Annual Plan-Chalakudy Municipality Engg.Dept-Annual Projects,Electrical Installation of Fire Safety system in Townhall,Chalakudy.-Electrical Fire Fighting Work

Amount

Electrical Work

OD344531/2022-2023:Supply installation testing commissioning of main fire fighting pump of horizontal centrifugal end suction type rated for 2280 LPM at 50 meter head high efficiency to ensure a minimum pressure of 3.5 kg/sqcm at the farthest or topmost landing valve. The fire pump have cast iron casing impeller volute type, pump rated for automatic operation coupled to squirrel cage induction motor TEFC rated at 415 V 60 Hz foot mounted type suitable Hp, 2900 RPM including supply and installation of all accessories like base frame foundation bolts etc. complete. Make Kirloskar/ Mather and Platt.

OD344532/2022-2023:Supply installation testing and commissioning of jockey pump mono block rated for 180 LPM at 50 meter head high efficiency with suitable Hp volute type with cast iron casing bronze impeller, stainless sheet shaft with mechanical seal running at 2900 RPM pump rated for automatic operation coupled to squirrel cage induction motor totally enclosed fan cooled rated at 415 V, 50 Hz foot mounted type, including supply and installation of all accessories like base frame foundation bolts etc, complete. Make Kirloskar/ Mather and Platt.

OD344533/2022-2023:Supply installation testing and commissioning of Diesel Engine driven main fire pump suitable for automatic operations consisting of following : ( a) Horizontal type, end suction pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5kg/sqcm at highest and farthest outlet at specified flow of 2280 LPM at 50 meter head coupled to (b) Suitable Hp 1800 RPM water cooled with radiator , Diesel engine complete with auto starting mechanism, 12 Volts bar electric starting equipment, Diesel tank, exhaust pipe extended upto 1.0 meter outside pumphouse duly insulated with 50 mm thick glass wool with 1.0mm thick aluminum sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc, as required (d) Providing and fixing 15 mm dia GI pipe C class for fuel line as required (e) Suitable cement concrete foundation duly plastered with anti vibration pads. Make Kirloskar/Mather & Plat.

OD344534/2022-2023:Supply installation testing and commissioning of electric driven terrace pump rated for 450 LPM at 25 meter head high efficiency volute type with cast iron casing coupled to a squirrel cage induction motor totally enclosed fan cooled with supply condition 415 V, 3 phase, 50 Hz, foot mounted type rated for suitable 7.5 Hp or suitable Hp at 2900 RPM. Make Kirloskar/ Mather and Platt

90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet

90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7:Supply and providing copper earth bus in the panel board

2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

2.1.5:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.160 Amp TP&N

2.1.6:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.200 Amp TP&N

OD348563/2022-2023:Supply of fully automatic star-delta starter with MU-G50 FASD (with Wide band coil )Type for 50hP3Phase, 415 V,50 Hz, coil voltage 380 V, ntactor & Pneumatic timers for 50HP/37KW submerssible Motor HSN code 8536, cat. code CS96009COJO working with 380V overload delay of 45-75 (A) .

OD348562/2022-2023:Supply of MU -Automatic DOL starter with MU- 1A DOL ( with Sz5 SPRR) Suitable for 7.5 HP ,3Phase, 415 V,50 Hz, coil voltage 360 V, HSN code 8536, cat. code CS90898COAO working with 380V overload relay of 9 - 14(A) .

OD351040/2022-2023:S$F LED indicators for all voltage ranges - Red, Green, Black, Yellow or Orange colour

OD351042/2022-2023:Supply and providing multifunction meter to read V, A, f 3 phase accuracy class one.

OD351061/2022-2023:Supply, and providing Heavy Duty 12/24 V battery Charger with Ammeter and control circuit / protection as required.

OD351062/2022-2023:Supply, and providing 0.5A to 2 A SP MCB and giving connection as required .

OD351063/2022-2023:Supply, and providing OFF Delay Timer switch ( L&T or equivalent.

OD351064/2022-2023:Supply and fixing Blue colour indicators for AC/DC,22.5mmcut out dia

OD351039/2022-2023:Supplying and Fixing 200/5 A, 15VA,accuracy class0.5,Resin cast Metering CT.

1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

90.3.18.3:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.40 mm dia with clamps made from 20 x 3 mm MS flat

90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD341982/2022-2023:Supply and providing the following sizes of bolt and nut with washers on the existing M.S box/ earth bus etc. as required including drilling necessary holes as required. 25x3mm brass nut and bolt .

OD341983/2022-2023:Supply and providing the following sizes of bolt and nut with washers on the existing M.S box/ earth bus etc. as required including drilling necessary holes as required. 25x6mm brass nut and bolt .

90.12.6.27:Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 25 sq mm

90.12.7.30:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm

90.12.7.13:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 6 sq mm with factory made clamp

9.1.23:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

9.1.20:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm)

9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

90.16.1.4:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

90.16.2.1:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class)

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

OD344463/2022-2023:Providing and Laying ,Testing and commissioning of C ciass Heavy duty G I pipe GI pipe 150mm conforming to IS : 1239 I/c fittings like elbows, tees ,flanges tapers, nuts bolts gaskets etc. fixing the pipe on wall /ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.

OD344465/2022-2023:Providing and Laying ,Testing and commissioning of 80 mm C ciass Heavy duty G I pipe GI pipe conforming to IS : 1239 I/c fittings like elbows, tees ,flanges tapers, nuts bolts gaskets etc. fixing the pipe on wall /ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.

OD344467/2022-2023:Providing and Laying ,Testing and commissioning of C ciass Heavy duty G I pipe 100mm conforming to IS : 1239 I/c fittings like elbows, tees ,flanges tapers, nuts bolts gaskets etc. fixing the pipe on wall /ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.

OD346302/2022-2023: Supply, Installation, Testing and Commissioning Cast Iron Y type Strainer with SS mesh, suitable flanges, nuts, bolts gaskets etc. complete as required. 150mm dia.

OD346341/2022-2023: Supply, Instalation Testing and Commissioning of Heavy duty PN-25 grade flanged Expansion Rubber Bellow with CU to overcome vibrations. 100mm dia

OD346342/2022-2023: Supply, Instalation Testing and Commissioning of Heavy duty PN-25 grade flanged Expansion Rubber Bellow with CU for pump suction & Delivery to overcome vibrations. 150mm dia

OD346355/2022-2023: Supply, Instalation Testing and Commissioning of Heavy duty PN-25 grade flanged Expansion Rubber Bellow with CU to overcome vibrations. 150mm dia

OD346396/2022-2023:Supplying, fixing Testing and Commissioning of Butterfly Valve PN16 , bronze/Gun metal seat duly ISI marked complete with nuts bolts ,washers , gaskets conforming to IS13095 of 80mm dia Make preferred :INTER VALVE/ KARTAR.

OD346397/2022-2023:Supplying, fixing Testing and Commissioning of Butterfly Valve PN16 , bronze/Gun metal seat duly ISI marked complete with nuts bolts ,washers , gaskets conforming to IS13095 of 100mm dia Make preferred :INTER VALVE/ KARTAR.

OD346398/2022-2023:Supplying, fixing Testing and Commissioning of Butterfly Valve PN16 , bronze/Gun metal seat duly ISI marked complete with nuts bolts ,washers , gaskets conforming to IS13095 of 150mm dia Make preferred :INTER VALVE/ KARTAR.

OD346434/2022-2023:Supply and Fixing of 80 mm dia Horizontal type cast iron double flanged Non- return valveof approved quality conforming to IS:5312 with bolts ,nuts ,washers ,3mm thick insertion gaskets complete as requird. Make preferred: INTER VALVE/ KARTAR.

OD346435/2022-2023:Supply and Fixing of 100 mm dia Horizontal type cast iron double flanged Non- return valveof approved quality conforming to IS:5312 with bolts ,nuts ,washers ,3mm thick insertion gaskets complete as requird. Make preferred: INTER VALVE/ KARTAR.

OD346537/2022-2023:Supplying, fixing Testing and Commissioning of Air Cushion tank ( air vessel ) of continuos welded construction , fabricated out of atleast 8mm thick steel with dished ends , galvanised to IS 4736- 1968 and supporting legs, 250mm dia & 1200 mm high complete with necessary air release valve , safety valve , pressure gauge, flange connection to the wet riser pipng with necessary piping to meet the functional requierment of the system.

OD346538/2022-2023: Providing and Installation of Branch Pipe of 63mm Dia having Stainless Steel Body with Hexagonal head of 20mm dia nozzle conforming to IS with ISI mark.

OD346539/2022-2023: Providing and Installation of 63mm Dia 15 Mtr Rubber lined woven jacketed hose pipe type -A ( Reinforced rubber lined ) of IS-636-1988 complete with necessary instantaneous spring lock type coupling at the ends to match with landing valve/ hose pipe/ branch pipe with Stainless steel male & female couplings. Make preferred: CRC/ NEWAGE/ KARTAR

OD346886/2022-2023:Supplying, fixing Testing and Commissioning of cast iron Ball Valve 25mm dia . Make preferred : KARTAR /ZOLOTO .

OD346887/2022-2023:Supplying, fixing Testing and Commissioning of 3Way Fire Brigade Inlet connection of 63mm Dia built in Gun metal Non Return Valves instantaneous coupling type arrangement to be connected to wet riser main . Make preferred : ARIHANT/ NEW AGE/ KARTAR

OD346888/2022-2023:Supplying, fixing Testing and Commissioning of Gun Metal Air Release valve20mm Dia . Make preferred : KARTAR/ARIHANT /ATOM.

OD346889/2022-2023:Supplying, fixing Testing and Commissioning of Industrial type Pressure Switch having 1/4 " BSP (F) connection IP32 enclosure protection , phosphur bronze bellows as sensing element , SDPT Contact system , switch rating Inductive /IOA resistive 380 V,AC ,0.2 A inductive/10A resistive 250 V DC suit with ball valve etc. complete as required. Make preferred : INDFOSS / WAREE

OD346890/2022-2023:Supplying, fixing Testing and Commissioning of 0 _ 15kg/sqcm 100mm dia Dial type Pressure gauge with isolation pipe and coke at hydrant station as per specification, Make preferred :FEBIG / HGURU

OD346906/2022-2023:Supply & Errection of 12 V,7AH Battery for fire Alarm panel 7 TALK bACK PANEL ,MAKE PREFERRED :Exide /Panasonic.

OD346908/2022-2023:Supply and installation of ABC Powder Type (Stored Pressure) Fire Extinguisher 6kg . Capacity ISI Mark IS: 15638 consisting of M.S cylindrical body, squeeze leve,r discharge valve fitted with pressure indicating gauge, 30cm long, high pressure discharge hose, nozzle etc. with MAP Powder for 'A','B' & 'C' class fire, fixing on wall with wallhook etc as required.Make Preferred : SAFETY FIRST / SAFEX / BHARAT

OD348300/2022-2023:SUPPLY, ERRECTION ,TESTING AND COMMISSIONIG OF 5 wATT, PA cum TALK baak speaker wall mouted type.

OD348302/2022-2023:Supply, installation, Testing and Commissioning of control panel of 6Zone complete with charger, rectifier, alarm display, with all other necessary attachments with provision for Public Addressing System and battery back up. Make Preferred :AGNI, / RAVEL / ASWIN .

OD348303/2022-2023:Supply, Installation, Testing and Commissioning of CO2 type fire Extinguisher with 4.5Kg capacity complete with installation brackets with ISI mark IS:15638, Make Preferred: SAFEX/BHARAT /KANEX.

OD348316/2022-2023:sUPPLY and Errection of MICROPHONE for intelligible, crisp and bright sound suitable for all type of fire applications . Supplied with quick detachable holder with 3-pin professional XLR Connector & 6 Mtrs . twin core shielded low noise cable.

OD348561/2022-2023:Supply, and providing 240V AC Relay switch Pin and giving connections as required

OD348624/2022-2023:Supply, Installation, Testing and Commissioning of 2CX 1.5 Sq.mm twisted pair copper Cable ISI marked with proper clamping ,supports,and terminations. Make Preferred: PolyCAB /HAVELLS,/ VARSHA.

OD349894/2022-2023: Supply and errection of Glow Sign Board made of 3mm thick PVC foam board for each floor 12"x4" (Fire lift, Electrical duct, Fire station, Main stair, Fire Exit, Floor Display & pump room.

OD349895/2022-2023:Supply and Errection of in position the "Fire Boards approved by Kerala state fire services-size 16"x16"made out of PVC rigid sheet 3mm thick with computer cut PVC reflective self -adhesive imported vinyl painted on the front of PVC rigid sheet complete with wall mounting arrangements with mirror screws with lettering " ASSEMBLY AREA "

OD346907/2022-2023:Supply and providing 2.00 mm thick 3.3 KV synthetic elastromeric fire retardant insulating sheet.

OD349896/2022-2023:Supply and Errection of Fire Escape route in each floor having size 12" x 16"

OD349897/2022-2023:Preparation of FF system Drawing and check list as per new Fire Rules including printing in colour ,conducting Fire Force Inspection and obtaining Final NOC from Fi Force Dept.

OD349898/2022-2023:Additional work- Continuity and loop checking of existing cabling , checking of detectors, MCP and Hooter etc.for enabling Fire Alarm System & Fire System.

OD349899/2022-2023:Additional work -Pressure Testing and Commissioning of existing under ground and above ground piping and components

OD351041/2022-2023:Painting letters or figures of the sizes 2.5 cm, 4 cm, 5cm height with enamel paint as identification mark to SB, DB, Panel board etc. as required

Allies Fire Systems Pvt Ltd

RAYAN FIRE PROTECTION SYSTEMS

Bidder Name

Allies Fire Systems Pvt Ltd

RAYAN FIRE PROTECTION SYSTEMS

COCHIN SURAKSHA INFRASTRUCTURE PRIVATE LIMITED