Laying of delivery pipe line from 0m to 500m of LIS Chadayanpara in Vilayur Panchayath

Amount

scheme-1 DELIVERY PIPE WORK

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

od68030/2019_2020/IA : Supply and laying of UPVC of class 2 to class 6 and specials , lowering to the trenches already made, placing in postion aligning the pipe line to the lines and levels and jointing the pipes and specials with solvant cement testing the pipe line with water to the required test pressure. 140mm nominal outer dia pipes

2.13.1.2 : Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth up to 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth. including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80m dia but not exceeding 300 mm dia

od68031/2019_2020/IA : Providing and laying GI Pipes 150 mm dia 4.8mm thickness including material and conveyance as per the direction of departmental officers at site

od68032/2019_2020/IA : MS Flanges for 150mm pipe - Manufacturing supplying and fitting 150mm dia MS Flange having shell thickness 10mm with 75mm depth suitable bolt ,holes,fixing the flange in position with required welding around the flange,pipe joint grinding for smoothing the welded portion,including painting with red oxide primer etc. complete as directed by departments officers.

15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

10.5.1 : Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces

14.43 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od5874/2020_2021/IA : Engaging Electrician for attending electrical works in the pump house after overhauling the motor and pump

od68033/2019_2020/IA : Supplying wire man for assisting Electrician while dismantling motor ,pump,pipe,starter for the construction work and making small repair and refitting the same after completion

od68034/2019_2020/IA : Supplying Cooli/Khalasi to assist wire man,fitter,for dismantling motor ,pump pipe, starter for the construction work and making small repair and refitting the same after completion

18.31.1.1 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):100 mm diameterClass I

od5876/2020_2021/IA : Supply of CI Non Return Valve, Conforming to IS 5312 Part I - 1984, PN 1.6, Size 100mm. KWA observed data 100.98.429

od5877/2020_2021/IA : Providing and fixing G.I. pipes 100 mm dia 4.50mm thickness all cost , conveyance and labour charge etc complete

od6022/2020_2021/IA : MS Flanges for 100mm pipe - Manufacturing supplying and fitting 100mm dia MS Flange having shell thickness 10mm with 75mm depth suitable bolt ,holes,fixing the flange in position with required welding around the flange,pipe joint grinding for smoothing the welded portion,including painting with red oxide primer etc. complete as directed by departments officers.

od6049/2020_2021/IA : Providing and fixing G.I. pipes 125 mm dia 4.50mm thickness all cost , conveyance and labour charge etc complete

od6051/2020_2021/IA : MS Flanges for 125mm pipe - Manufacturing supplying and fitting 125mm dia MS Flange having shell thickness 10mm with 75mm depth suitable bolt ,holes,fixing the flange in position with required welding around the flange,pipe joint grinding for smoothing the welded portion,including painting with red oxide primer etc. complete as directed by departments officers.

od6008/2020_2021/IA : Providing and fixing Name board of size 60x45 cm using 1mm thick MS sheet and 25x25x5 mm angle section and fixing in 240 cm (210 cm above GL and 30 cm below GL) overall height (25x25x5 mm angle sction ) post including fixing in 20x20x30 cm concrete below ground level.

ANWAR CONSTRUCTION

Bidder Name

unnikrishnan-m

ANWAR CONSTRUCTION