Restoration of HR Structure of Anand Distributary Ex.Borsad Branch.

Bill of Quantities

Restoration of HR Structure of Anand Distributary Ex.Borsad Branch.

Item No. Description Qty Rate In figure unit Amount in Rs.

Dismantling the existing brick masonry Rs. Seven

including sorting out and stacking the useful Hundred

1 material and removing the debries and making 53.60 750.90 Fifty & Cum

good the damages etc. complete as directed. In Ninety Paise

Dismantalling the C.C. lining including Rs. Eighty

2 including disposing off the dismentalled 209.40 86.50 Six & Fifty Sqmt

materials as directed etc. complete.-7.50 cm thick Paise Only

Dismantling the existing R.C.C. Pipes including Rs. One

sorting out and stacking of the useful materials

3 of the following diameters including refilling the 20.00 1270.70 Meter

trenches etc. complete as directed. NP_2 pipes (d) Seventy Paise

1000 mm. to 1200 mm. Only

Excavation for foundation in all sorts of soil

including yellow sandy gravelly soils ,soft & hard

murrum etc. in dry condition including

4 depositing the excavated stuff in uniform layers 193.70 102.40 Cum

in banks or as and where directed etc. complete Paise Only

for lead upto 500 m and all lift. (BY

MACHINERY)- Excluding dewatering.

Providing & Laying in position "NOMINAL MIX"

cement concrete using cement, sand and

crushed aggregate by mass and machine mix for

C.C./R.C.C work incl. necessary formworks

centering, scaffolding, compaction by vibrator,

curing as directed with all lead & lift etc complete

Without Dewatering and excluding cost of steel

(A) For Foundation concrete / General purpose

(c) C. C. Nominal Mix, M-15 and MSA-20 mm 30.70 3935.00 Cum

(f) C. C. Nominal Mix, M-20 and MSA-20 mm 118.70 4296.00 Two Hundred Cum

Providing & Placing in position reinforcement

bars including cutting, bending, welding joints

where necessary, hooking etc. complete as per

drawing for all lead and lifts.

Back filling the foundation trenches around the

structures etc with selected excavated stuff

7 113.10 36.90 & Ninety Cum

including watering, ramming, compacting etc. Paise Only

complete. (By Machinery)

Providing and fixing in position ( different

diameter ) NP2 R.C.C. pipe with collar including

filling and caulking the joints with cement

mortar 1:1 proportion, finishing to design grade

and level curing etc. complete for all leads and

NP-2 class 1200 mm dia pipe. 25.00 3091.10 Ninety One & Meter

Over hauling and oiling greasing of CR/HR gates

of branch/distributory/minor etc comp as Rs. One

directed.(d)New/ Reparing of steel gate including

9 1490.00 127.20 Twenty Seven Kg.

providing basic steel material; M.S. Shaft plate, & Twenty

angles, channels etc. incl. fabriction transporting Paise Only

to site & Erection and painting etc. complete.

Providing and fixing the iron rod for steel gates Seven

10 including providing big size thread and finishing 5.00 1740.80 Hundred Meter

as required etc comp. b- dia of bar 50 mm rod. Forty &

Providing and fixing heavy duty CI nut for steel Thousand

gates as directed etc comp b- for 50mm and

11 2.00 2795.40 Hundred No.

mm dia rod land height of nut is 160 x 160 x 120 Ninety Five &

cutting Forty Paise

Providing and fixing heavy duty thrust bearing

for following dia as directed etc comp a- for

12 2.00 800.00 Hundred No.

mm dia and 50 mm dia bar and ID/OD 65mm to Only

Providing and laying plain / reinforced cement

concrete lining of Nominal Mix, M-15, (MSA-20

mm) in bed, side slopes and curvature, Rs. Three

including mixing, transporting, placing, Hundred

13 vibrating, smooth finishing, curing, including 155.00 369.50 Sixty Nine & Sqmt

dewatering where required. Fifty Paise

(MANUALLY WITH CONVENTIONAL MIXER )

(A)7.5 cm thick lining in bed/slope - with water

Total Amount Rs.

Total Amount Rs.

Rs. Twelve Lac Nine Thousand Nine Hundred Seventy Two & Fifty Seven Paise Only

I/We am/are willing to carry out the work at……………………………. % above/ below percent (Should be written in figures and words) of the

estimated rate mentioned above. Amount of my/our tender works out as under.

Estimated amount Put to tender Estimated amount Put to tender

Deduct …………………….% Below Add ……………. % above

In Words In Words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC 10/2017 Cement

Consumption /16/CDate:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of contractor.

Deputy Executive Engineer Divisional Accountant

Anand Irrigation Sub Division Anand Irrigation Division

Price Adjustment

Name of Work Restoration of HR Structure of Anand Distributary Ex.Borsad Branch.

Brake up of Rate Brack Up Amount

Qty Estimated Without

Item of work but may be GST Rate Unit Amount (Rs.) Plant & Plant & Net Amount

more or less (Rs.) Labour Cement Steel Bitumen POL Machinery Labour Cement Steel Bitumen POL Machinery Other Material

Dismantling the existing brick

masonry including sorting out

and stacking the useful

debries and making good the

damages etc. complete as

directed. In Cement Mortar

Dismantalling the C.C. lining

including including disposing

as directed etc. complete.-7.50

Dismantling the existing

R.C.C. Pipes including sorting

out and stacking of the useful

materials of the following

diameters including refilling

the trenches etc. complete as

directed. NP_2 pipes (d)

Excavation for foundation in

all sorts of soil including yellow

sandy gravelly soils ,soft &

hard murrum etc. in dry

condition including depositing

layers in banks or as and

where directed etc. complete

for lead upto 500 m and all lift.

(BY MACHINERY)-

Excluding dewatering.

Providing & Laying in position

"NOMINAL MIX" cement

concrete using cement, sand

and crushed aggregate by

mass and machine mix for

C.C./R.C.C work incl.

necessary formworks

centering, scaffolding,

compaction by vibrator, curing

as directed with all lead & lift

etc complete Without

Dewatering and excluding cost

of steel reinforcement.

(A) For Foundation concrete /

General purpose

(c) C. C. Nominal Mix, M-15

(f) C. C. Nominal Mix, M-20

Providing & Placing in position

reinforcement bars including

cutting, bending, welding

joints where necessary,

hooking etc. complete as per

drawing for all lead and lifts.

Back filling the foundation

trenches around the structures

etc with selected excavated

stuff including watering,

ramming, compacting etc.

complete. (By Machinery)

Price Adjustment

Name of Work Restoration of HR Structure of Anand Distributary Ex.Borsad Branch.

Brake up of Rate Brack Up Amount

Qty Estimated Without

Item of work but may be GST Rate Unit Amount (Rs.) Plant & Plant & Net Amount

more or less (Rs.) Labour Cement Steel Bitumen POL Machinery Labour Cement Steel Bitumen POL Machinery Other Material

Providing and fixing in position

( different diameter ) NP2

R.C.C. pipe with collar

including filling and caulking

8 the joints with cement mortar

1:1 proportion, finishing to

design grade and level curing

etc. complete for all leads and

Over hauling and oiling

greasing of CR/HR gates of

branch/distributory/minor etc

comp as directed.(d)New/

Reparing of steel gate

material; M.S. Shaft plate,

angles, channels etc. incl.

fabriction transporting to site

& Erection and painting etc.

Providing and fixing the iron

rod for steel gates including

finishing as required etc comp.

b- dia of bar 50 mm rod.

Providing and fixing heavy

duty CI nut for steel gates as

directed etc comp b- for 50mm

and 63 mm dia rod land height

of nut is 160 x 160 x

Providing and fixing heavy

duty thrust bearing for

following dia as directed etc

comp a- for 38 mm dia and

mm dia bar and ID/OD 65mm

Providing and laying plain /

reinforced cement concrete

lining of Nominal Mix, M-15,

(MSA-20 mm) in bed, side

slopes and curvature,

including mixing,

transporting, placing,

vibrating, smooth finishing,

curing, including dewatering

where required.

CONVENTIONAL MIXER )

(A)7.5 cm thick lining in

bed/slope - with water curing.

Deputy Executive Engineer Executive Engineer

Anand Irrigation Sub Division Anand Irrigation Division

Cement Requirement Statement

Restoration of HR Structure of Anand Distributary Ex.Borsad Branch.

Description of Item Qty. Unit ption in

No. No. requirement

Providing & Laying in position "NOMINAL MIX" cement concrete using cement, sand and crushed

aggregate by mass and machine mix for C.C./R.C.C work incl. necessary formworks centering,

scaffolding, compaction by vibrator, curing as directed with all lead & lift etc complete Without

Dewatering and excluding cost of steel reinforcement. (A) For Foundation concrete / General

purpose(a) C. C. Nominal Mix, M-15 and MSA-40 mm

Providing & Laying in position "NOMINAL MIX" cement concrete using cement, sand and crushed

aggregate by mass and machine mix for C.C./R.C.C work incl. necessary formworks centering,

2 5(A)(f) scaffolding, compaction by vibrator, curing as directed with all lead & lift etc complete Without 118.70 m3 7.20

Dewatering and excluding cost of steel reinforcement. (A) For Foundation concrete / General

purpose(f) C. C. Nominal Mix, M-20 and MSA-20 mm

Providing and fixing in position ( different diameter ) NP2 R.C.C. pipe with collar including filling and

caulking the joints with cement mortar 1:1 proportion, finishing to design grade and level curing etc.

3 8 complete for all leads and lifts. 25.00 m3 0.20

NP-2 class 1200 mm dia pipe.

Providing and laying plain / reinforced cement concrete lining of Nominal Mix, M-15, (MSA-20 mm) in

bed, side slopes and curvature, including mixing, transporting, placing, vibrating, smooth finishing,

curing, including dewatering where required.

(MANUALLY WITH CONVENTIONAL MIXER )

(A)7.5 cm thick lining in bed/slope - with water curing.

Deputy Exectutive Engineer Exectutive Engineer

Anand Irrigation Sub Division Anand Irrigation Division

Steel Requirement Statement

Name of Work :- Restoration of HR Structure of Anand Distributary Ex.Borsad Branch.

Sr No. Item No. Description of Item Qty. Unit

Providing & Placing in position reinforcement bars including cutting, bending,

welding joints where necessary, hooking etc. complete as per drawing for all lead

1 4 and lifts. (A) TMT / CRS (FE 500 D) 1.60 MT

Total 1.6030 MT

Deputy Exectutive Engineer Exectutive Engineer

Anand Irrigation Sub Division Anand Irrigation Division