SPMMAWH / Crompton /c&s Cat No LHECDOL5PW1W020).

Supply & fix capacitor 2.5 mfd for fan complete all as specified & directed. Make – Havells/Universal/Asian or equivalent .

Supply and fix capacitor 3.15 / 4 mfd for fan complete all as specified & directed. Make – Havells/Universal/Asian or equivalent .

Supply and fixing driver suitable for LED 36/40 watt complete all as specified & directed. Make- Havells/ Crompton / C&S

Supply and fixing driver suitable for LED 70/90 watt complete all as specified & directed. Make- Havells/ Crompton / C&S

Supply and fixing aluminium strip 20 x3.15 mm in proper position on wall with saddles and fixing screws complete all as specified & directed.

Supply and fix PVC connection 15 mm dia,450 mm long for hot water complete all as specified & directed.

Supply and PVC connection 15 mm dia,600 mm long for hot water complete all as specified & directed.

Supply and fix thermostate(adjustable type) for Geysers complete all as specified & directed.

Supply and fix Heating element 2 KW capacity, straight, triangular type for Geysers complete all as specified & directed.

Supply and fix Heating element 2 KW capacity, Z- triangular type for Geysers complete all as specified & directed.

Supply and fix LED 5 watt, as per sample complete all as specified & directed.

Supply and fix LED 9 watt, as per sample complete all as specified & directed.

Supply and fix LED 12 watt, as per sample complete all as specified & directed.

Supply and fix LED bulb warm white 3/5Watt thread type complete all as specified & directed.

Supply and fix batten holder for 230 Volt supply complete all as specified & directed.

Supply and fix Bell push flush type single pole 5/6 Amp complete all as specified & directed.( Make-Anchor/ legrand/MK)

Supply and fix socket outlet 5 pin 5/6 Amp complete all as specified & directed.( Make-Anchor/ legrand/MK)

Supply and fix socket outlet 15/16 Amp complete all as specified & directed.( Make-Anchor/ legrand/MK)

Supply and fix modular Bell push flush type single pole 5/6 Amp complete all as specified & directed.( Make-Anchor/ legrand/MK)

Supply and fix PVC insulated flexible copper wire 3 core of size 40/.0076 complete all as specified & directed.( Make-Anchor/ legrand/MK)

Supply and fix switch Modular type single pole16/20 Amp complete all as specified & directed.( Make-Anchor/ legrand/MK)

Supply and fix modular socket outlet 5 pin 6/10 Amp complete all as specified & directed.( Make-Anchor/ legrand/MK)

Supply and fix three pin top switch Modular type single pole16/20 Amp complete all as specified & directed.( Make-Anchor/ legrand/MK)

Supply and fix modular socket outlet 20Amps with 25 Amp MCB. Three pin 16/20 Amps complete all as specified & directed.( Make-Anchor/ legrand/MK)

Supply, installation in repair, testing commissioning and sealing of temper proof electronic energy; meter 230/240 Volt capaciaty 10-40Amps (Single phase) optical port feature including electric connection incoming and outgoing with PVC insulated unsheathed multi stranded copper conductor FR cable single core 1100 Volt grade of size 6 Sqmm with proper tinned copper lugs and rigid PVCconduit medium grade 20 mm dia surface concealed where required and taking out of old electric meter and unserviceable cable complete all as specified and directed.

S& F in replacement wall mounted LED batten 20watt with integrated electronic driver, aluminium housing and polycarbonate diffuser complete all as specified and directed. (Make: Havells Cat No LUMILINEPLUSBS20WLED865SPCSS/ Crompton Cat No LCTLN-20-CDL/ Equivalent in Philips)

S & F in replacement LED suspension light 40 watt with integrated electronic driver, diffused optics, 1200 mm long with continuous mounting end cap including making electrical connection and fixing using appropriate size fastners complete all as specified and directed. Make: (Havells Cat Part No CONSTA1144LP40WLED830SPMMAWH/ Crompton Cat No LCLP75--40-CDL/ Equivalent in Philips)

S & F in replacement recess mounted 30 Watt LED 1 X 4 flat panel ceiling light with integrated electronic driver, high performance including driver & twin core copper wire for making connection from light to ceiling rose complete all as specified and directed.(Make: Havells cat PLUTONEO4X1PLR30WLED857S / Equivalent in Crompton/Philips/Havells)

S & F in replacement LED recessed 2X2, glare free with integrated electronic driver. uniform illumination ceiling light 36 Watt, color Temp 5700K including driver & twin core copper wire for making connection from light to ceiling rose complete all as specified and directed. (Make: Crompton cat no LCTRN-36-FO-CDL/Equivalent in Havells/C&S)

S & F in replacement LED 18 watt tubelight PC suitable for installation in existing T8 tubelight with G13 lamp holder including making electrical connection complete all as specified and directed. (Make: Crompton Cat Part No LT8-20-865-2/C&S/Havells / Philips)

S & F in replacement concealed LEDdown light fitting 12 watt with integrated electronic driver, recess mounted pressure die cast aluminium luminaire with round profile to fit in ceiling cut out dia 135 mm including twin core copper wire for making connection from light to ceiling rose complete all as specified and directed.( Make: Havells / Equivalent in C&S/Crompton)

S & F in replacement concealed LEDdown light fitting 12 watt with integrated electronic driver,warm white recess mounted pressure die cast aluminium luminaire with round profile to fit in ceiling cut out dia 160 mm including twin core copper wire for making connection from light to ceiling rose complete all as specified and directed. (Make: Havells /Equivalent in Crompton / C&S)

S & F in replacement concealed LED down light fitting 15 watt with integrated electronic driver, surface mounted pressure die cast aluminium luminaire with round profile to fit inceiling cut out dia 180 mm including twin core copper wire for making connection from light to ceiling rose complete all as specified and directed.(Make: Havells /Crompton / C&S)

S & F in replacement LED boliard light fitting energy saving ,envirmental friendly, long life aesthetically designed aluminoum landscpe luminaire for diffused lighting with high power LED as ligh source including fixing on PCC block of size 150mmx150mm x150mm with nuts& bolts and conceting elcetric conntion complete all as specified and directed. (Make: Havells cat part No BAMBOOBL8WLED857SSYMTOPC and equivelent Crompton , C&S)

S & F in replacement surface mounted LED down light fitting 15 watt with integrated electronic driver, mounted pressure die cast aluminium luminaire with round profile to fit on ceiling dia 180 mm including twin core copper wire for making connection from light to ceiling rose complete all as specified and directed. (Make: Havells /Crompton / C&S)

S & F in replacement concealed LED down light fitting 6watt with integrated electronic driver, surface mounted pressure die cast aluminium luminaire with round profile to fit inceiling cut out dia 180 mm including twin core copper wire for making connection from light to ceiling rose complete all as specified and directed. (Make: Havells /Crompton / C&S)

M&L for 1100 Volts grade heavy duty insulated copper stranded conductor served with inner sheathing of PVC tape and over all PVC sheathed passing through pipe or pole of size 1.5 Sqmm two core cable flat or circular including taking down existing complete all as specified and directed.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanised wire 4 mm dia as earthing lead by means of bolts,nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 5of SSR Pt I including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick pre cast RCC ( 1:2:4) type B-1 cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar) including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or earthing test point as directed including proper lugs, including disposal of soil to a distance not exceeding 50 mtr and necessary testing on completion complete all as specified and as directed

Material and Labour for earthing complete with Copper earth plate electrode 600 x 600 x 6 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanised iron strip 25×3 mm as earthing lead by means of bolts,nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Pt I including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick pre cast RCC ( 1:2:4) type B-1 cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar) including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh, copper lugs, complete in all respect, copper strip protected by 40 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or earthing test point as directed including proper lugs, including disposal of soil to a distance not exceeding 50 mtr and necessary testing on completion complete all as specified and as directed

Supply and fixing Copper strip 20 x3 mm in proper position on wall with saddles and fixing screws complete all as specified & directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. 2. Unless otherwise specified the rates for PCC/RCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

Ansh Enterprises

gurchan singh & sons.

Bedi Refrigeration Works

M/s Ram Chander Gupta