ADDITION ALTERATION TO BLDG NO E 5 P-129 C 15 P-132 AT DRDO RESIDENTIAL COMPLEX VIGYAN UNDER GE I R N D DEHRADUN

Amount

Taking down existing cement or cement lime plaster/Grit wash of any description and in any position or brick or concrete surfaces etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick of external surfaces in two layers first layer 10 mm thick in cement mortar 1:6 and second layer 5 mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid for separately as supply only under relevant item of this BoQ.

M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot Tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied and 0.90 litre/10sqm over new surfaces external surfaces of wall complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work finished even and smooth without using extra cement, complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete unreinforced complete all as specified and directed.

M&L for providing RCC 1:2:4 type B1 using 20 mm graded stone aggregate slabs supported on walls beams and columns in floors roofs landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and directed.

M & L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for rendering 5 mm thick on brick work or concrete surfaces in cement mortar 1:3 on ceiling surface finished fair and even complete all as specified and directed.

M&L for preparing of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistance primer over 3 mm thick wall care putty in two layer on plastered surfaces complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion, over a coat of alkali resistance primer white or tinted on new ceiling surfaces over a coat of 3 mm thick wall care putty, complete all as specified and directed.

M&L for applying two coats of Distemper oil emulsion, white or tinted on old ceiling surfaces after complete removal of existing treatment over a coat of primer over coat of 3 mm thick wall care putty including preparation of surfaces complete all as specified and directed.

M&L for French polishing on surfaces of any description, over 10 cm width or girth including cleaning & preparing the surfaces including a coat of wood filler on old works with one or more coats complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10 cm width or girth including preparation of old painted surfaces complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10 cm width or girth including preparation of old painted surfaces complete all as specified and directed.

M&L for applying two coat of distemper oil emulsion white or tinted on old decorated of undecorated wall surfaces over a coat of 3 mm thick in two layer wall care putty after complete removal of existing treatment including preparation of surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling / stone including cement mortar bedding ( but not backing ) or of any description, removing serviceable tiles to store and rubbish off the premises as specified and directed.

M&L for light shade, double charged Vitrified Ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match on and including a bedding layer of screed bed 15 mm thick in cement mortar 1:6 as specified etc all as specified and directed.

All as per item no 18 here in before, but in skirting over and including 10 mm thick back coat in cement mortar 1:4 complete all as specified and directed.

M&L for non Skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

All as per item no. 20 here in before but on vertical surfaces such as dado, skirting etc including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x250x7 mm / 450x350x7 mm thick set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for 16 to 18 mm thick polished Granite stone slab single piece as in kitchen cooking platform, window cill, steps and similar work incl necessary bull nosing as required machine cut, rounding edges and polishing, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed. Note: Necessary hole for gas pipe to be provided as per location decided at the time of laying the granite.

Taking down Chowkats or frame with shutter (without taking off shutters from the frame) not exc. 1.5 sqm each complete all as specified and directed.

Taking down Chowkats or frame with shutter ( without taking off shutters from the frame) exc. 1.5 sqm but exc 4.0 sqm each complete all as specified and directed.

Providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3 mm (±0.2 mm). Window profile with hollow section with multi chamber. Frame (88 mm x 52 mm), sliding sash (42 mm x 67mm). Sliding mesh sash ( 42 mm x 57 mm) sliding interlock (one vertical length in each shutters) (45.5mm X 28mm), Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket, 1.2 ± 0.2mm thick galvanized steel Frame (30mm x18 mm) 2 nos, sliding sash (30 mm x18 mm), sliding mesh sash (26 mm x 10 mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, Hardware (Touch Lock of zinc alloyed (white powder coated)), steel roller system. Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories. Area n.exc. 2 sqm and all fittings and fixture complete all as specified and directed. Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured lor payment purpose.

S&F Sheet glass 4.8 mm thick, ordinary quality and glazing with rubber beading putty in square area exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F Framed work such as grills, gratings, etc with ends of bars shouldered and / or riveted, or forged into spikes: framed guard bars barred iron doors: ladders: framed balusters: walkways: railings: framework of water tanks and similar work con-forming to Fe. 290 Gde-E-165 complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10 cm width or girth including preparation of new surfaces & applying one coat of red oxide, zinc chrome complete all as specified and directed.

S&F 40 mm thick Flush shutter, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Factory made Solid PVC Moulded Door Shutter with particle board core 28 to 30 mm thick ( stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed.

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforcement with MS square tube, in opening as per specification & drawings complete all as specified and directed.

S&F factory made wire gauzed PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail: panel will be of wire gauze. The wire gauze shall be wrapped on an additional square 8 mm M.S Solid tube & this tube shall be welded to M.S Tubes. The wire gauge shall be stretched to tighten firmly to be fitted in M.S Frame welded /Sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specifications & drawing complete all as specified and directed.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

S&F for Aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F Floor door stopper double leg of 140 mm overall length aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 100 mm long mild steel butt hinges, medium weight cold rolled including welding if required complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 125 mm size aluminium handles, cast type anodized D type complete all as specified and directed.

S&F 300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate including welding if required complete all as specified and directed.

S&F in 18 to 19 mm thick solid factory made PVC board for cupboard/ cabinet shutters with one or both side laminated printed PVC celluka board, anti termite and anti moisture proof etc. sheet fixed with & including suitable PVC frame and Magnetic door catcher as per specification & drawing complete all as specified and directed.

S&F 35 mm dia brass knobs for cupboard fixed with nut and screw and washer of mild steel, bright finished complete all as specified and directed

S&F continuous (piano) hinges mild steel, bright finish or electro galvanized with width of flap (when open) 30 mm complete all as specified and directed.

S& F 126 mm long hasp & staple safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Taking down rain water pipes ( any size or pattern ) including all fittings, heads, shoes, bends, swan peck etc complete all as specified and directed

S&F 150 mm dia PVC (SWR) or rain water, single socketed pipes fixed to walls complete all as specified and directed.

S&F 110 mm dia PVC (SWR) or rain water, pipes fixed to walls complete all as specified and directed

S&F 75mm bore PVC (SWR) or rain water, dia of pipes 75mm fixed to walls complete all as specified and directed

S&F PVC (SWR) bends/shoes, 150mm bore dia fitted with access door.

S&F PVC (SWR) bends/shoes, 110 mm bore dia fitted with access door complete all as specified and directed.

S&F PVC (SWR) bends/shoes, 75 mm bore dia fitted with access door complete all as specified and directed.

S&F PVC(SWR) Tee reducer 150/100/75 mm complete all as specified and directed.

S&F PVC (SWR), Junction single, (Single T) equal or unequal 75 mm dia fitted with access door complete all as specified and directed.

S&F PVC (SWR), Junction single, (Single T) equal or unequal 110mm dia fitted with access door complete all as specified and directed.

S&F PVC (SWR) Grating doom of size 150mm minimum weight 100gm complete all as specified and directed.

Talking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re fixing complete all as specified and directed

Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for re fixing complete all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar(1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc: and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth in brick wall complete all as specified and directed.

S&F, laying and testing for 15 mm bore GI tubing medium grade, including all fittings such as union, reducer, sockets, reducing bends elbows tee, check nuts, caps, plugs etc fitted to wall and ceiling or laid in floors complete all as specified and directed.

S&F, laying and testing 20 mm bore GI tubing medium grade, including all fittings such as union, reducer, sockets, reducing bends elbows tee check nuts, caps, plugs etc fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F, laying and testing 25 mm bore GI tubing medium grade, including all fittings such as union, reducer, sockets, reducing bends elbows tee check nuts, caps, plugs etc fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F, laying and testing 32 mm bore GI tubing medium grade galvanized steel including all fittings such as union, reducer, sockets, reducing bends elbows tee check nuts, caps, plugs etc fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed.

S&F vitreous china wash down water closet ( Pedestal pattern) white including fixing bolt, plastic water closet seat cover black / white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs complete all as specified and directed.

S&F in repairs vitreous china, white, wash hand basin, flat back size 550x400 mm including MS brackets including cutting for and pinning in, including waste pipe compete all as specified and directed.

S& F 15 MM dia CP brass central hole wash hand basin mixer without pop up waste system but with 450 mm SS flexible hose screwed down high pressure screwed for iron pipe completed all as specified and as directed.

S&F in repairs chromium plated brass wall mixer 3 in-1 fancy type with provision for both hand shower and overhead shower complete with wall flange ( without hand & over head shower screwed down for 15 mm GI bore pipe complete all as specified and directed.

S&F 15 mm dia brass CP wall mixer provision for over head shower with 115 mm long bend pipe & wall flange for mixing hot & cold water screwed down for iron pipe and fixed to wall complete all as specified and directed.

S&F in repairs 20 mm dia brass chromium plated tubular towel rails, D type, 60 cm long between flanges, complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs soap dish vitreous china white approximate size 160x 160 x 90mm type fixed with screw to wall complete all as specified and directed.

S&F in repairs chromium plated health faucet with 1.5m CP tube & hook with brass nuts all complete all as specified and directed.

S&F in repairs brass jet spray with chromium plated pipe fixed one end to EWC and other end screwed down with CP angle valve 15 mm bore complete all as specified and directed.

S&F in repairs 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs 25 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs 15 mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs Grating 100 mm dia of CP with or without hole minimum weight 25g compete all as specified and directed

S&F in repairs 15 mm dia bib tap cast copper alloy ( fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs stop valves 15 mm bore, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs 15 mm dia stop valve chromium plated concealed fancy type with long shank and cup complete all as specified and directed.

S&F in repairs 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered HOT or Cold with long screwed shanks and fly nut, capstan head, screwed for 15 mm dia pipe complete all as specified and directed

S&F in repairs toilet paper holder, chromium plated fixed to walls with CP brass screws complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket guard & railing 60 cm long complete all as specified and directed

S&F in repairs brass CP bottle traps for WHB with inlet and outlet screwed for pipe or connections including necessary packing union and cap fixed for 32 mm bore complete all as specified and directed.

S&F in repairs sinks with drainage board made of stain less steel 1 mm thick kitchen or laboratory with all plugs, washers, fittings and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mmx460mm bowl size 410 mm x 330mm 160mm, complete all as specified and directed.

S&F in repairs stainless steel utensil plate rack size 600 mm x 600mm x 250 mm) using 0.8 mm thick sheet complete all as specified and as directed.

S&F in repairs Harrison rails 20 mm dia, anodised aluminium alloy, chromium plated with fixing brackets stops, roller etc complete all as specified and directed

M&L for roughening surfaces of old concrete floor / terrace by picking including taking down existing deteriorated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc and removing the scraped materials debris to a distance not exc. 1000 m complete all as specified and directed

M&L for 10 mm thick screed bed or bedding layer in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L for providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing membrane comprising of the following for accessible roof complete all as specified and directed. (i) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/sqm on top of dry surface of finished cement mortar plaster. (ii) One layer of APP based polymeric membrane minimum weighing 3 kg / sqm & minimum 3 mm thickness reinforced with polyester non woven fabric ( wt not less than 150 gms/sqm ) land on primed surface by forced application complete all as specified with overlap of 100 mm and the overlap shall be sealed by flame. (iii) M&L for cement concrete tiles 20cmx20cmx20mm thick machine pressed, set jointed and pointed in neat cement slurry in roof over and including 15mm thick cement screed bed in CM 1:4 with water proofing compound, complete all as specified and directed. Note:-(i) The work of water proofing treatment shall be got executed through expert agency of manufacturers or authorized applicator of manufacturer. (ii)Water proofing compound shall be measured and paid separately.

M&L for cement concrete in roof kerbs mud stops or coving ( rounded or chamfered on edges as directed ) type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (20 mm graded aggregate) as in sub base for laying floor finishes complete all as specified and directed.

Taking down the shutter of any description exc 1 sqm but n. exc 2 sqm each

Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendant, regulators, sockets light fitting etc.and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

S&F LED universal batten fitting suitable for single T8 LED lamps (16W) complete all as specified and directed

S&F LED tube light 16 Watt T8 double sided connection with built-in driver, THD not more than 10% all as specified and directed

S&F LED mirror light fittings, 10 Watts, 1000 lumens 6500K comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, IP 20 protection and all accessories prewired including connecting to mains complete all as specified and directed

Supplying & fixing, testing of surface mounted in built, LED 18 Watts, 1x1 LED ceiling light fitting with slim line extruded aluminium / CRCA body, opel acrylic diffuser, electronic driver etc and all accessories pre-wired including connection to source complete all as specified and directed

Supply, fixing and testing in 15 Watt LED roadway street light made up of pressure die cast aluminium housing complete with polycarbonate cover with high impact resistance 15 W, ingress protection of IP 66, PF-0.9 & with input resistance, i.e IK 07 surge protection upto 4 Kv , compiled with IS 10322 CCT is greater than 5000K complete with all accessories duly pre-wired, including supply and fixing the bracket of 40 mm dia 1.5 m GI pipe light grade, bent to shape including MS FI clamps of 20/25x3 mm, nut and bolt and connected with flexible cable 3 core copper conductor 0.50sqm up to ceiling rose, mounting on existing MS frame bracket including connecting the fitting complete all as specified and directed

S&F LED Decorative, Wall mounting champagne gold finish fixture with plastic body suitable for 9 W LED lamp B 22 base complete all as specified and directed Charge.

M&L for point wiring with two single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm( Nominal area drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20 mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm ( Nominal area) and connected to main earth dolly complete all as specified and directed for One light/fan point controlled by one switch

Description complete all as per item no 104 here in before but for one socket outlet 6 amp controlled by one switch on the same board with other switches.

Description complete all as per item no 104 here in before but for one socket outlet 6 amp controlled by one switch on independent board.

Description complete all as per item no 104 here in before but for one light point controlled by two way switches 6 Amp complete all as specified and directed.

Description complete all as per item no 104 here in before but for one bell point controlled by one bell push complete all as specified and directed.

Description complete all as per item no 104 here in before but for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sqmm (Nominal area) cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete all as specified and directed.

Description complete all as per item no 104 here in before but for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4 Sqmm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4 Sq mm (Nominal area) cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete all as specified and directed.

Note for item 104 to 110 here in before: (i) The quoted rates shall be deemed to be inclusive for cutting chases in brick walls /pillars etc. for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface . The portion of point wiring at RCC columns /Beams/Ceilings shall be in surface conduit of suitable size fixed on surface with using PVC rawl plugs. (ii) Rate for modular metal flush boxes, inner and outer plate with frames are deemed to be included in the quoted rate by contractor for above items. (iii) Fittings like Modular switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule "A". (iv) The size of conduits shall be determined on permissible No of runs of wires as specified in SSR Part-I (2009) clause 19.125 (B), However, minimum size of conduit shall be 20 mm dia medium grade.

S&F Modular switch piano flush button single pole one way 6 amp complete all as specified and directed.

S&F Modular switch piano flush button single pole one way 16 amp complete all as specified and directed.

S&F Modular switch flush type 6amp, single pole, two way complete all as specified and directed.

S&F Modular socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed.

S&F Modular Socket outlet 2 in 1, 2 &3 pin , 6 amp, flush type ccomplete all as specified and directed.

S&F ceiling rose 3 terminal polycarbonate body complete all as specified and directed.

S&F stepped type electronic fan regulator flush type modular 120 watt 2 module, including connecting up complete all as specified and directed

S&F door bell, AC, 240 Volts, single pole complete all as specified and directed.

S&F Modular bell push, 6 amp 240 volts complete all as specified and directed.

S&F angle holder, insulated polycarbonate body with back plate complete all as specified

S&F LED Bulb 9 Watt B-22 Base Type suitable for mounting in Wall mounting decorative fittings and batten holders complete all as specified and directed

M&L for submain wiring along with earth continuity conductor with PVC insulated FR multi stranded copper conductor cable ( Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories for nominal sizes of 2x6 Sqmm + 1x6 Sqmm earth wire in conduit of suitable size complete all as specified and directed.

Description complete all as per item no 123 here in before but for 4x6 Sqmm +1x6 Sqmm earth wire in conduit of suitable size complete all as specified and directed.

S&F MCB distribution board powder coated, CRCA steel sheet constructed as per IS 8623, degree of protection IP 43-IK 09 with metal double door , recess mounted, having insulated 100amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required for SPN, 240 volts, 4 ways complete all as specified and directed.

Description complete all as per item no 125 here in before but for SPN 240 Volts, 8 Ways complete all as specified and directed.

S&F TPN DB double Door 415 V 8 way of module ( 8+24) with IP 43 Protection, isolated neutral bar, insulated 200 Amps rated bus bar assembly, cement spill protector, door earthing, earth bar, din bar, mechanical impact strength IK 08, recess mounted and connecting the wiring with isolator TPN and MCBs and all accessories complete all as specified and directed

S&F MCB TPN C Curve 63 Amp suitable for fixing in TPN DB 415 V 8 way complete all as specified and directed

S&F SPN DB-Double Door 240V 14 way with IP 43 protection, isolated neutral bar, insulated bus bar assembly, cement spill protector, door earthing, earth bar, din bar, mechanical impact strength IK 08, recess mounted and connecting the wiring with MCB SPN and MCBs and all accessories complete all as specified and directed

S&F MCB SP 240 V C curve suitable for fixing in DB of capacity 6 to 32 Amps 10KA complete, all as specified

S&F MCB SPN 240 V C Curve suitable for fixing in MCB DB of capacity 63 Amps 10 KA complete all as specified

S&F MCB SPN 240 V C Curve Suitable for fixing in MCB DB of capacity 40 amps 10 KA complete all as specified.

Supply, install, testing and commissioning of factory made LT panel wall mounted board CPRI approved made out of Thermo plastic Poly carbonate indoor type double door totally enclosed weather, dust and vermin proof with front opening hinged /screwed door locking arrangement 415 volt 3 phase 4 wires AC 50 Hz having aluminium bus bar 500 Amps, breaking capacity 35 KA, IP-54 protection for phases and line neutral insulated with PVC sleeves, suitable chamber for fixing three phase electric meter 10-60 Amps-07 Nos complete, with suitable size angle brackets, hold fast, fastener bolts, copper lugs, spacers, mounting channels, rubber gasket, locking knobs, hylam sheet pieces, PVC shrinkable sleeves, nuts & bolts, washers etc, suitable single core copper wire connections, refixing of old electric meter, suitable compartments and epoxy powder spray paint with primer on iron body parts complete all as specified and directed including the following: INCOMING (a) MCCB 415 Volts 4 pole 16 KA breaking capcity of 125 Amps-01 No (b) R-Y -B phase LED incating lamps-03 Nos OUTGOING (a) MCB SPN 63 Amps 10 KA -05 Nos (b) Mounting three phase energy metters-05 nos (c) Copper flexible wires & open terminals for all feeders

Supply , install, testing commissioning of factory made LT panel wall mounted board CPRI approved made out of Thermo Plastic Poly carbonate indoor type double door totally enclosed weather , dust and vermin proof with front opening hinged/screwed door locking arrangement 415 volt 3 phase, 4 wires AC 50 Hz having aluminium 500 Amps, breaking capacity 35 KA, IP-54 protection for phases and the neutral insulated with PVC sleeves, suitable chamber for fixing single phase electric meter 10-60 Amp -11 Nos complete, with suitable size angle brackets, hold fast, fastener bolts, copper lugs, spacers, mounting channels, rubber gasket, locking knobs, hylam sheet pieces, PVC shrinkable sleeves, nuts & bolts, washers etc, suitable single core copper wire connection, suitable compartments and epoxy powder spray paint with primer on iron body parts complete all as specified and directed including the following:- INCOMING (a) MCCB 415 Volts 4 pole 16 KA breaking capacity of 125 Amps-01 No (b) R-Y -B phase LED indicating lamps-03 Nos OUTGOING (a) MCB SPN 63 Amps 10 KA -11 Nos (b) Mounting single phase energy meters-11 nos (c) Copper flexible wires & open terminals for all feeders.

Supply and fix single pole & earth enclosure with a two pin and earth plug and socket complete with one single pole MCB 20/32 Amps 10KA complete all as specified and directed.

Supply and fix exhaust fans made up of sturdy engineering plastic body AC single phase 230/240 V of size 300 mm sweep with louver and with all accessories, including making circular holes suitable for mounting the exhaust fans and making good the disturbed surfaces with PCC complete all as specified and directed.

Supply and fix exhaust fans made up of sturdy engineering plastic body AC single phase 230/240 V of size 250 mm sweep with louver and with all accessories, including making circular holes suitable for mounting the exhaust fans and making good the disturbed surfaces with PCC complete all as specified and directed.

Note: (i)The work will be carried out upto 6th storey bldgs hence necessary safety precautions complete scaffolding and other arrangement will be managed by tenderer/bidder accordingly. (ii) Tenderer kind attention is also invited to srl clause 1.16 of Sec-I on srl page No 6 (General rules for Safety in Construction) as specified in SSR Pt-I (2009) for safety measures/precautions. (iii) Steel scaffolfing is to be used in the work.

M/S SHANTI SARUP DINESH CHAND

SANJEEV CONSTRUCTIONS

M/s Himgiri construction

Som Prakash Gupta

OM TRADERS