SPL REPAIR OF FIRST FLOOR AND BATHROOMS BLOCK (GF AND FF) TO BLDG NO. P-217 AT ARMY AREA JODHPUR UNDER GE (ARMY) NO. 01

Amount

Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level) and removing debris out of MOD land complete all as specified and directed by Engr in charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr in charge.

M&L for 25 mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) to receive floor finishes etc complete all as specified and directed by Engr in charge.

M&L for 15-18mm thick Udaipur green marble machine cut in cooking platform, window cill, door cill laid over 10mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing and rounding the edges complete all as specified and directed by Engr in charge.

M & L for 18-20 mm thick Black granite stone as in cooking platforms ,counter slab, slabs for WHB,sinks etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete including pointingin white cement (1:2) using marble dust with admixture of pigment to match with shade of granite& providing necessary holes for gas pipe / water supply pipes etc complete all as specified and directed by Engr in charge.

M&L for Vetrified double/single charged Ceramic tiles 9-10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) complete all as specified and directed by Engr in charge.

Ditto, but on vertical surface as skirting incl 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE, complete all as specified and as directed by Engr-in-Charge.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 15mm thick rendering in CM (1:6) on vertical surfaces as in dado (colour and pattern as approved by GE) complete all as specified and directed by Engr in charge.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor etc over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed by Engr in charge.

M&L for Ceramic tiles 9-10 mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.16 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) complete all as specified and directed by Engr in charge.

Ditto, but on vertical surface as skirting incl 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE, complete all as specified and directed by Engr in charge.

M&L of 18-20mm thick machine cut KOTA stone slab as in floor (size not less than 580mm x 580mm) , treads, steps etc(Single piece for steps), machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing all as specified as in floors over and including 15mm thick in screed bed in CM (1:6) complete all as specified and directed by Engr in charge.

M&L of 18-20mm thick machine cut KOTA stone slab riser of step , skirting, dado etc(Single piece for steps), machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing all as specified including backing coat of 10mm thick in CM (1:4) complete all as specified and directed by Engr in charge.

M&L for 15-18 mm thick Yellow Jaislmer stone as in floor,stair case etc as specified over and including 15mm thick in screed bed in CM (1:6) and in risers/skirtings etc laid over 10 mm thick rendering in CM 1:3 complete incl mirror polishing complete all as specified and directed by Engr in charge.

Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water complete all as specified and directed by Engr in charge.

M&L for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement complete all as specified and directed by Engr in charge.

M&L Rendering 10 mm thick in CM (1:4) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete all as specified and directed by Engr in charge.

Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar complete all as specified and directed by Engr in charge.

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 complete all as specified and directed by Engr in charge.

M/L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper including 2 coat of wall care putty complete all as specified and directed by Engr in charge.

M&L for preparation of old surfaces of wall including complete removal of existing treatment brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and surface even and applying two coat of oil bound distemper over one coat of primer complete all as specified and directed by Engr in charge.

M/L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper including 2 coat of wall care putty complete all as specified and directed by Engr in charge.

M/L for preparation of old plastered surfaces of ceiling and applying two coats of oil bound distemper including 2 coat of wall care putty complete all as specified and directed by Engr in charge.

M&L for three coats of white wash including preparation of new/old surfaces on walls complete all as specified and directed by Engr in charge.

M&L for three coats of white wash including preparation of new surfaces as on ceilings complete all as specified and directed by Engr in charge.

M&L for one coat of white wash including preparation of old surfaces as on ceilings complete all as specified and directed by Engr in charge.

M&L for two coat of cement based paint on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation complete all as specified and directed by Engr in charge.

M&L for one coat cement based paint on old plastered/ unplastered surfaces of wall & including preparation complete all as specified and directed by Engr in charge.

Taking down chowkat with shutters (without taking off shutter from frame) size area n.exc1.50 sqm each complete all as specified and directed by Engr in charge.

Taking down chowkat with shutters (without taking off shutter from frame) size area exc 1.5sqm but n.exc4.0 sqm each complete all as specified and directed by Engr in charge.

M/L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in bed block for hold fast including necessary form work complete all as specified and directed by Engr in charge.

Taking down steel window and ventilators (glazed/fly proof) of any discreption complete all as specified and directed by Engr in charge.

S&F factory box type windows (steel) (BWM) with side hung shutter with cooler opening as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr in charge. Note:- (a) Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same. (b) Guard bar, glass, wire cloth and painting shall be measured & paid separately.

S&F factory box type windows (steel) (BWM) with side hung shutter with cooler opening as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete without glazing bars, dovetailed or welded complete all as specified and directed by Engr in charge. Note:- (a) Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same. (b) Guard bar, glass, wire cloth and painting shall be measured & paid separately.

S&F factory box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr in charge. Note:- (a) Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same. (b) Guard bar, glass, wire cloth and painting shall be measured & paid separately.

S&F factory box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete without glazing bars, dovetailed or welded complete all as specified and directed by Engr in charge. Note:- (a) Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same. (b) Guard bar, glass, wire cloth and painting shall be measured & paid separately.

S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, complete all as specified and directed by Engr in charge.

S&F of box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete without glazing bars, complete all as specified and directed by Engr in charge.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr in charge.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents & door shutters with aluminum wire staples etc complete all as specified and directed by Engr in charge.

S&F Factory single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed by Engr in charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M & L for pressed steel door frames (105X60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, PCC etc, complete all as specified and directed by Engr in charge.

M & L for pressed steel door frames (165X60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, PCC etc, complete all as specified and directed by Engr in charge.

S&F Factory single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr in charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) .

S &F of factory 35 mm thick 2nd classhard wood Plain framed, panelled shutter (two panel/single panelled) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed by Engr in charge.

S & F 35mm thick factory second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009section 8 clause 8.24 (a) complete all as specified and directed by Engr in charge.

S&F Anodised aluminium frame powder coated for doors, windows ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed by Engr in charge.

S&F Anodised aluminium door/window shutters powder coating of any colour (Thickness of powder coating not less than 50 micron) , aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr in charge.

M&L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators and partation including providing and fixing hinges/ pivots and provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief.

M&L for Pre- powder coated (powder coating min 50 micron) aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators,complete all as specified and directed by Engr in charge.

S&F 5.5 mm thick tinted black/white glass exc 0.5 sqm each pane complete fixed to aluminium frame work including rubber beading complete all as specified and directed by Engr in charge.

S&F in repairs of Double action floor spring hydraulically regulated of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot of brass, other parts of mild steel heavy duty & fixed complete all as specified and directed by Engr in charge.

S&F in repairs mortice latch with two levers (Vertical type) mild steel body 100mm long and fixed complete all as specified and directed by Engr in charge.

M&L for Powder coated Aluminium tower bolt 75 mm size fixed to aluminium windows , door complete all as specified and directed by Engr in charge.

M&L for for 75 mm size powder coated aluminium handle fixed to Al windows complete all as specified and directed by Engr in charge.

M&L for 100mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the steel cupboard, kitchen cabinet shutters etc, complete all as specified and directed by Engr in charge.

S & F in repair Mortice lock 2 levers vertical type mild steel body size 75 mm with a set of 2 keys complete fixed as in repairs to Steel Built in Cupboards complete all as specified and directed by Engr in charge.

S&F of stainless steel butt hinges medium weight 100mm size, include screws or bolts, nuts and washers to match the butt hinge, complete all as specified and directed by Engr in charge.

S &F of mild steel butt hinges medium weight, cold rolled of size 100 mm size complete all as specified and directed by Engr in charge.

S&F 200mm long aluminium anodised tower bolt complete all as specified and directed by Engr in charge.

S&F 150mm long aluminium anodised handle extruded section complete all as specified and directed by Engr in charge.

S & F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet,cast orextruded sections& fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr in charge.

S&F 150 mm double action spring hinge, brass with phosphor bronze wire spring bright polished complete all as specified complete all as specified and directed by Engr in charge.

S&F in repairs 50 mm size best quality double/single door stopper of aluminium alloy body and tongue, anodised & hard rubber shoe all as per sample complete all as specified and directed by Engr in charge.

Hacking out old broken glass (any thickness , size , quality or description ) from metal frame incld punching or drilling out old glazing pins /spring clips and provding and fixing new ones complete all as specified and directed by Engr in charge.

S&F for 3 mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane complete all as specified and directed by Engr in charge.

S&F for 4 mm thick figured , pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane complete all as specified and directed by Engr in charge.

M & L for prep of the new surfaces of steel & applying two coats of syn enamel paint over one coat of red oxide primer over 10Cm width or girth complete all as specified and directed by Engr in charge.

M&L for one coat of synthetic enamel paint on old steel surface including preparation of surface, over 10Cm width or girth complete all as specified and directed by Engr in charge.

M&L for two coat of synthetic enamel paint over a coat of pink primer on new wooden surface including preparation of surface, over 10Cm width or girth complete all as specified and directed by Engr in charge.

Taking up or down GI steel /CPVC water tubing 15/ 20 mm bore and connection, including cleaning for refixing or remove to site complete all as specified and directed by Engr in charge.

Taking up or down GI tubing/CPVC 25 mm bore and connection, including cleaning for refixing or remove to site complete all as specified and directed by Engr in charge.

Supply & Fixing CPVC tubing having outer dia 20mm SDR-11 Including all fitting (eblow, socket,tee with internal thread of brass) fixed on wall, ceiling or laid to floor complete all as specified and directed by Engr in charge.

Supply & Fixing CPVC tubing having outer dia 25mm SDR-11 Including all fitting (eblow, socket,tee with internal thread of brass) fixed on wall, ceiling or laid to floor complete all as specified and directed by Engr in charge.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth in brick wall complete all as specified and directed by Engr in charge.

S&F in repair of bib cock 15mm dia, cast copper alloy fancy type, screwed for iron pipe or for brass ferrule all as specified complete all as specified and directed by Engr in charge.

S&F in repair Brass 15mm CP wall mixer for mixing hot & cold water screwed on wall of iron pipe and fixed complete all as specified and directed by Engr in charge.

S&F in repair Fancy type Chromium plated shower roses 125mm size with arm, with or without swivel joints, 15mm bore, including fixing to steel pipe or union complete all as specified and directed by Engr in charge.

S&F in repairs angular stop valves cast copper alloy chromium plated(ISI marked) screwed down high pressure fancy type screwed both ends for 15mm bore of iron pipe or union complete all as specified and directed by Engr in charge.

S&F stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for 20/ 25mm bore of iron pipe or union and fixed in repair complete all as specified and directed by Engr in charge.

S&F in replacement of swan neck Pillar taps 15mm bore , cast copper alloy, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed by Engr in charge.

S&F in repairs two way angle bib cock chromium plated brass body, (Nickel 10 microns and chrome 0.3 microns) fancy type 15 mm bore /size, complete all as specified and directed by Engr in charge.

M&L for 6 mm thick bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers etc complete all as specified and directed by Engr in charge.

M&L for 75mm outlet diameter UPVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate complete all as specified and directed by Engr in charge.

M&L for 110 mm outlet diameter UPVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate complete all as specified and directed by Engr in charge.

S&F tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as directed complete all as specified and directed by Engr in charge.

S&F in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end (As approved by Engr -in-charge) complete all as specified and directed by Engr in charge.

S&F in repair of Vitreous China wash basin size 450 x 300mm with/without padestal, white, flat back, including 32 mm CP waste coupling, waste pipe, PVC Connection 300 mm long, brackets complete all as specified and directed by Engr in charge.

S&F in repair of vetrious china wash basin white circular/ovel type including brackets, 32mm bore CP coupling etc complete all as specified and directed by Engr in charge.

S&F in repair Vitreous China wash down water closet pan ( EWC), white with fixing bolts (excluding , flushing cistern and flush pipe)and cast iron `P' or `S' trap front or back fixed in repairs Including connection to trap etc and provision of cement concrete bedding and good to floor complete all as specified and directed by Engr in charge.

S&F in repair vitreous china squatting Pan, Orissa Pattern of size 580X440mm white with integral foot rests and cast iron `P' or `S' trap front or back fixed in repairs Including connection to trap etc and provision of cement concrete bedding and good to floor complete all as specified and directed by Engr in charge.

S & F Vitreous China urinals fancy type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brassscrews, pointing around urinal back in cement; complete all as specified and directed by Engr in charge.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed by Engr in charge.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed by Engr in charge.

S&F Toilet paper holder, vitreous China, box type coloured complete all as specified and directed by Engr in charge.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 100/110mm bore, complete all as specified and directed by Engr in charge.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as specified and directed by Engr in charge.

Supplying and laying of 75 mm dia UPVC pipes SWR & Plain UPVC SDR 11 fittings in trenches complete all as specified and directed by Engr in charge.(with all fitting)

Supplying and laying of 110 mm dia UPVC pipes SWR & Plain UPVC SDR 11 fittings in trenches complete all as specified and directed by Engr in charge. (with all fitting)

Supplying and laying of 75 mm dia UPVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified and directed by Engr in charge. (with all fitting)

Supplying and laying of 110 mm dia CPVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified and directed by Engr in charge. (with all fitting)

S&F 75 mm bore UPVC bends any radius with oval acess door complete all as specified and directed by Engr in charge.

S&F 110 mm bore UPVC bends any radius with oval acess door complete all as specified and directed by Engr in charge.

S&F for 110 mm dia UPVC cowls, diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engr in charge.

Supply and fixing in repair PVC valve less symphonic action type flushing cistern 10 ltrs capacity low level with inlet, ball valve, float and handle Including bracket fixed and complete all as specified and directed by Engr in charge.

S&F 32mm bore low or high density polyethylene waste pipes (LDPE) of pressure rating 6Kg/Sqm fixed complete to walls, ceiling or floors etc complete all as specified and directed by Engr in charge.

S&F in repair 15mm bore PVC connection (for Flushing cistern) 600mm long best quality with PTMT nuts complete all as specified and directed by Engr in charge.

S&F in replacement Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) , 15mm dia complete all as specified and directed by Engr in charge.

S&F in repair PVC Jet with flexible tube complete all as specified and directed by Engr in charge.

S & F in repairs CP mild steel grating 100mm dia, including jointing with solvent cement complete all as specified and directed by Engr in charge.

S & F in repairs CP mild steel grating 75mm dia, including jointing with solvent cement complete all as specified and directed by Engr in charge.

S&F in repair MS chromium plated peg set of five pegs fixing with wall complete all as specified and directed by Engr in charge.

S&F for Soap dish, vitreous China white, ap?proximate size 160x 160x90mm complete all as specified and directed by Engr in charge.

Dismantling existing water tank of capacity exceeding 250ltrs and not exc 1000 ltrs and removing from site complete all as specified and directed by Engr in charge.

S&F rotational moulded polyethylene water storage tank ISI Marked (cylindrical vertical with closed top) white, hoisted and fixed in position all as directed of capacity 500 ltrs a Including 20mm bore brass ball valve high pressure with polythene float complete all as specified and directed by Engr in charge.

S&F rotational moulded polyethylene water storage tank ISI Marked (cylindrical vertical with closed top) white, hoisted and fixed in position all as directed of capacity 1000 ltrs a Including 20mm bore brass ball valve high pressure with polythene float complete all as specified and directed by Engr in charge.

Demolition of reinforced cement concrete including cutting to reinforcement as required to facilitte demolition as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, chimneys and similar suspended work complete all as specified and directed by Engr in charge.

M&L for 7.5cms thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4, complete all as specified and directed by Engr in charge.

M&L 40 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in floor , hard standing flooring finished even and smooth without using extra cement complete all as specified and directed by Engr in charge.

M&L 50 mm thick PCC (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection finished complete including forming joints in 2 mtr interval and filled with bitumen mastic complete all as specified and directed by Engr in charge.

Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, padding,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing the same to the places where as directed complete all as specified and directed by Engr in charge.

M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and directed by Engr in charge. : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.

Supply only integral water proofing compound (ISI marked), complete all as specified and directed by Engr in charge.

M&L for fixing of 0.50 mm thick Aluninium coated Sheet cut to size bent to shape as in covering over crumple joints fixed with screws & bitumen washer complete all as specified and directed by Engr in charge.

Demolition of stone masonry /block walling built in cement mortar complete all as specified and directed by Engr in charge.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engr in charge.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified and directed by Engr in charge.

M&L for precast cement concrete solid building blocks type B1 1:2:4 (20mm graded stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in 1:4 cement mortar, complete all as specified and directed by Engr in charge.

M&L for Providing and laying at or near ground level factory kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including drainage opening wherever required etc. complete all as specified and directed by Engr in charge.

M&L 75 mm thick PCC (1:4:8) type D2 using 40mm gradded stone aggregate as in sub base complete all as specified and directed by Engr in charge.

Providing and laying 60mm thick factory chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr in charge.

M&L for providing precast cement concrete type B-1 1:2:4 (using 20mm graded stone agg) as in kerb stone etc (of any section as approved) with plain faces , including chamfers,weathering,throating etc and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed by Engr in charge.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete all as specified and directed by Engr in charge.

M&L for fixing MS 12 mm dia TMT bars by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc complete all as specified and directed by Engr in charge.

M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of RUSTOFF to remove the loose rust particles etc & throughly cleaning the surface complete all as specified and directed by Engr in charge.

M&L for applying a coat of bond coat with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack complete all as specified and directed by Engr in charge.

M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat complete all as specified and directed by Engr in charge.

M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth without using extra cement complete all as specified and directed by Engr in charge.

S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc complete all as specified and directed by Engr in charge.

M&L for Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified and directed by Engr in charge.

Excavation in trenches not exc 1.50m wide and not exc 1.50m depth and getting out in soft/loose soil ext complete all as specified and directed by Engr in charge.

S&F 150mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed by Engr in charge.

M&L for cement concret (1:3:6) type C-2, using 40mm graded stone aggregate bed to drain pipe 150 mm dia including packing under and hunching against the pipe after they are laid including necessary formwork complete all as specified and directed by Engr in charge.

Returning, filing in including, lelveling,watering and well ramming in layers not exc 25cm thick each complete all as specified and directed by Engr in charge.

Removing excavated material to a distance not exc 50m depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr in charge.

S & F for Anodised aluminium snap grid frame work ( 605x605 mm) for false ceiling all as specified and incl dismentling of existing false ceiling, etc complete all as specified and directed by Engr in charge.

S&F Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately complete all as specified and directed by Engr in charge.

M&L for mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr in charge.

Use & Waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr in charge.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete all as specified and directed by Engr in charge.

M & L for RCC nominal Mix Type B1, 1:2:4 (20mm graded aggregate) using 20 mm graded stone aggregate as in beam, roof beam, cantilevers, lintel beam, etc. complete all as specified and directed by Engr in charge.

Use & Waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cm wid (120mm thick of roof slab) complete all as specified and directed by Engr in charge.

M&L for RCC nominal mix type B1, 1:2:4 (20mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr in charge.

S & F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed by Engr in charge.

S & F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed by Engr in charge.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed by Engr in charge.

Taking down carefully UNSV DB's including MCBs of any size, type and capacity and depositing at site complete all as specified and directed by Engr in charge.

Taking down carefully UNSV submain wiring and xlpe cable of any size, type and capacity and depositing at site complete all as specified and directed by Engr in charge.

M & L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and good the distrubed surfaces ) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, all as specified, directed and shown on drgs for The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates complete all as specified and directed by Engr in charge.

(a) One light point controlled by one, one way switch complete all as specified and directed by Engr in charge.

(b) One fan/ Exhaust Fan point controlled by one way switch complete all as specified and directed by Engr in charge.

(c) One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch independent board complete all as specified and directed by Engr in charge.

(d) One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch complete all as specified and directed by Engr in charge.

All as per srl item No. 160 here-in-before but with 4.00 Sq mm FRLS copper wire with 4.00 Sqmm FRLS copper earth wire for indpendent 15 Amp point complete all as specified and directed by Engr in charge.

Suppling, fixing Switch piano type, single pole, one way, 5/6 amps, 230 volts, complete all as specified and directed by Engr in charge.

Suppling, fixing Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed by Engr in charge.

Suppling, fixing Switch piano type, single pole, one way, 15/16 amps, 230 volts, complete all as specified and directed by Engr in charge.

Suppling, fixing Socket, 6 pin, 5/16 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed by Engr in charge.

Suppling, fixing Ceiling rose, three terminals, bakelite body, 230 volts, complete all as specified and directed by Engr in charge.

S&F stepped type electroic fan regulator flush type o the xistig pheolic laminated sheet etc. as rquired complete all as specified and directed by Engr in charge.

Suppling, fixing and Replacement of Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed by Engr in charge.

Suppling, fixing LED Bulb 9 W complete all as specified and directed by Engr in charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr in charge.

Suppling, fixing LED light fitting 1 X 20 watt (4 feet), T -5 batten fitting, Desinged linear sleek aesthetic PVC housing, PC cover ensures soft an glare free lighting wide angle of 120º, upto (110 Lm/W) all as per HPL Cat No HPLT51820PCGWW or eqvt in of Baja/Philips complete all as specified and directed by Engr in charge.

Suppling, fixing of bldg security LED Light Luminaire of 35 Watts having IP 65 protection fiting of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length(or bracket as approved by GE) including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable complete all as specified and directed by Engr in charge.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr in charge.

S&F MCB, B Curve type, 10 kA, 6 to 40 Amp, Single Pole with over load and short circuit protection, complete all as specified and directed by Engr in charge.

Supply and fixing as MCB DB DD SPN 12 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and good surfaces of wall incl dismantling of old UNSV DB complete all as specified and directed by Engr in charge.

Supply and fixing as MCB DB DD SPN 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and good surfaces of wall incl dismantling of old UNSV DB complete all as specified and directed by Engr in charge.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN/FP 40 TO 100AMP following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed by Engr in charge.

Supply and fixing as TPN DB DD TPN 6 Ways where TPN/FP mcb use including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and good surfaces of wall incl dismantling of old UNSV DB complete all as specified and directed by Engr in charge.

M&L for Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, nnected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 5 connected to Earthing test point all as ecified or indicated including testing on completion( Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover & GI 15 mm dia protection pipe upto 7.5 mtr. lead etc. complete ) complete all as specified and directed by Engr in charge.

Supply, laying testing in trenches LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area 25 Sqmm 3.5 core complete all as specified and directed by Engr in charge. Note : Earth work and brick work measured and paid separately

Supply and laying Un reinforced Precast concrete cable cover, flat size 300 mm x 180 mm x 40mm complete all as specified and directed by Engr in charge.

Supply and lay sand for sand cushioning for cable protection in trenches complete all as specified and directed by Engr in charge in SSR Part - 1.Note:. for the purpose of payment punned thickness will be measured.

Supply and fix GI tubing medium grade of 40 mm dia for cable protection complete all as specified and directed by Engr in charge.

Taking down and rehanging after Repair/Rewinding old burnout Aluminium/copper winding of ceiling fan(1200mm) motor (M.D supply) and Painting of fan blade connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engr in charge.

Taking down and rehanging After Repair/Rewinding of Exhaust fan(300mm sweep) Heavy duty motor (M.D supply) and Painting of fan blade connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engr in charge.

M&L for sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 15 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as specified and directed by Engr in charge. Note:- Two run of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including good the disturbed surfaces.

D.K.CONSTRUCTION CO (BID ID -3284739)

SNEH CORPORATION (BID ID -3284023)

M/S KAUTILYA GARG (BID ID -3287606)

M/s Ajay kumar Garge (BID ID -3288067)