Development of Jawahar Park in Ward No 04 Sunder Nagar Distt Mandi

Amount

Earth work in excavation by mechanical means(Hydraulic excavator) / manual means in foundationtrenches or drains (not exceeding 1.5 m in width or 10sqm on plan), including dressing of sides and rammingof bottoms, lift upto 1.5 m, including getting out theexcavated soil and disposal of surplus excavated soil asdirected, within a lead of 50 m. All kinds of soil.

Providing and laying mechanically mixed and vibrated cement concrete 1:5:10(1 cement:5 sand:10 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinths. (Crushed/broken stone aggregate to be used)

Random rubble masonry with hard stone in foundationand plinth including levelling up with cement concrete1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Stone work ashlar punched (ordinary work) in superstructure upto floor two level in cement mortar 1:6 (1cement:6 sand) including pointing with cement mortar 1:2(1 cement : 2 sand)

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30xx5mm so as to give a fair finish including cantering, shuttering and propping etc. with wooden battens and ballies, height of propping and centering bellow supporting floor to ceiling not exceeding 4 mtr. And removal of the same for insitu-re-inforced concrete & plain concrete work: Vertical surface such as walls( any thickness) partitions and the like including attached pilasters buttress, plinth and string courses and the like.

Reinforced mechanically mixed and vibrated cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up tofloor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3graded stone aggregate 20 mm nominal size) (Crushed/broken stone aggregate to be used)

Steel reinforcement for R.C.C. work includingstraightening, cutting, bending, placing in position andbinding all complete upto plinth level. Mild steel and Medium Tensile steel bars

Brick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in superstructure aboveplinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

KULDEEP SINGH

NARENDER KUMAR