REPAIRS TO SECURITY WALL, BARBED WIRE FENCING, GATES, CHAIN LINK FENCING ETC. AT AF STATION, BAREILLY

Amount

Dismantling posts or struts (wood, steel or RCC) any section, embedded in concrete, brick work, masonry etc. including taking out embedded portion and making good disturbed surfaces all as directed.

Dismantling fencing wire mesh, any type

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, sub base for flooring etc. all as specified and as directed.

M&L for mild steel work in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified

Supply only Chain link MS galvanized fencing, any size or type all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and as directed.

Supply only 10mm dia mild steel bars as in line wires for chain link fencing all as specified.

M&L for preparation of new or previously untreated steel/ iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

S&F in repairs Galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

M&L for brick work with fly ash bricks straight or curved on plan exc. 6m mean radius using old size bricks built in cement mortar (1:6) all as specified.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement all as specified and as directed

Providing and fixing concertina coil fencing with punched tape concertina coil of any dia, having 50 Nos rounds per 6 metre length (before stretching), on up to 3 m height of wall with ‘Y’ shaped angle iron brackets placed 2.4m to 3.00m apart, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, with reinforced barbed tape (R.B.T.)/ spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq.cm with tape (0.5mm thick) and weight 43.478 gm/m complete all as specified and as directed including taking down existing rusted coil. Notes: (i) Angle iron supports shall be measured and paid separately under relevant items of Schedule ‘A’ (ii) Measurement shall be made for stretched length.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W (Gde-E- 250), quality-A all as specified.

M/s Agarwal Builders

M/S Quality Constructions