Strengthening/Upgradation of Inner Links at Ladoora

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :\

Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc.including carriage upto 20kms complete job

Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means).

Supply & filling of Khak-bajri/Nallah/querry Muck to the specified lines & grades in berms including dressing , watering and consolidation with p.r.r ,:

Supply and filling of Nallah Muck / Nallah bed material /GSB /Querry Muck including watering and compacting with p.r.r and all carriages.

Supplying, Laying, stacking, Spreading and compacting stone aggregate at site of size range 63-45mm Grade-Iind of specified sizes to WBM specifications in uniform thickness, hand picking rolling with 3-wheeled roller / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.Incl all leads lifts and carriages complete

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge

Providing and laying Bituminous Macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. including all carriages.

Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. including all carriages, On WBM/WMM @ 0.75 Kg/sqm. incl all carriage,head load,cost of material etc complete

Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.25 mm compacted thickness with bitumen of grade VG 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. including all carriages

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road Rollar all complete. including all carriages

Providing & laying of 300mm dia RCC spun pipes NP3 in position including earth work cutting, laying of pipes in position & re-filling by excavated materials, providing sufficient cushions over pipes including loading, unloading, & including all carriages of pipes f to site of work fcomple a)300 mm dia

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:

CC dain Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, incl removal of tree stumps and dewatering of trenches within a lead of 50 metres: All kinds of soil

Providing and laying of dry stone soling in foundations trenches tightly hand Packed with hand ramming, dresssing,watering including carriage of material from source to site of work complete

Providing and laying in position cement concrete 1:4:8 grade (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) (under Footings) of specified grade excluding the cost of centring and shuttering All work upto plinth level

Providing & laying cement conc. 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone agg. 40mm nominal size) including attached pilasters columns, piers, abutments, pillars, coping, bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excl: the cost of centring shuttring & finishing incl. all carriages.

Centring & shuttering incl: strutting, propping etc. & removal of form work for foundation etc.

12mm thick cement plaster in 1:4 mix on walls incl cost of material and all carriage complete

50mm thick cement conc. flooring using 1:2:4 mix & finished with finishing coat of neat cement.

Providing and laying in position cement concrete 1:1.5:3 grade (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) of specified grade excluding the cost of centring and shuttering All work upto plinth level incl all carriage and cost of material complete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.

Retaining/Edge wall Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, incl removal of tree stumps and dewatering of trenches within a lead of 50 metres: All kinds of soil

Providing and laying of dry stone soling in foundations trenches tightly hand Packed with hand ramming, dresssing,watering including carriage of material from source to site of work complete

Providing and laying in position cement concrete 1:4:8 grade (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) (under Footings) of specified grade excluding the cost of centring and shuttering All work upto plinth level

Providing & laying cement conc. 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone agg. 20mm nominal size) including attached pilasters columns, piers, abutments, R/E walls etc upto floor five level, excl: the cost of centering shuttering & finishing incl. all carriages

Centring & shuttering incl: strutting, propping etc. & removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc

Supply & filling of Quarry muck / RBM mixed with sand and boulders including ramming & watering and all carriages.

3 Mtr Box Culvert (02 No) Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, incl removal of tree stumps and dewatering of trenches within a lead of 50 metres: All kinds of soil

Providing and laying of dry stone soling in foundations trenches tightly hand Packed with hand ramming, dresssing,watering including carriage of material from source to site of work complete

Providing and laying in position cement concrete 1:4:8 grade (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) (under Footings) of specified grade excluding the cost of centring and shuttering All work upto plinth level

Providing and laying in position cement concrete 1:1.5:3 grade (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) of specified grade excluding the cost of centring and shuttering All work upto plinth level incl all carriage and cost of material complete

Centring & shuttering incl: strutting, propping etc. & removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc

Centring & shuttering incl: strutting, propping etc. & removal of form work for Suspended floors, roofs, landings, balconies and access platforms.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.

Supppling and filling of stone soling hand packed behind Rwall including carriage of material upto site of work.

Sign Boards and Road marking Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. a)Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm.

b)Cautionary/warning sign boards of equilateral triangular shape having each side of 900 mm support length of 3650mm.

Painting with thermoplastic road marking with glass beeds applying of 2.5mm thick (Rectoreflective) strip and zebra crossing markings using automatic applicator incl cleaning of surfaces with quantity of material 5.0Kg/Sqm and Glass beeds @250gms/Sqmetc complete

Add Maitance for lst year@ 10%.

Add Maitance for 2nd year @15%.

Add Maitance for3rd year @20%.

Add Maitance for 4th year @25%.

Add Maitance for 5th year @30%.

Please Enable Macros to View BoQ information