Fabrication of C.G.I Shed Near Divisional Office for Storage of official records and other allied works at Mechanical Division Baramulla.

Amount

Earth work in excavation by manual means over areas (exceeding 30 cm and upto 1.5m in depth, 1.5 m in width as well as 10 Sqm on plan) including disposal of the excavated soil upto 1m for cutting edges, disposal of earth is to be levelled and neatly dressed.

Providing and laying of stone soling of specified grade (Nallah Boulders upto 6" nominal size ) hand packed including levelling, ramming, watering etc.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works upto plinth level, 1:2:4 (1 Cement: 2 Coarse sand : 4 graded stone aggregate, 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns etc. for mass concrete.

4" M.S. 'B' Class Pipe. The pipe is to be grouted with the foundation to act as posts for carrying the Truss Structure. The job includes cutting, welding providing of base plate and embedding the same in the cement foundation with 300mm long bolts etc. as required at site. The job further includes application of two coats of red oxide primer.

Providing and fixing of Painted corrugated sheets (preferably green colour) comprising of 0.6 mm thick sheets fixed to the supporting structure with 8mm dia. GI, J/L hooks, GI limpets and bituminous felt washers, complete but excluding cost of supporting structure.

Providing and fixing of angle iron for Structural steel work in built up sections, trusses and framed work and Providing and fixing of flat iron for fabrication of racks and wire mesh fencing. After installation, the steel structure shall be applied with two coats of red oxide primer.

Providing and fixing of welding type wire square mesh of 25mmx25mm with wire gauge of 14. The mesh is to be welded on angle iron and then covered by the flat iron. After installation, the steel structure shall be applied with two coats of red oxide primer, followed by two coats of paint of green shade.

Providing & fixing of highly resistant surface impregnated with melamine resins, AC4 or equivalent, 8 mm thick laminated MDF paneling of desired shade over walls of office room. Make: UNIFI, Greenply, Action-Tesa, Kronotec, Olivo.

Providing and fixing of frame work to be cut out of 25 mm ply sheet of maximum dimensions. The width of the frame work strip piece should be 2ʺ , to be fixed at a distance of one (01′) feet (12 inches) from each other.

Providing and fixing of matching conical beading /cornices to the corners of the rooms to cover the cutting edges of the floor and walls

Providing and fixing of PVC cornices to the corners of the rooms to cover the cutting edges of the floor and walls.

Demolishing cement concrete 1:3:6 or richer mix manually / by mechanical means including disposal of material within 50 mtrs lead as per directions of Engineer in charge

Cement concrete flooring 50mm thick with 20mm nominal size stone aggregate (crushed) of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc complete

Providing and fixing ist quality Vitrified floor tiles conforming to IS : 15662 of minimum thickness 8mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundry, bottle green, black of any size as approved by Engineer in Charge in skirting, risers of steps and dodos over 12mm thick bed of Cement Mortar 1: 3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pinting in white cement mixed with pigment of matching shade complete. Size of tile 600x600 mm

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications over and including priming coat with water thinnable cement primer

Providing and fixing 35mm glazed shutters of First class kail wood for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

M/s NAZIR AHMAD KHAN

NEW AHANGER ENGINEERING WORKS