Restoration work in Panchtalav Distry (LD-16) and Italiya Distry (LD-18) under the command area of Limbdi Branch Canal for Year 2025-26.

BILL OF QUANTITIES

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional and are

given to provide a common basis for bidding. The basis of payment will be the actual

quantities of work ordered and carried out, as measured by the Contractor and verified

by the Engineer and valued at the rates and prices tendered in the priced Bill of

Quantities, where applicable, and otherwise at such rates and prices as the Engineer

may fix within the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far as it

is otherwise provided under the Contract, include all construction plant, layout,

supervision, materials, erection, maintenance, insurance, profit, taxes and duties,

together with all general risks, liabilities and obligations set out or implied in the

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed to

enter a rate or price shall be deemed to be covered by other rates and prices entered in

the Bill of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included in

the items provided in the priced Bill of Quantities, and where no Items are provided

the cost shall be deemed to be distributed among the rates and prices entered for the

related items of Work.

7. General direction and descriptions of work and materials are not necessarily repeated

or summarized in the Bill of Quantities. References to the relevant sections of the

contract documentation shall be made before entering rates or prices against each item

in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification for canal work Road and Bridge works. For building works

specifications for building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic error pursuant to Clause

29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required

blasting, or the use of metal wedges and sledgehammers, or the use of compressed air

drilling for its removal, and which cannot be extracted by ripping with a tractor of at

least 150 kw with a single rear mounted heavy duty ripper.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr.)

Name of Division: Executive Engineer, S.B.C. Dn. No. 4/1, Limbdi.

Name of work: - Restoration work in Panchtalav Distry (LD-16) and Italiya Distry (LD-18)

under the command area of Limbdi Branch Canal for Year 2025-26.

Description Quantity Unit Rate Amount

Earthwork/Backfilling with selected earth

brought from outside borrow area or from

1 excavated useful material incl. watering 11266 Cum 141.00

ramming compaction with pneumatic temping

and all lead and lift etc. complete.

Excavation in all sort of strata and formations

incl. depositing the unuseful excavated stuff

as and where directed incl sorting and

stacking useful materials as directed up to 30

mt lead etc. complete incl. dewatering. (Depth

0 TO 3.0 mt ) (For all type canal &

foundation trenches of C.D. works) A) IN

OVERBURDEN INCL. HARD MURRUM

Dismantling the existing cement concrete

3 lining including removing the debris etc. 3192.00 Sq.mt 83.65

comp. as and where directed

Providing and Laying in position "Nominal

Mix" Cement Concrete Lining in Bed, Side

Slopes and curvature including batching,

mixing, transporting, placing, vibrating,

smooth finishing, membrane curing (by

curing compound only) & providing bitumen

joints at specified interval including minor

4 filling/depression with murrum / earth / soil 3001.00 Sq.mt 372.43

as per site condition to correct profile,

watering, compaction, trimming etc. to

provide lining.

For 7.5 cms thick cast-in-citu canal lining in

Concrete grade 1:2:4 with Cement level-300

kg & MSA-20 mm (Without Using Paver

Machinaries & without sleepers)

Providing and Laying in position "Nominal

Mix"Cement Concrete Lining in Bed, Side

Slopes and curvature including batching,

mixing, transporting, placing, vibrating,

smooth finishing, membrane curing (by

curing compound only) & providing bitumen

5 joints at specified interval including minor 838.00 Sq.mt 496.57

filling/depression with murrum / earth / soil

as per site condition to correct profile,

watering, compaction, trimming etc. to

provide lining.

For 10 cms thick cast-in-citu canal lining in

Concrete grade 1:2:4 with Cement level-300

kg & MSA-20 mm (Without Using Paver

Machinaries & without sleepers)

Providing, cutting, bending, binding and

fixing in position as per drawing. TMT BAR,

Fe-415 reinforcement for R.C.C. works and

anchor bars incl cost of black annealed 16 to

18 BWG M.S. Wire etc. complete with all

Prov. and Laying in position "Nominal Mix "

cement concrete using cement, sand and

crushed aggregate by mass and machine mix

for R.C.C/CC work including necessary

7 formworks centering scaffolding compaction 299.00 Cum 4303.00

by vibrator, curing as directed with all lead &

lift etc complete Excluding the cost of

reinforcement (For Plinth course & Coping)

A) Concrete grade 1:2:4 and MSA-20mm

Providing, supplying, Lowering, and laying

ISI Standard R.C.C. NP-3 Class pipes in

standard lengths of following Diameter

suitable for either collar joints or rubber ring

joints including all taxes, insurance,

transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to Site, and jointing in proper

position, grade and alignment at all level as

directed by Engineer-in-charge including all

labour, giving hydraulic testing as per ISI

code. (G) 900 mm dia.

Providing & laying dry rubble stone pucca

pitching with panel (of size not more than

10sqmt) of stone masonry 45cm thick wall in

C.M. 1:5, without base , inverted filter and

header stone but with 10 cms thick murrum

layer (for base ) incl hand packing and

trimming and dressing slopes etc. a) 45 cms

thick stone pitching with pointing in C.M. 1:2

Hand broken stone aggregate 40mm size to

63mm size. Including Spreading the stone

aggregate for rolling and W.B.M. including

filling the interstices to required camber and

gradient (excluding spreading of Blindage)(ii)

40mm to 63mm size aggregates (H.B.)

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work at… ....................... %above/below percent(Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………%below Add………%Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item(with Quantity Unit Rate Amount

No brief specification and

reference to book of In In

specifications) figures Words

(A)Total Tendered Amount

(B)Rebate on above tendered amount (if any) % (in figure)

(C)NetTendered Amount(A-B) (in figure) ………………………………

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all P.C.C./R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as

per vernacular office letter no. 04 of 2024, Dt. 20/01/2024 of The Chief Engineer, Quality

Control (SSNNL) as stated in S.O.R. therefore in P.C.C./R.C.C. items where there is a change

as per Nominal mix the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate (i.e. 5448.53 Rs / MT for OPC) in all the