SPECIAL REPAIRS TO BUILDING NO P-177 AT SMA NAVAL BASE KOCHI

Amount

Taking down door chowkats (wooden/steel/PVC) with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) ,all as specified and as directed.

Taking down shutters with frame n exc 1.5 Sqm (without taking off shutters from the frame) ,all as specified and as directed.

Taking down shutters of any description n exc 1Sqm ,all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but nex 2 sqm ,all as specified and as directed.

S&F 2nd class hard wood solid striaght chowkhats & door frames, rebated on the solid, rounded or chamferred put together with glue pinned at joints complete all as specified and as directed.

S&F 2nd class hard wood, 35mm thick factory made door shutters plain framed, panelled shutter with lock rail and panel of 12mm thick veneered water proof particle board the size of rails and stile as per IS -1003 klin seasoned and chemically pressure traeted complete all as specified and as directed.

S&F Second class HW 35 thick Glazed skelton shutters open rebated and prepared to recive gauze (with out sash bar),edges of framing plain,chamfered or rounded,fitted with cut or mitred beads for securing glass , etc fixed to chowkhats all as specified and as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as specified and as directed.

S & F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in openings all as specified and as directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, & fixing in the frame at site as specified.

M&L19 mm thick pre laminated particle board exterior grade one side with decorative choice lamination & other side balancing white lamination fixed with nails and screws including external teak wood lipping 6mm thick fixed with headless nails all as specified and as directed.

M&l second class HW plain fillets square or rectangular in section area exeeding 13 sqcm not exeeding 25 square cm fixed with screws fixed with screws all as specified and as directed.

S&F mild steel work in hold fasts etc and similar small articles confirming to Fe-290 Gde E 165 fixed in plain cement concrete 1:2:4 type B1 using (20mm graded crushed stone aggregate) including treating with tar or coal tar black paint complete all as specified and as directed

S&F Stainless steel butt hinges 100mm , heavy weight, cold rolled mild steel, complete all as specified and as directed

S&F 150mm size aluminium handle (ISI Marked) cast type anodized, complete all as specified and directed.

M&L for 150mm size aluminium tower bolt (ISI Marked) anodized, complete all as specified and directed.

S&F Floor door stopper of Aluminium alloy body and tongue , anodised with hard drawn steel spring, fixed in steel (overall length of cover plate 140mm) complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F powder coated anodised aluminium frame windows, ventilator with one or more rebates including joining cleat for fixing etc. complete (Sliding type/Side hung type)

S&F for powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed.

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S & F sheet glasses, plain 4.00mm thick glazing all with glazing clip & rubber gaskets etc exc 0.5 sqm in each pane complete all as specified and directed.

S & F sheet glasses pin head type, 4.0mm thick glazing all with aluminum beading, glazing pin etc n exc 0.5 sqm in each pane complete all as specified and directed.

S& F Aluminium deco grill fixed with windows with all fittings as directed by Engr -in- charge complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the permises complete all as specified.

M& L for Glazed ceramic tiles in vertical surface 600 x300x8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick on fair face of brick work or concree surface in CM 1:6 s finished to receive tiles complete all as specified and directed.

M&L Anti skid jointless rectified ceramic tileof size 400x400 8mm thick over cement screed 10mm thick in CM 1:4 wirth WPC etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Rectified Ceramic tiles of size 600X600 X 8-9 mm thickness with approved Pattern over cement sreed 10mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item No.30 above but as in skirting over cement screed 10mm thick in CM 1:3 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of cement concrete unreinforced in any Position not otherwise specifically provided for etc complete all as specified and directed.

M&L 75mm thick PCC Type CI 1:3:6 (20mm graded stone agg) as in plith protection finished even and smooth without using extra cement etc complete all as specified and directed.

M&L Mirror Polished kota stone slab (in single piece) flooring 20-25mm thick bullnosed over cement screed base in CM 1:6 ,20mm thick , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed.

M&L Mirror polishied Kota stone slab 20-25mm thick ( in single piece) in riser of steps, skirting, dado and pillar laid over and including cement plastering in CM 1:4,10 mm thick ,and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed.

Demolition of stone slabs of any description or thickness laid bedded in any motar complete all as specified and directed.

M & L for 18-20mm thick granite stone slab( Jet black )over cement screed 15mm thick in CM 1:4 over 25mm thick PCC type Bo 1:2:4 (using 12.5 mm graded stone aggregate ) as levelling course over RCC Slab complete all as specified and directed .

Dismantling wrought iron or mild steel work of any descrip[tion not otherwise provided complete all as specified and as directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe - 290 Gde E-165. complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for cement Plaser in two coats 8mm thick in CM 1:4 using WPC over 12mm thick in CM (1:6) on external surfaces is to be finished even smooth with out using extra cement with using approved WPC complete all as specified and as directed.

M&L for rendering 10 mm thick internal cement plaster in CM 1:6 on fair faces of brickwork or concrete surfaces is to be finished even smooth with out using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick cement plaster in CM 1:3 on fair faces of brickwork or concrete ceiling surfaces on ceiling , finished even smooth with out using extra cement complete all as specified and as directed.

Supply only Integral waterproofing compound (ISI marked), all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying 3mm thick wall care putty as preparatory to distempering & applying two coats of distemper oil emulsion , over a coat of alkali resistant primer all as specified and as directed. Note : Painting shall be done through authourised applicator of paint manufacturer.

M&L complete removal of existing treatment by scouring, washing down with water jet on internal surfaces of walls, and applying 3mm thick wall care putty as preparatory to distempering & applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified and as directed Note : Painting shall be done through authourised applicator of paint manufacturer.

M&L for preparation of newly plastered ceiling surface and applying 3mm thick wall care putty as preparatory to distempering & applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified and as directed. Note : Painting shall be done through authourised applicator of paint manufacturer.

M & L complete removal of existing treatment from ceiling surface and applying 3mm thick wall care putty as preparatory to distempering & applying two coats of distemper oil emulsion ,over a coat of alkali resistant primer all as specified and as directed.Note : Painting shall be done through authourised applicator of paint manufacturer.

M&L complete removal of existing treatment of old external wall surfaces by scoring, washing down with water jet and applying two coats of Apex Ultima Protek of Asian paint or equivalent of Berger/Nerolac/Dulux over a coat of anti fungal primer duly applied through authorised company applicator using modern tools and techniques of approved make complete all as specified and as directed.

M&L Preparation of old painted wooden surface of any description over 10cm in girth/width and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10cm in girth/width and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of anti corrosive synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L Preparation of old or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of anti corrocive synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Taking down tar felt (water proofing treatement) on roof slab incl cleaning and removing tar felt material and disposing to a distance of exc 250m not exc 500 m complete all as specified

M/L screed bed or bedding layer of mortar 15mm in CM 1:4 (using WPC) for laying floor finishes etc complete all as specified and directed.

M&L for applying oil based bitumenous primer @ 0.20Kg/Sqm provided and laying 4mm thick APP modified water proofing membrane weighing not less than 4Kg/Sqm reinforced with non woven polyster matt weighing not less than 160gm/Sqm having softening point not less than 650N/Sqm, tearing strength of 180N/Torque application including minimum 10cm side overlap and 15cm end laps applying a coat of blown grade hot bitumen 85/25 over the membrane 1.20Kg/Sqm finishing with solar reflective bitumenous based aluminium paint @ 0.10Kg/Sqm complete all as specified and as directed.

M&L for Antitermite post costruction treatment along the external wall below concrete or masonry using chemical emulsion @2.25/linear meter including pluging holes etc complete all as specified and as directed.

M&L for Antitermite post costruction treatment under existing floors using emulsion one litre /hole300mm apart including drilling along external wall below including pluging holes 12 mm dia holes with CM1:2 to match the existing floors complete all as specified and as directed.

M&L for Antitermite post costruction treatment of voids in masonary using chemical emulsion one litre/ hole at 300mm interval incuding drilling hole at 45 degree and replugging them with motar 1:2 to match existing floor complete all as specified and as directed. .

Antitermite post costruction treatment at all points of contact of wood work by chemical emulsion @0.5litre/ hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples,including taking down old wire cloth complete all as specified and directed.

S&F pillar taps, cast copper alloy with capstan heads , Chromium plated screwed down high pressure with or without lettered "Hot " or "cold" with long screwed shanks and fly nuts , screwed for iron pipes complete all as specified and directed.

S&F in repairs stop valves cast copper alloy with crutch or butterfly handle , screwed down , screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs Vitreous china wash basin white size (450 x 300mm) flat back or angle back type but including brackets , including cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F PVC Connection 15mm bore 45cm long with brass coupling complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet Squating pan Orissa pattern size 580x440mm white with integral foot rests ( Excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F in repairs soap dish vitreous china coloured approx size 160 x 160x90mm recessed type fixed to plugs with CP brass screws complete all as specified and directed.

S&F in repairs CP brass towel rail 60 cm long fixed complete all as specified and as directed.

S&F in repair sink with drain board made of S/S 1 mm thick kitchen or laboratary with plugs washers,including bedding in cement mortar on to dwarf wall or including cantilever brackets and connecting union to pipe over all size 495mmx420mm bowl size 410mmx330mm x160mm with waste coupling 32mm bore dia of discharge pipe of PTMT complete all as specified and as directed.

S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Min wt- 190gms) complete all as specified and as directed.

S/F PVC valve less,low level flushing cistern ,10 ltr capacity,white symphonic action with inlet, ball valve, float and handle including flush pipe and brackets complete all as specified and as directed.

Demolition of 100mm AC or reinforeced concrete drain pipes, jointed in cement mortar and taking out of wall complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm dia single socketed in any length , with rubber rings complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber rings complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) 110 mm dia vent cowl complete all as specified and as directed.

S&F PVC (SWR) 75 mm dia vent cowl complete all as specified and as directed.

S&F PVC Nahani Trap 75mm (SWR) floor trap, plain with grating including jointing with solvent or cement complete all as specified and as directed.

S & F 110mm dia PVC (SWR) T single junction with access door complete all as specified and as directed.

S & F 75 mm dia PVC (SWR) T single junction with access door complete all as specified and as directed.

S & F 75mm dia ( SWR) branch piece single ( single' Y') equal or un equal complete all as specified and as directed. .

S&F Grating round 140mm size of PTMT (Min Wt-50 gms) complete all as specified and as directed.

S&F in repairs stain less steel plate rack of size 1.00m x1.2m x 0.20m ,complete all as specified and as directed.

Supply and lay in trenches low density polythylene pipes (LDPE) 32mm of pressure rating 6kg/cm2 , complete all as specified and as directed.

S&F waste coupling of PTMT with discharge pipe bore dia of 32mm( half or full threaded) Minimum wt 32mm-45 gms , complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:3 or concrete surface or brick surface to sunken floor with 3% WPC ,finished even and smooth and applying 2 coat bitumen grade 85/25 applied hot to concrete surface at rate of 1.5 kg per sqm per coat etc complete all as specified and as directed.

M&L APP based polymeric membrance minimum weighing 3 Kg/ Sqm & minimum 3 mm thickness reinforced with polyster non woven fabric (wt not less than 150 gms/ sqm) land on primed surface by forced application complete all as specified and as directed.(Make: BASF/Fosroc/IWL/ STP Ltd)

M & L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 50mm thick in sunken floor of toilet/bathroom finished even and smooth with out extra cement etc complete all as specified and as directed.

M&L for PCC type E2 1:5:10 (40mm stone aggregate) in sunken floor of toilet/bathroom finished fair and even etc complete all as specified and as directed.

M&L for 50 mm dia UPVC pipe of pressure rate 10kgf/cm2 as water spout in sunken floor complete all as specified and as directed.

S& F in repair 25mm dia aluminium Powder coated decorative curtain rods complete all as specified and directed.

S& F in repair decorative bracket for curtain rods of 25mm dia complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of Appex Ultima Proteck of Asian paint or equivalent of Berger /Nerolac/ Dulex over a coat of anti-fungal primer duly applied through authorised applicator of approved make,using modern tooles and techniques of approved make complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors,etc complete all as specified and directed.

M&L , point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLSH cable 1100 Volts grade ISI-694 marked with valid CML No. single core multistranded cable in and including medium grade concealed PVC conduit not less than 20mm dia and accessories ISI marked with valid CML No (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and including 2 mm thick MS sheet/ pressed steel sunken boxes depth not less than 50mm (earth dolly) duly painted with two coats of anti corrosive paint / aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paints over a coat of red oxide primer externally covered with 3 mm thick plastic laminated sheet cover for fixing of switches sockets and fan regulators etc. including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLSH cable single core multistranded cable as earth continuity wire for one light controlled by one ,one way switch 5 Amp , all as specified and as directed.

All as per item No 97 here -in -before but for One fan /exhaust fan point controlled by one ,one way switch and regulator complete all as specified and directed.

All as per item No 97 here- in- before but for for One bell/ buzzer point controlled by one push button complete all as specified and directed.

All as per item No 97 here- in- before but for for but for One light point controlled by two way switches complete all as specified and directed.

All as per item No 97 here in before but one 5 pin 5 amps socket outlet on independent board complete all as specified and directed.

All as per item No 97 here in before but one 5 pin 5 amps socket outlet on same board complete all as specified and directed.

All as per item No 97 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board complete all as specified and directed.

S&F switch piano flush type 5A one way with cover plate all as specified and directed .

S&F Bell push, flush type, 5 amp one way with cover plate all as specified and directed .

S&F switch piano flush type 6A two way with cover plate all as specified and directed .

S&F S/S combination 5 pin 5 Amps flush type with cover plate all as specified and directed .

S&F S/S combination 6 pin 15 Amps flush type multi purpose with cover plate all as specified and directed .

S&F fan regulator electronic socket step type with cover plate all as specified and directed .

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals all as specified and directed .

S & F 75 mm dia PVC (SWR) T single junction with access door complete all as specified and as directed.

Supply & fix in repair ceiling fans complete without regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated,including numbering of of fans and taking down/out old unserviceable fan and deposit with MES store yard .all as specified and directed .

Supply & fix in repair exhaust fans Metelic body AC single phase 230/ 240 V of size 300 mm sweep with louver including numbering of fans and taking out old unserviceable fan deposit with MES store Yard .all as specified and directed .

S&F Buzzer, Ding Dong AC. 230 volts, single pole all as specified and as directed.

Supply & fix in repair LED bulk head ,10 W,240 volt all as specified and as directed .

S&F in repair 07 W LED mirror light fitting with tube and provided with high output diffuser including all electrical connection all as specified and dirceted by Engineer in charge.Cat part no LCL-07-CDL of crompton / Philips/Wipro

Supply and fix LED Tubelight fitting 1 x20 w ,high efficiency and robust industrial batten suitable for surface,wall including all connection all as specified and as directed.Cat part no BN308C LED20S-6500 L60 PSU WH of Philips,CIS-305-40-57-SL-DP-NWH Of Crompton,LPRD01X020XC OF Jaguar .

S&F in repair Decorative wall light fixture made up of polycarbonate ,suatable for B-22 base ,unbreakable fixed on wall including all connection all as specified and directed by engineer in charge . Make -Havells Cat part no LHFOFUE1TZ1W012 /Philips / Wipro.

S&F in repair lamp holder ,PVC /poly carbonate type with cord grip for batten fitting all connection all as specified and directed.

S&F LED bulb 10 Watt ,B-22 (cool day light ) all as specified and directed. Make Havells Cat part no -LHLDEUHEML8R010 / crompton / Philips/Wipro

Supply and fix LED street light 35/36 W IP 65 protection including all accessories and suitable GI pipe for fixing on wall including all connection all as specified and dirceted by Engineer in charge. Make: Cat Part No:LSTS-36-CDL-M of Crompton/Philips/Luker

S&F in repair Sheet metal enclosure SPN DB when MCB's to be used 8 way with 200 amps bus bar double door all as specified and dirceted .

S&F in repair MCB SPN upto 32 A, 240 volt ,50 Hz all as specified and directed . Make :- Cat part no -DCMJCSNF006-032 of Havells /Indoasian ,L&T .

S&F in repair MCB SP upto 32A 240 volt ,50 Hz all as specified and directed . Make :- Cat part no -DCMJCSPF006-032 of havells / Indoasian ,L&T .

M&L for sub main wiring with 2 runs of 6 Sqmm PVC insulated FRLSH copper conductor multistranded cable drawn in and including concealed PVC conduit including one run of 6 Sqmm multi stranded copper conductor cable for earth condinuity wire including taking down old submain wiring all as specified and as directed. Note : Two runs of PVC cable 6 sqmm and one run of 6 sqmm earth condinuity conductor cable as earth continuity wire and pvc conduit will be measured as one unit length.

Taking down electric energy meter and keep in safe custody and refixing the same as including necessary electric connection from main to electric energy meter and electric energy meter to out going distribution board.

Supply & fix stop valve (angle type) cast copper alloy high pressure,screwed for 15mm dia CP fancy type including taking down old fitting all as specified and as directed

Supply & fix of concealed stop cock with sliding flange CP fancy type of size 15mm including taking down old fitting all as specified and as directed

Supply & fix of bib cock chromium plated with flange and aerator CP fancy type of size 15mm including taking down old fitting all as specified and as directed

Supply & fixing of swivel shower of PTMT any colour with shower arm 15 mm size,195mm long with bend of 45 degree with flange of PTMT including taking down old fitting all as specified and as directed

Supply & fixing of low density polythene pipe 16mm dia (outer),450 mm long for cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe all as specified and as directed.

S&F on wall / ceiling (concealed) CPVC pipe 32mm dia SDR 11 & plain SDR 11 fittings including taking down old pipe all as specified and as directed

S&F on wall / ceiling (concealed) CPVC pipe 25 mm dia SDR 11 & plain SDR 11 fittings including taking down old pipe all as specified and as directed

S&F on wall / ceiling (concealed) CPVC pipe 20 mm dia SDR 11 & plain SDR 11 fittings including taking down old pipe all as specified and as directed

Supply and fix in repairs Ball brass valves (PTMT) of size 32 mm dia high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed all as specified and as directed.

M&L for fixing aluminium strip 25x3.15mm with porelain insulators,saddles and fixing screws etc for roof conductor and aluminium conductor above ground including takingtaking down old strip all as specified and directed

M&L for air termination single pointed aluminium rod 12mm dia and 30mm long including taking down old air termination rod all as specified and as directed

M&L for test point terminal block made of gunmetal of size 75x75x25mm drilled and screened including 3Nos 8mm dia 25mm long hexagonal headed screws including taking down old test point terminal block all as specified and as directed .

M&L for fixing on wall/ burried in ground 32x6mm galvanised iron strip with saddles and screws etc complete including taking down old GI strip all as specified and directed

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mmx6 mm thick burried directly in ground(earth pit not less than 2.25 metrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below ground level connected to galvanized iorn strip 32 x 6mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron steel all shown in electric plate No 5 of SSR Part-I connected to earthing test pit all as specified or indicated including provn of necessery excavation and earth work in any type of soil, PCC pit ,RCC cover and frame, 20 mm bore medium grade watering pipe , water funnel, 40 mm bore GI medium grade protection pipe , common salt, charcol dust,returning, filling in of soil, removal of soil to a distance not exceding 50 mtr etc including testing on completion complete all as specified.

MS BUILDERS

Oriental Constructions

SUKU CONSTRUCTIONS