GE P/DDN/T-41 OF 23-24

Amount

Dismantling structural steel work including doors, gates but excluding framed truss etccomplete all as specified and directed.

Demolition of brick /stone work , built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast RCC articles and disposal of debris out of MoD land complete all as specified and directed.

Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified

S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for Hardcore of broken stone boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed.

M&L for 75 MM thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in floors complete all as specified and as directed.

M&L for 100 MM thick PCC 1:2:4 type B-1 using 20 mm graded aggregate as in floors complete all as specified and as directed.

S & F Artificial turf grass for volleyball court, Tiger turf atomic Pro 35 mm synthetic turf for entire volleyball court with international markings complete all as specified and directed.

M&L for SYNTHETIC 8 LAYER OUTDOOR SPORTS SYNTHETIC SURFACE as per below specification of 8 layers as fallows :- 1st layer of applying Acrylic Resurface mixed with approved grade of silica sand and cement and water and applied with rubber squeegee @0.020 per sq.ft as per manufacturers specifications. 2nd layer of applying SBR granules mixed with rebound liquid rubber resin and water @0.17 ltrs per sq.ft as per manufacturer's specifications. 3rd layer of applying SBR granular mixed with rebound liquid rubber resin and water @0.17 ltrs per sq.ft as per manufacturer's specification. 4th and 5ty layer of applying SBR granules mixed with rebound liquid rubber resin @0.017 ltrs per sq.ft as per manufacturer's specifications. 6th layer of applying acrylic filler layer mixed with approved grade of silca sand and water @ 0.025 ltrs per sq.ft as per manufacturer's specification. 7th and 8th layer of UV resistant rebound Acrylic colour of approved shade mixed with approved grade of silica sand and water @0.022 ltrs per sq.ft as per manufacturer's specification. Application of UV protected white rebound line marking as per international standards. Product should be manufactured under ISO: 9001 2008 quality management complete all as specified and directed.

S & F Steel work in tubular trusses/posts including special shaped washer and posts etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate in floor to receive the surface of tiles complete all as specified and directed

M & L Screed Bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 all complete all as specified and directed.

S & F for 12mm thick exterior Parking tiles laid and jointed with grey cement slurry mixed with pigment in floor to match the shade of the tiles set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and as directed

M&L Brick work with sub class 'B' brick, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L Brick work with sub class 'B' brick, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM (1:4) and finished even and smooth without using extra cement all as specified & directed

M&L for preparation of new plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of Weather proof exterior emulsion paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coat of Weather proof exterior emulsion paint over coat of primer on brick/ concrete surfaces/plastered surfaces of wall including (i) Use of all scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (ii) Removing of nails, making good holes, cracks etc. (iii) Work in patches and narrow widths, bands, cornices, plasteres etc and cutting in edges to line where necessary. (iv) Spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes. (v) Removing and replacing furniture, moveable cupboard, chicks, blinds etc. (vi) Cleaning of bush, shrubs, vegetation, grass, weed, saplings etc. (vii) Washing floors, cleaning glass, joinery, electric fittings,wiring etc., of drops and splashes and leaving premise, clean and tidy etc. complete all as specified and as directed .

M&L angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F mild steel TMT bars 10 mm and over cut to length, bent to shape required incl. cranking bending spirally for hooping for column hooking ends and binding with and incl. mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Excavation in post hole (or similar holes) each n.exc 0.50 Cum getting out returning filling in and ramming earth around in layers n.exc 25cm watering and removed surplus soil to a distance n.exc 50m and making good surface in any type of soil all as specified and directed.

M&L for PCC Type C-2 (1:3:6) using 40mm graded aggregate as in foundation complete all as specified & directed

Dismantling Chain link fencing any size of type all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire. Complete all as specified and directed.

M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and as directed.

S&F LED flood light 210 or higher watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp die-cast IP 66 aluminum housing , required to fix with existing bracket complete with all accessories incl taking down existing fitting complete all as specified and directed

S&F LED flood light FLTG INT P 400 W resolute a revolutionary design for area lighting applications with less weight and superior performance parameters. An energy saving, enviroment friendly design made of die-cast aluminium with high efficient LEDs as light source. And Light Source high efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficiency of LED> 145 Im/W and viewing angle of 1200 to ensure better uniformity. And Electronic driver, built in IP 67 potted electronic LED driver with AFPC, lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection and other safety test as per IS 15885 Part-2/Sec 13 and CISPR 15 Complied. And housing & Finishing, pressure die-cast aluminium housing (heat sink) for efficient thermal management, strudiness & excellent corrosion resistance, SS 304 Hardness, silicon gasket for maintaining ingress protection. And Mounting, wall or surface mounting using adjustable MS cradle of thickness 4 mm with SS angular dial is provided with the fixture for precise angular mounting of luminaire and building & monuments, parking lots, Sports arenas/ stadiums, General Area illumination, Factories & assembly lines, Toll plazas, Security and perimeter lighting, including connecting the fitting complete all as specified and directed.

Supply, fixing & testing in replacement of UNSV 150W LED Flood light IP66 Powder coated pressure die cast aluminum High power LED street light with heat resistant toughened glass with lens, complete with all accessories duly prewired and suitable fixing arrangement for mounting on existing MS frame/ bracket including connecting the fitting complete all as specified and directed

Supply and fixing LED luminare 600 mm x 600mm , 42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size all as specified and directed

Excavation in trenches in any type of soil not exceeding 1.5 meter deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes etc. including removing cable protection covers/ bricks complete all as specified and directed

Returning, filling in, including spreading leveling, watering and well ramming the excavated soil in layers not exceeding 25 cm thick complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50 Mtr distance and depositing as directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed.

Material & labour for sand filling of 18 CM thick with clean dry fine sand unwashed including gently punning around cables in trenches/ducts for cable protection complete all as specified and directed

S&F for old size sub class `B` bricks, kiln burnt, as in cable protection laid flat with axis of brick perpendicular to the axis of the cable complete all as specified and directed .

Fixing / laying only old retrieved bricks of any description as obtained from dismantling of the cable complete all as specified and directed.

Disconnecting and taking out old unserviceable GI pipe and Supplying, laying & jointing GI water tubing, 50 mm bore, light grade as in sleeving etc laid in trenches / pole post etc, cutting and making necessaries arrangement by means of welding and jointing suitable for post of lantern/ street light fitting including PCC work complete all as specified and directed

Disconnecting and taking out old existing unserviceable/ non- functional LT Cable and Supplying, laying, jointing and testing cable XLPE insulated IS 7098 (Part-I)-1988 marked, screened, PVC sheathed, armored electric power cable (heavy duty) with aluminum conductor for working voltage up to and including 1100 Volts, cross sectional area of under mentioned size of cables laid in trenches/fixed on pole/wall / passed through pipe complete all as specified and directed 10 Sqmm 2 core

16 Sqmm 4 core

M&L in replacement of UNSV cross arms, bracing, supports, clamps and black plates fabricated from structural steel sections including nut, bolts and washer welding, bending cold or hot ,drilling holls for bolts in any shape or size as indicated or directed and inclusive one primer coat one under coat and one finishing coat of paints complete all as specified and directed.

Taking down old unserviceable MS junction boxes from the pole with disconnecting all connections, Supplying and fixing in position new Pole box made of thermoplastic Polycarbonate having IP65/IP66 degree of protection (shock proof, dust proof, jet water proof and acid resistive). The gasket should be internally embedded, and made of Polyeutherene. The boxes shall be tested as per IEC 60670-2/ 60670-22. The boxes shall have self threaded holes & provision for mounting din rail. The lid should be hinged type with sealing screw. The screw should be of stainless steel so that there is no corrosion. The boxes should withstand temperature of -40c to +120c. The glow wire test should be conducted at 960 c or 750 c and material should be flame retardant & self extinguishing. UL subject 94, V-0. The boxes should be free from toxic substances like hal ogen and silicon. The boxes should have suitable pre-molded knock out /or plan wall depending on requirement. Box dimension shall not be less than 200 X 160 X98 MM (LXBXH). Box shall be suitable for 16/25Sqmm cables including one no. MCB SP 230 volts 6 amps and connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminum lugs etc fixed on pole using 30x5mm FI clamps, nuts ,bolts & washers complete all as specified and directed

Material & labour of PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in mass concrete and filling complete for foundation/hard standing all as specified & directed.

M & L for cutting chases in hard standing road/path/drain etc for passing cables/pipes etc. size of cutting 100mm wide and 200mm deep and removing the excavated materials and disposal at 50 meter distance and making good the cutting after the pipe and cables are laid with PCC (1:3:6) type C-1 using 20mm graded stone aggregates complete all as specified and directed.

Supplying, erecting and fixing in replacement of UNSV steel tubular swaged pole (410 SP – 31), 9 mtr long, in true vertical position complete conforming to IS : 2713 (Part-I & III) 1980 with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole with and including 2 coats of black bituminous paint externally up to planting depth and remaining exterior portion of pole finished with one coat of red oxide primer complete, all as specified and directed

M&L in replacement UNSV of sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 2.5 Sqmm of voltage rating up to and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 20 mm dia with standard accessories along-with one run of PVC (green colour) insulated , unsheathed, stranded copper conductor of size 1.5Sqmm as earth continuity conductor complete all as specified and directed.

S & F in replacement of unserviceable MCB 40 Amps,TP 415 volts, short circuit breaking capacity,Icn 10 kA, 'C' Curve suitable for fixing in existing MCB DB/LT Panel complete all as specified and directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (1991) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed

Material and labour for cleaning and preparation of all existing steel surfaces of straight Electric/ steel tubular poles 9/11 mtrs long for painting including mild steel cross arms, clamps and street light brackets, protection pipe, MS boxes etc and applying Two coat of aluminum paint all round the exposed steel surfaces of existing steel tubular poles of any description and in any position above the height of 1.50 mtr from the plinth of the pole and applying one coat of synthetic enameled paint of different colours in strips of 150mm width up to the height 1.5 mtr from the plinth of pole complete all as specified and directed.

G M CONSTRUCTION COMPANY

J P CONSTRUCTION

HARJINDER PAL SINGH