CONSTRUCTION AND RENOVATION IN SHREE VEERBHADRESHWAR TEMPLE IN HUMNABAD

DEMOLITION WORK

Demolishing stone rubble masonry manually/ by mechanical means

including stacking of serviceable material and disposal of unserviceable

material to the appropriate disposal area as per direction of En...

Demolishing R.C.C. work manually/ by mechanical means including stacking

of steel bars and disposal of unserviceable material to the appropriate

disposal area as per direction of Engineer-in-charge. (...

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. Asbestos cement sheet (PWD DSR ...

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...

EXTERNAL SERVICES WORK

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500X700 mm internal ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

DETAIL ESTIMATE UP TO PLINTH LEVEL

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work (PWD DSR 2023-2024 IT NO. 3.1, PNO.17)

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Formwork for Foundation 8% of finished rate of concrete

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Formwork for Columns & piers 70% of finished rate of concrete

Formwork for Beams & Lintels 50% of finished rate of concrete

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations and other similar works etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by r...

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

DETAIL ESTIMATE OF GROUND FLOOR ABOVE PLINTH LEVEL

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Formwork for Columns & piers 70% of finished rate of concrete

Formwork for Roof 50% of finished rate of concrete

Formwork for Beams & Lintels 60% of finished rate of concrete

Formwork for stair 50% of finished rate of concrete

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Formwork for chejja 45% of finished rate of concrete

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) inc...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side...

Clamps - MS (SL.NO 402)

Providing and fixing in position fully panelled Teak wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing an...

Providing and fixing chromium plated brass 100 mm mortice latch and lock

with 6 levers and a pair of lever handles of approved quality with necessary

screws etc. complete.(PWD DSR 2023-2024 It. No. 12...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: (PWD DSR 2023-2024 It. No. 8.82,...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Each frame 6 nos clamps - MS (SL.NO 402)

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing chromium plated brass 100 mm mortice latch and lock

with 6 levers and a pair of lever handles of approved quality with necessary

screws etc. complete.(PWD DSR 2023-2024 It. No. 12...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PW...

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and laying of asphaltic plug joint to provide for horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm...

Providing and fixing suitable plaster mesh 100mm wide manufactured

out of hot dipped galvanised iron of nominal thickness 0.35mm with a

zinc coating of 120g/m2 width, along route of walls chipped for ...

8.16 a Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia

mild steel bars at 20 cms. c to c both horizontally and vertically fixed with

chicken mesh for drop chajja,facia, backing ...

DETAIL ESTIMATE OF FIRST FLOOR

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Formwork for Columns & piers 70% of finished rate of concrete

Formwork for Beams & Lintels 60% of finished rate of concrete

Formwork for Roof 50% of finished rate of concrete

Formwork for Beams & Lintels 60% of finished rate of concrete

Formwork for stair 50% of finished rate of concrete

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Formwork for chejja 45% of finished rate of concrete

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) inc...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Each frame 6 nos clamps - MS (SL.NO 402)

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing chromium plated brass 100 mm mortice latch and lock

with 6 levers and a pair of lever handles of approved quality with necessary

screws etc. complete.(PWD DSR 2023-2024 It. No. 12...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PW...

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and laying of asphaltic plug joint to provide for horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm...

Providing and fixing suitable plaster mesh 100mm wide manufactured

out of hot dipped galvanised iron of nominal thickness 0.35mm with a

zinc coating of 120g/m2 width, along route of walls chipped for ...

8.16 a Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia

mild steel bars at 20 cms. c to c both horizontally and vertically fixed with

chicken mesh for drop chajja,facia, backing ...

ELECTRICAL ESTIMATE

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping casing capping using 2x1.5mm2

(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi

strand PVC insulated copper wire (...

Medium point above 3.0M upto 6.0M from tapping point to outlet via switch box (Page no-3,Item no-2.2.2)

Long point above 6Mtr upto 10Mtr from tapping point to out let via switch (Page no-3,Item no-2.2.3)

Two outlet in a row , above 3Mtr upto 6Mtr from tapping point to out let via switches (Page no-3,Item no-2.2.4)

Three outlet in a row, above 6Mtr upto 10Mtr from taping point to out let via switches (Page no-3,Item no-2.2.5)

Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.Cwall a) 1-2Way (Page...

b) 3Way (Page no-8, Item no-3.4.2)

c) 4-5 way (Page no-8, Item no-3.4.3)

d) 6Way (Page no-8, Item no-3.4.4)

e) 8Way (Page no-8, Item no-3.4.5)

f) 10-12way (Page no-8, Item no-3.4.6)

g) 16 Way (Page no-8, Item no-3.4.7)

h) 18 Way (Page no-8, Item no-3.4.8)

Supplying and fixing superior quality modular switch mounting polycorbonate plate with neceaary supporting back plate with required nos. of machine screwes, bolts nuts etc., complete.on the existing m...

a) 3 Module (Page no-8,Item no-3.5.2)

b) 4module (Page no-8, Item no-3.5.3)

c) 6 Module (Page no-8, Item no-3.5.4)

d) 8 Module (Page no-8, Item no-3.5.5)

e) 10-12 Module (Page no-8, Item no-3.5.6)

e) 16 Module (Page no-8, Item no-3.5.7)

e) 18 Module (Page no-8, Item no-3.5.8)

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293. a) 6Amps one way Switch (Page no-9, Item no-3.6.1)

b) 6Amps two way Switch (Page no-9, Item no-3.6.2)

c) 6A Three Way socket (Page no-9, Item no-3.6.3)

d) 16A One Way Switch (Page no-9, Item no-3.6.7)

e) 6-16A Universal socket. (Page no-9, Item no-3.6.10)

f) Stepped Fan Regulator Two Module (Page no-9,Item no-3.6.4)

g) TV/Telephone socket (Page no-9,Item no-3.6.11)

h) RJ45/I.O Outlet Cat-6 (Page no-9,Item no-3.6.12)

Supplying And Fixing Metal Fan Box with Round Hook (SR 22-23 Page no-4, Item no-1.13)

CIRCUIT & MAINS Concealed Conduit System: Supplying 19mm dia 2/ 2.5mm thick heavy guage PVC conduit pipe with suitable size bends, Metal/PVCjunction boxes, adhesive paste etc, and running before concr...

25mm dia 2mm thick for lighting circuit, UPS circuit, AC circuit & Power circuit and Lan, CCTV circuits (Page no-2, Item no-1.2.2)

32mm dia 2.5mm thick (Page no-2, Item no-1.2.3)

Groove cutting Supplying 19mm dia 2/2.5mm thick heavy guage PVC conduit pipe with suitable size bends, Metal/PVCjunction boxes, adhesive paste etc, and bracing U or J hooks and cement plastering upto ...

25mm dia 2mm thick for lighting circuit, UPS circuit, AC circuit & Power circuit and Lan, CCTV circuits (Page no-2, Item no-1.3.2)

32mm dia 2.5mm thick (Page no-2, Item no-1.3.3)

Group A Materials Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or consealed system of wiring specified IS-694 c...

e) 10 sqmm (Page no-5,Item no-2.3.6)

Distribution Boards :Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand'C'Typecurve,indicatorON/OFF,energycross- 3with Short circuit breaking capac...

6-32 Amps DP MCB

50-63 Amps DP MCB

6-32 Amps TPN MCB

50-63 Amps TPN MCB (Page no-18, Item no-5.18.9)

Supplying,fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. (Page no-18, Item no-5.20) 32-40 Amps 2 Pole

32-40 Amps 4 Pole

Supplying and fixing regular MCB distribution boards on wall/woodboard/flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 pha...

4 Way TPN DB (5.19.11)

Supply of Fittings : Supplying&fixingretrofittype-PL-LEDLamp......WLEDlinearsourcewithCCT6500degreeK,CRI70%.efficacy80lumenperW,life25000burninghoursandCompliancetoIS10322/IEC60598,LM79&LM80.TheLEDare...

Supplyinging of ..... feet-LED PVC square batten integrated LED tube....W with high quality diffuser with life of 25000 burning hours&70% lumen maintence with CRI 80.Power input:220-240V@50hz&power fa...

Led light fitting 1x2' - 9/10Watts (Page no-43, Item no-11.3.1)

Supplying and fixing of retrofit type PL- LED lamp …W LED linear source with CCT 6500 degree K CRI 70% efficeancy 80 lumen per watt life 25000 IEC 60598 LM 79 & LM 80, The LED are driven by HF el...

Supplying and fixing PBBC /bakelite straight or slant batten holder head fitting with GI wire guard , glass cover with 60/100 watss 230V lamp (Page no-10, Item no-3.14.6)

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with

bracket blades complete for light duty suitable to operate on

230V 50Hz, AC Supply. (SR 23-24 Page no-30, Item no-6.1, )

Supplying of 1440rpm heavy duty exhaust fan with bracket

blades suitable to operate on 230V 50Hz, AC Supply complete. (SR 23-24 Page no-30, Item no-6.2.2, ) 15" Sweep ( 450 mm )

Supplying of Ceiling Fan with Capacitor rating As per

guideline of BEE 5 star rating and IS:374/79 and also

comply with IS: 1709/1984 with latest amendment, Rated

voltage 220 V/50 Hz, Rated power inpu...

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with

bracket blades complete for light duty suitable to operate on

230V 50Hz, AC Supply. (SR 23-24 Page no-30, Item no-6.1, )

Fixing Charges : Fixing all types and all capacities fluorescent / false ceiling/spotIight/ CFLfittings indoor on the wall/ ceiling/rafters / girders using 23/0.0076" twin twisted RVC insulated wires,...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

Fixing one exhaust fan in the nitch already left in the wall with

bolts and nuts and 5 A. ceiling rose with sufficient length of

23/0.0076 inch PVC insulated twin core wire.(SR 23-24 Page no-57, Item ...

Supplying and Fixing of........mm dia class A GI pipe bracket

upto 2 ms long bent at suitable angle and fixing to this

bracket 1x40/2x40 W fluorescent tube street light fitting of all

capacities to GI...

Earthing: Supplying fixing and wiring earth electrode forg rounding o flifts ,transformers ,DGsetsetc using 40mm dia 2.9mmthick2.5mlongGIpipewithGIfunnelwithmeshandsuitablesizereducerfixedonthetopofth...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (Page no-55,Item no-7.3) GI Strip (Page no-54, Item no-12.58.2) a) 25x3mm

Supplying and running GI/Copper conductor for grounding and (along other wires in conduit sysytem of wiring) using necessary suitable size clamps,nails,guttas,spacers etc 8 SWG

Electrical Panel Board Supplying, fixing and wiring 50/5 to 400/5A 5VA burden

Current Transformer Class 0.5 accuracy with Tape Wound..(Page no-19, Item no-5.34)

Supplying and fixing of LED type panel board indicating

lamp with required colour suitable for 230/440VAC. 50 Hz

12/24V D.C..(Page no-19, Item no-5.38)

Supplying, fixing and wiring earth leakage relay with core

balanced current transformer suitable for single phase 50 Hz

AC with latest microcontroller based, digital readout of

percentage leakage curr...

Supplying and fixing Moulded Case Circuit Breaker (MCCB)

over the existing wood/panel board using necessary screws,

bolts, nuts, necessary phase separators, handle and wiring

complete. Protection of O...

Supplying of 100A On load Change over switches 4 poles AC - 23A duty , 415 , 50 HZ (Page no-15, Item no-5.11.2)

Supplying fixing and wiring rotary selector switch suitable for voltmeter (Page no-19, Item no-5.28)

Supplying fixing and wiring rotary selector switch suitable for Ammeter (Page no-14,Item no-5.27)

Suppying , fixing and wiring 0 to 600 volts 96*96Mm AC voltmeter on existing panel /wood board (Page no-14,Item no-5.22)

Supplying ...100A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve , mounted on phenolic /FRP/ DMC insulator w...

Supplying and fixing miniature circuit breaker on existing panel using necessary fixing materials Outgoings ( Out goings ) (Page no-17, Item no-5.18) 32A DP MCB (5.18.4)

50-63A TPN MCB (5.18.9)

Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. flat ... with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. (P...

Fabricating supplying and mounting MS box made out 14SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped wit...

Supplying and fixing hylum brand hand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc.and fixing on existing wood or metal box using N.F. screws. (Page no-9, Item n...

Supplying of 1.1 kV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, gaalvanized, steel strip (expect 2Cx10Sq.mm wire armoured) confirming to IS-3975:1990 (No. of strip in...

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe/ Stoneware pipe / on wall / on pole as required.(Page no-61,Item no-7.8) in existing trench / duct 2.5 sqmm to 25 sqmm (Pa...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Cutting road surface (Page no-64,Item no-29.11)

providing and filling sand in excavated ternch to cover laid UG cable to depth 150 mm all- round the cable. (Page no-62,Item no-7.10)

Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KVclass (metal only) (Page no-62,Item no-7.14) 32mm dia (Page no-62,Item no-7.14.4)

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes (Page no-64,Item no-7.21) 25 sqmm (Page no-64,Item no-7.21.10)

Supply and laying Double walled corrugated (DWC) HDPE pipe including all necessary connecting sockets/ couplings /Tees/Bends/Endcaps of same materials in existing trench as per IS 14930 Part-II suitab...

Telephone & Lan Concealed Conduit System:; Supplying 19mm dia 2/ 2.5mm thick heavy guage PVC conduit pipe with suitable size bends, Metal/PVCjunction boxes, adhesive paste etc, and running before conc...

25mm dia 2mm thick for lighting circuit, UPS circuit, AC circuit & Power circuit and Lan, CCTV circuits (Page no-1, Item no-1.2.2)

Groove cutting Supplying 19mm dia 2/2.5mm thick heavy guage PVC conduit pipe with suitable size bends, Metal/PVCjunction boxes, adhesive paste etc, and bracing U or J hooks and cement plastering upto ...

25mm dia 2mm thick for lighting circuit, UPS circuit, AC circuit & Power circuit and Lan, CCTV circuits (Page no-1, Item no-1.3.2)

Supplying and drawing UTP-CAT6E LAN cable. (Page no-36, Item no-8.1) Group A

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable of approved make. 2 Pair (Page no-36, Item no-8.2.2) Group A

5 Pair (Page no-27,Item no-8.2.5) Group A

Coaxial TV RG6 cable (Page no-36, Item no-8.3)

Supply and fixing of 10-Pair junction box in wall in a concealed manner using 200X200X50mm MS box (Page no-2, Item no-1.4.7)

Supply and fixing of 10 Port 10/100 LAN Switch box (Page no-85,Item no-11.9.5)

Supply and fixing of Patch panel for Lan cabling (Page no-37, Item no-8.12.3) 16 port 10/100 patch panel

Supplying and Fixng of I/O socket with Back Box DOUBLE I/O Supply & Installation (Page no-37, Item no-8.10.2)

Energy Meter Cubical : Fabricating supplying and mounting MS box made out 14SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged ...

Supplying and fixing Miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 'C' type curve energy across-3 with short circuit ...

Supplying,fixingandwiringElectronicTrivectorMeter(ETV)5to32/63Athreephase4wirewholecurrentclass-1AccuracyEnergyMeter. (Pg-19, It 5.35)

Supplying and fixing of LED type panel board indicating

lamp with required colour suitable for 230/440VAC. 50 Hz

12/24V D.C. (S.R 23-24 Page no-19, Item no-5.38)

Supplying & Fixing of Porciline Fuse Channel with Cut Out on existing wooden/ panel using …. as per IS specification with necessary bolts,nuts and washers etc.,complete.

SANITARY FIXTURES

Page.no 123 Item.no 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including f...

Page.no 132 Item.no 14.7.5 "Providing and fixing wash basin with C.I. brackets, 15 mC.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutt...

Page.no 119 Item.no 13.12 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

Supplying & Installation

Page.no 137 Item.no 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.

Supplying & Installation

Page.no 128 Item.no 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass ...

Page.no 126 Item.no 14.10.1.4 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and b...

INTERNAL SEWAGE SYSTEM

Providing, laying and jointing HDPE pipes of specified grade and

conforming to IS 4984-2016 with latest ammendments and conveying

to work site including loading and unloading at both destinations and

Page.no 94 Item.no 9.1.2 HDPE Grade PE80-PN6.0, 75mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe wi...

Page.no 122 Item.no 13.31.6 b) 50mm dia

Page.no 127 Item.no 13.59 "Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all

fitting arrangements & all necessary accessories complete"

Page.no 120 Item.no 13.22.1.1 Providing and fixing PTMT grating of approved quality and colour. 100 mm nominal dia( Page No-120, Item No - 13.2.1.1)

INTERNAL WATER SUPPLY SYSTEM(INSIDE)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Page.no 122 Item.no 13.32.3 c) 25 mm nominal OD Pipes

Page.no 122 Item.no 13.32.4 d) 32 mm nominal OD Pipes

Page.no 122 Item.no 13.31.5 e) 40 mm nominal OD Pipes

Page.no 122 Item.no 13.31.6 f) 50 mm nominal OD Pipes

Page.no 123 Item.no 13.33.7 g) 65 mm nominal OD Pipes

MR: Supplying, installing, 6mm thick elastometric insulation for hotwater supply lines & return lines inside & outside the toilet,joints with insulated with tape, as per manufacturer's recommendations...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :

Page.no 117 Item.no 13.4.5 a) 65mm dia (Screwed ends)

Page.no 117 Item.no 13.4.4 a) 50mm dia (Screwed ends)

Page.no 117 Item.no 13.4.2 b) 32 mm dia (Screwed ends)

Page.no 117 Item.no 13.4.1 c) 25mm dia (Screwed ends)

Page.no 117 Item.no 13.4.1 c) 25mm dia (Screwed ends)

Supplying, fixing and testing Puddle flanges for inlet, outlet, vent and overflow pipes, fittings with CI frame and cover to overhead water tank and under ground water tank complete with steps as show...

a) OVER HEAD WATER TANK

Approx. depth =2.0 Mts.

i) 2 nos. CI manhole frame and cover (medium duty)

(weight=45kgs.) with locking facility

(ii)65 mm dia = 3 nos

(v) 50 mm dia =4nos

vi) 2 nos. step ...

Supplying, installing, testing and commissioning approved make water level controller for the Underground Sump and overhead tank. The quoted rate shall include for necessary wiring in PVC conduit betw...

Page.no 117 Item.no 13.4.1 "KSRB 13-6.3-3: Providing and fixing in position brass gate Valve with C.I. wheel of

app. Quality (Screw End) 25 mm nominal bore including cost of all materials, labour and ...

EXTERNAL SEWAGE SYSTEM

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...

Page.no 124 Item.no 13.39 "Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 150 x 100 mm size P type With Non Modular common burnt clay bri...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...

WATER SUPPLY SYSTEM(OUT SIDE)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Construction of valve chamber with 230 mm best quality TM bricks in CM 1:4 over a bed of 100mm thick PCC 1:4:8, internal walls plastered smooth in CM 1:3 and external walls plasterd rough with sponge ...

Supplying, fixing in position approved make Bronze non-return valve conforming to IS 778 with unions etc., complete.

Supplying, installing, testing and commissioning butterfly valves with standard lever confirming to IS 13039 with necessary flanges, nuts and bolts etc., complete.

Supplying,installing,testing and commissioning approved make magnetic Flow meter and with necessary unions for fixing on the inlet main as shown on the drawing, etc., 'complete with necessary gate val...

Supplying, installing, testing and commissioning of Domestic Water lift mono block pump of adequate HP capable of giving required discharge at suitable head to work on 3 phase 50Hz 400/400 V with nece...

Supplying ,Commisioning, Lifting & testing approved make

3 Layers Sintex tank including accessories etc.

Cap:- 2000 Ltr.

RAIN WATER HARVESTING & DISPOSAL SYSTEM

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

MR: Construction of Sub soil well with Precast RCC Rings of 1200mm dia and 300 mm deep clear dimensions upto a depth of 3000 mm with RCC top cover slab and 600 x 600mm RCC pre-castcover,inlet arrangem...

SOLAR HOT WATER SYSTEM

Supply and installation 3000 LDP approved make Solar hot water system plate /tube structure with storage tank arrgangement , foundation ,storage tank stand and safe gurads for plates ,complete work as...