REVITALISATION OF PEROORKADA FACTORY, TRIVANDRUM (PFT)

CIVIL WORKS

Administration Block - Elevation Beautification

ELECTRICAL WORKS

Electrical Works - Renovation works

BUILDING SIGNAGES

DSR code

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Providing and laying terracotta jalli works with 60 mm thick in super structure above plinth level up to floor V level with necessary vertical and horizontal ms frame support at an interval of 2 mtr with approved jalli laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of MS frame work shall be made for seperately) Size of jaali 200x200x60mm Make: Nuvocotto (Base rate of jaali - Rs.150/- per nos.)

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainlesssteel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proofsilicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall included).Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Three panel Casement window having top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainlesssteel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proofsilicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall included).Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Casement window having top completely fixed ventilator with single panel cum fixed panel with S.S. friction hinges (400 x 19 x 1.9 mm)made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.)

Providing and fixing glazing in aluminium/Upvc door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge

Providing and fixing 12 mm thick frameless toughened glass door shutter and fixed glass partition of approved brand and manufacture including patch fittings, and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in-charge (Door handle, lock and heavy duty floor spring etc.to be paid separately)

Supply of stainless steel handle for toughened glass door, H- type of size 450 mm and 25 mm dia with satin finish of reputed make Make: Dorma/ Hormann (Base rate - Rs. 4800/pair)

Supply of SS corner lock for toughened glass door of 12mm thick with weight up to 200 kg. Make: Dorma/ Hormann (Base rate - Rs. 3300/no)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 200 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-inˇcharge. Heavy Duty Floor spring with door opening width upto 1200mm. Make: Dorma/ Hormann (Base rate - Rs. 10000/no)

Providing and applying exterior paint system on fiber cement board façade, comprising one coat of alkali-resistant acrylic exterior primer followed by two coats of premium 100% acrylic weatherproof exterior emulsion paint, including surface preparation, filling of joints with approved jointing compound and fiberglass mesh tape, scaffolding, tools, labour, and all incidental works, complete as per the manufacturer's specifications. (Base rate of paint - Rs. 413/kg)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Providing &fixing UV Stabilized Poly carbonate compact sheet 4mm thick crystal sheet with UV protection treatment weight not less than 4800 GM/SQM. Light transmission of 90%.The masking carrying instruction as to which side UV protected the same side should be installed facing out wards. Fire retardant confirming to IS 1443- 1987,Aluminium 50mm thick leak proof fixing management system, confirming IS 733-1987 alloy 606376 EPDM rubber gaskets, Silicone sealent, cold forged fasteners to be used for fixing the polycarbonate sheeting. EPDM rubber gaskets shall be as per ASTM - D2240 strength ASTM-D412 as approved by the Engineer in charge. (Base rate of the polycarbonate sheet Rs. 2500/Sqm)

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Supplying and installation high-density, non-asbestos cement fibre boards conforming to IS 14862:2000. The boards shall be weather resistant, moisture resistant, termite proof, rot proof, and non-combustible. as per standard sizes fixed with Cement fibre boards shall be fixed with stainless steel self-drilling/self-tapping screws with EPDM washers. self-drilling.Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 30 to 45 mm. Cement Fiber Board 9 mm thick as per IS 14862:2000 of Type A (High pressure Steam Cured) Base rate of cement board Rs. 950/Sqm. (Make: Everest, Ramco, Visaka Industries Limited)

Protective coating system over terracotta jalli,stone, masonry and concrete : Applying one part, acrylic based plasto-elastic, UV Stable, crack-bridging anti carbonation protective coating system of 200 microns DFT with Silane Siloxane modified Primer and applying one coat of transparent coating based on acrylic dispersions for stone, masonry and concrete. First Coat : Elastic Primer Consumption: 0.25 kg/m2. Second Coat : Elastic Coating. Consumption: 0.30 kg/m2/coat. Third Coat : Clear Coat (Two or more coat) Base rate of Silane Siloxane modified Primer and Elastic Coating is Rs.215/-per Sqm. Base rate of Transparent coating based on acrylic dispersions.Rs.250/Sqm. (Make: Pidilite, SIKA, Dush)

DSR code

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.110 mm diameter

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum moisture resistant board

Providing & fixing of terracotta roof tile of Size 40x25 cm, thickness not less than 20 mm as per approved pattern on steel frame work including painting complete (steel frame work to be paid separately).Tile pattern, colour, shade and layout shall be as approved by the Architect. (Base rate of terracotta clay tile Rs. 35/-per no)

Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately).

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Flashings/ Aprons for valleys of roof (Upto 600 mm)

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, circular, rectangular, angles, tees and flats etc

Dismantling tile work in walls, floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: shingles

Dismantling aluminium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 5 km initial lead at contractors own risk, for all leads including all lifts involved.

Providing and fixing of Laterite tiles of size 30x15 cm with thickness of 16 to 18 mm laid with special approved adhesives over smooth surface,including pointing in white cement with an admixture of pigment to match the stone shade. The rate is inclusive of labour cost, material etc. All works as approved by Engineer-in-Charge. Make: REDZTONE/Kerala Tiles Company (Base rate of laterite tile - Rs.142/sqm)

Providing and laying terracotta jalli works with 60 mm thick in super structure above plinth level up to floor V level with necessary vertical and horizontal ms frame support at an interval of 2 mtr with approved jalli laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of MS frame work shall be made for seperately) Size of jaali 200x200x60mm, Make: Nuvocotto (Base rate of jaali Rs.150/- per nos.)

Providing and applying exterior paint system on fiber cement board façade, comprising one coat of alkali-resistant acrylic exterior primer followed by two coats of premium 100% acrylic weatherproof exterior emulsion paint, including surface preparation, filling of joints with approved jointing compound and fiberglass mesh tape, scaffolding, tools, labour, and all incidental works, complete as per the manufacturer's specifications. (Base rate of paint Rs. 413/kg)

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing UPVC gutter of 160mm wide, 100mm deep, 3mm thick (white) added rib for extra strength fitted with special type clamp at 60cm c/c all types of fittings like end drop, end cap etc all complete as per site condition, fixed to the edge of the roof with proper slope towards the downpipe, including all accessories, labor etc all complete as per the direction of Engineer-in-charge. Make: Aqua star/ Drop star/Euro Guard (Base rate of uPVC gutter - Rs.600/Mtr)

Providing and fixing toughned glass of 10mm thick to existing handrail portion including dismantling/cutting existing SS handrail with necessary fittings complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Supplying and installation high-density, non-asbestos cement fibre boards conforming to IS 14862:2000. The boards shall be weather resistant, moisture resistant, termite proof, rot proof, and non-combustible. as per standard sizes fixed with Cement fibre boards shall be fixed with stainless steel self-drilling/self-tapping screws with EPDM washers. self-drilling.Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 30 to 45 mm. Cement Fiber Board 9 mm thick as per IS 14862:2000 of Type A (High pressure Steam Cured) (Make: Everest, Ramco, Visaka Industries Limited)

Protective coating system over terracotta jalli,stone, masonry and concrete : Applying one part, acrylic based plasto-elastic, UV Stable, crack-bridging anti carbonation protective coating system of 200 microns DFT with Silane Siloxane modified Primer and applying one coat of transparent coating based on acrylic dispersions for stone, masonry and concrete. First Coat : Elastic Primer Consumption: 0.25 kg/m2. Second Coat : Elastic Coating. Consumption: 0.30 kg/m2/coat. Third Coat : Clear Coat (Two or more coat) Base rate of Silane Siloxane modified Primer and Elastic Coating is Rs.215/-per Sqm. Base rate of Transparent coating based on acrylic dispersions.Rs.250/Sqm. (Make: Pidilite, SIKA, Dush)

DSR code

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing laterite/brick/solid block work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialv within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, circular, rectangular, angles, tees and flats etc

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 5 km initial lead at contractors own risk, for all leads including all lifts involved.

DSR code

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

HPL CLADDING: Design,supply and installation of 6mm thick exterior grade HPL laminate panels of standard size with both sides decorative layer. Panel should be high pressure laminate (HPL) as per exterior grade norms.Panels are double hardened including acrylic polyurethane resin which is thermally cured under high pressure. Installation should be done with aluminium powder coated rivets (with fixed & sliding points) with aluminium profiles for sheet to sheet joints. 63 x 38x2.5mm and at every 600 mm vertical connect with 63x35x2.5mm thick with wind load & dead load slots as per design, anchored by standard fischer or equivalent anchor fasteners along with thermal separators. Installation should be done using rear ventilated principles only which is ensured by providing ventilation gaps for the facade. The rate shall include cost and conveyance of all materials labour charges lead lift etc. complete as per drawing directed by the Engineer in charge. HPL with 60% Perforations for facade area. (Make: Greenlam/Century Ply)

Providing and fixing movable M.S.scaffolding for repainting the existing solar panel support , up to a height 10 mtr . Scaffolding shall be made with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase with working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .

DSR code

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement::4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish Size of Tile 600 x 600 mm (Base rate of tile - Rs. 600/sqm)

Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm (Base rate of tile - Rs. 600/sqm)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.110 mm diameter

Providing and fixing UPVC gutter of 160mm wide, 100mm deep, 3mm thick (white) added rib for extra strength fitted with special type clamp at 60cm c/c all types of fittings like end drop, end cap etc all complete as per site condition, fixed to the edge of the roof with proper slope towards the downpipe, including all accessories, labor etc all complete as per the direction of Engineer-in-charge. Make: Aqua star/ Drop star/Euro Guard (Base rate of uPVC gutter - Rs. 600/Mtr)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Flush/ Ruled pointing

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Providing &fixing UV Stabilized Poly carbonate compact sheet 4mm thick crystal sheet with UV protection treatment weight not less than 4800 GM/SQM. Light transmission of 90%.The masking carrying instruction as to which side UV protected the same side should be installed facing out wards. Fire retardant confirming to IS 1443- 1987,Aluminium 50mm thick leak proof fixing management system, confirming IS 733-1987 alloy 606376 EPDM rubber gaskets, Silicone sealent, cold forged fasteners to be used for fixing the polycarbonate sheeting. EPDM rubber gaskets shall be as per ASTM - D2240 strength ASTM-D412 as approved by the Engineer in charge. (Base rate of the polycarbonate sheet Rs.2500/Sqm)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineerin-charge.

Demolishing laterite/brick work/Solid block manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialv within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, circular, rectangular, angles, tees and flats etc

Dismantling tile work in walls, floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling roofing including ridges, hips, valleys and gutters etc., within 50 metres lead of: shingles G.S. Sheet.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 5 km initial lead at contractors own risk, for all leads including all lifts involved.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)

Providing and fixing 4mm thick ACP sheet in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

DSR code

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (Copper oxidized as per IS : 1378)250x10 mm

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete : 125x90x4.00 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

Providing and fixing to existing door frames. 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Dismantling and carefully removing existing gypsum false ceiling at all heights, comprising gypsum boards, complete with galvanized GI framework consisting of perimeter channels, ceiling sections, intermediate channels, hangers, angle cleats, connecting clips, fasteners, screws, jointing compound, tapes, and all associated accessories. The work shall include dismantling of light fittings or any other MEP services , lowering the dismantled materials carefully, stacking serviceable materials as directed by the Engineer-in-Charge, removing unserviceable materials and debris from the site, and making good any minor damages caused during dismantling, complete as directed by the Engineer-in-Charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum moisture resistant board

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for superstructure 20 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand)

Providing and fixing 12 mm thick frameless toughened glass door shutter and fixed glass partition of approved brand and manufacture including patch fittings, and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in-charge (Door handle, lock and heavy duty floor spring etc.to be paid separately)

Supply of SS corner lock for toughened glass door of 12mm thick with weight up to 200 kg (Make: Dorma/ Hormann, Base rate - Rs. 3300/no)

Providing and fixing double action hydraulic heavy duty floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (Make :Dorma/ Hormann, Base rate - Rs. 10000/no)

Supply of stainless steel handle for toughened glass door, H- type of size 450 mm and 25 mm dia with satin finish of reputed make (Make: Dorma/ Hormann, Base rate - Rs. 4800/pair)

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area beyond 3 sq. metres

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 5 km initial lead at contractors own risk, for all leads including all lifts involved.

DSR code

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a)Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b)Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 5 km initial lead at contractors own risk, for all leads including all lifts involved.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Supplying and installation high-density, non-asbestos cement fibre boards conforming to IS 14862:2000. The boards shall be weather resistant, moisture resistant, termite proof, rot proof, and non-combustible. as per standard sizes fixed with Cement fibre boards shall be fixed with stainless steel self-drilling/self-tapping screws with EPDM washers. self-drilling.Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 30 to 45 mm. Cement Fiber Board 9 mm thick as per IS 14862:2000 of Type A (High pressure Steam Cured) (Make: Everest, Ramco, Visaka Industries Limited)

Providing and applying exterior paint system on fiber cement board façade, comprising one coat of alkali-resistant acrylic exterior primer followed by two coats of premium 100% acrylic weatherproof exterior emulsion paint, including surface preparation, filling of joints with approved jointing compound and fiberglass mesh tape, scaffolding, tools, labour, and all incidental works, complete as per the manufacturer's specifications. (Base rate of paint - Rs. 413/kg)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Providing and fixing 12 mm thick frameless toughened glass door shutter and fixed glass partition of approved brand and manufacture including patch fittings, and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in-charge (Door handle, lock and heavy duty floor spring etc.to be paid separately)

Supply of stainless steel handle for toughened glass door, H- type of size 450 mm and 25 mm dia with satin finish of reputed make (Make: Dorma/ Hormann, Base rate - Rs. 4800/pair)

Supply of SS corner lock for toughened glass door of 12mm thick with weight up to 200 kg (Make: Dorma/ Hormann, Base rate - Rs. 3300/no)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 200 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-inˇcharge. Heavy Duty Floor spring with door opening width upto 1200mm (Make :Dorma/ Hormann, Base rate - Rs. 10000/no)

DSR code

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing & fixing UV Stabilized Poly carbonate compact sheet 4mm thick crystal sheet with UV protection treatment weight not less than 4800 GM/SQM. Light transmission of 90%.The masking carrying instruction as to which side UV protected the same side should be installed facing out wards. Fire retardant confirming to IS 1443- 1987,Aluminium 50mm thick leak proof fixing management system, confirming IS 733-1987 alloy 606376 EPDM rubber gaskets, Silicone sealent, cold forged fasteners to be used for fixing the polycarbonate sheeting. EPDM rubber gaskets shall be as per ASTM - D2240 strength ASTM-D412 as approved by the Engineer in charge (Base rate of the polycarbonate sheet - Rs. 2500/Sqm)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing & laying BUFFALLO GRASS turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same,with sprinkler and maintenance for 6 months or more till the grass establish properly, as per direction of officer-incharge.

Providing and fixing UPVC gutter of 160mm wide, 100mm deep, 3mm thick (white) added rib for extra strength fitted with special type clamp at 60cm c/c all types of fittings like end drop, end cap etc all complete as per site condition, fixed to the edge of the roof with proper slope towards the downpipe, including all accessories, labor etc all complete as per the direction of Engineer-in-charge. Make: Aqua star/ Drop star/Euro Guard ( Base rate of uPVC gutter - Rs. 600/Mtr)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.110 mm diameter

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing laterite/brick work/Solid block manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialv within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, circular, rectangular, angles, tees and flats etc

Dismantling roofing including ridges, hips, valleys and gutters etc., within 50 metres lead of: shingles G.S. Sheet

DSR code

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Removing white or colour wash / algae by scrapping with sand papering /water jet and preparing the surface smooth including necessary repairs to scratches etc. complete

DSR code

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for :Column

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing plain Multipurpose Cement board (High Pressure steam cured) as per IS : 14862,with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) : 6mm thick cement board.

Providing and fixing shingle roofing comprising approved colour and profile asphalt/fibreglass roofing shingles of approved make, laid over 6 mm thick cement fibre board fixed to the supporting roof framework with self-drilling screws, washers and approved fasteners, complete with all necessary underlayment (where specified), starter strips, ridge and hip shingles, flashings, drip edges, valleys, sealants, nails/fasteners and accessories as recommended by the manufacturer(rate is inclusive of the mentioned). The cement fibre board shall be securely fixed to the supporting framework in true line and level to receive the shingles. The shingles shall be installed with the required overlap, staggered joints and proper alignment to ensure a watertight roofing system, including cutting, fitting around roof penetrations, finishing at ridges, hips, valleys and eaves, complete in all respects as per the approved drawings, manufacturer's specifications and the direction of the Engineer-in-Charge. (Rate is exclusive of framework & cement board etc ) (Make: Saint Gobain / Technonicol / IKO)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, circular, rectangular, angles, tees and flats etc

Providing &fixing UV Stabilized Poly carbonate compact sheet 4mm thick crystal sheet with UV protection treatment weight not less than 4800 GM/SQM. Light transmission of 90%.The masking carrying instruction as to which side UV protected the same side should be installed facing out wards. Fire retardant confirming to IS 1443- 1987,Aluminium 50mm thick leak proof fixing management system, confirming IS 733-1987 alloy 606376 EPDM rubber gaskets, Silicone sealent, cold forged fasteners to be used for fixing the polycarbonate sheeting. EPDM rubber gaskets shall be as per ASTM - D2240 strength ASTM-D412 as approved by the Engineer in charge (Base rate of the polycarbonate sheet - Rs.2500/Sqm)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing UPVC gutter of 160mm wide, 100mm deep, 3mm thick (white) added rib for extra strength fitted with special type clamp at 60cm c/c all types of fittings like end drop, end cap etc all complete as per site condition, fixed to the edge of the roof with proper slope towards the downpipe, including all accessories, labor etc all complete as per the direction of Engineer-in-charge. Make: Aqua star/ Drop star/Euro Guard (Base rate of uPVC gutter - Rs.600/Mtr)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.110 mm diameter

DSR code

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineerin- charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 5 km initial lead at contractors own risk, for all leads including all lifts involved.

DSR code

WIRING

Upto 35 sq. mm

Upto 35 sq. mm (clamped with 1mm thick saddle)

Parking areas near to the admin building (Roof 1-5))

Dismantling of existing light fixtures and cables carefully including stacking the material in position as directed by Engineer-in-charge

Scootter parking area near the entrance

Dismantling of existing light fixtures and cables carefully including stacking the material in position as directed by Engineer-in-charge

Corridor area - Reinstallation of light fixtures and accessories

EARTHING

DSR code

Supply and fixing of Premium quality 3D metal lip illuminated signage at the centre of existing wall (ENTRANCE): The Logo made of fully 3 or 4mm thick 040 acrylic 50mm projection0.8mm thick ss mirror finish (2cm lip inside) asper the drawing : LED Make : Impex Plus 2 w (Built by Samsung Chip set) Colour : Warm W. Power supply make: Impex ( Two-year warranty.) Size: 110x110 cm (Signage make- 3M,LG)

Supply and fixing of Illuminated 3D Logo (2nos) and Letters at the Admin Block : The Logo made of fully 3 or 4mm thick 040 acrylic 50mm projection with aluminium trim cap beeding asper the design:LED Make : Impex Plus 2 w (Built by Samsung Chip set) Colour : Warm W. Power supply make: Impex (Two-year warranty.) Logo 1&2 Size: 699x501mm , Letters size: 3050x350mm (Signage make- 3M,LG)

Supply and fixing of Illuminated 3D Logo -3 at the Admin Block, Over ACP for covering Pipeline & Assembly point : The Logo made of fully 3 or 4mm thick 040 acrylic 50mm projection with aluminium trim cap beeding as per the design:LED Make : Impex Plus 2 w (Built by Samsung Chip set) Colour : Warm W. Power supply make: Impex (Two-year warranty.) Logo Size: size :1146x821mm (Signage make- 3M,LG)

Printing Supply and pasting of Opaque film through the Glass door, (Print Detail: HLL Logo with writing) (Signage make- 3M,LG)