Repair of wall seepage in room No. 45 at Block-A in Zonal Hospital Mandi District Mandi H.P.(SH- Dismantling of floor tile, providing and laying tile work, PVC pipe, painting work etcetera) Deposit work

Dismantling tile work with any thickness in floors and roofs laid in cement mortar including stacking material complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 75mm (seventy five millimetre) diametre single socketed unplasticised Rigid PVC rain water pipes on wall face conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. direction and satisfaction of Engineer-in-Charge. Bend 87.5° (eighty seven point five degree)75mm (seventy five millimetre) bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. direction and satisfaction of Engineer-in-Charge. 75mm (seventy five millimetre) coupler

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. direction and satisfaction of Engineer-in-Charge. Single Tee without door 75x75x75mm (seventy five into seventy five into seventy five millimetre)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimetre) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), Jointing with grey cement slurry @ (at the rate of) 3.3 kg/sqm (three point three kilogram per squaremetre) including pointing the joints with white cement and matching pigment etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Distempering one or more coats on old work with oil bound washable distemper of approved brand and manufacture to give an even shade complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Painting wood work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.75 ltr/10 sqm (at the rate of zero point seven five litre per ten square metre) of approved brand and manufacture including carriage of material in all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge.

Providing and fixing 18mm (eighteen millimetre) thick high density HDMR both side prelaminated board in Shutter/shelves/cup board with butt joints and fixing with nails and screws etecetera complete with all accessories including carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etcetera complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1 mm (one millimetre) , of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10(ten) litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etcetera including making connection with the existing P/S trap, including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.