SPECIAL REPAIR TO FIRST FLOOR OF BLDG P17 AT HQSAC U TRIVANDRUM

Amount

SCHEDULE 'A'

M& L for demolition/dismantling surface of old concrete by picking, sweeping clean and washing down with water to remove all loose dust and providing 3mm thick water proofing membrane not less than 4kg/sqm reinforced with non woven fabric polyester matt weighing not less than 0.2kg/Sqm incl applying oil bound bitumen primer @ 0.20 kg/sqm all as specified and applying one coat of blown grade hot bitumen 85/25 or equivalent over the membrane @ 1.20 kg/sqm including Solar reflective Bituminous aluminium paint @ 0.10 Kg /sqm complete all as specified and directed.

M&L for providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in floors all as specified and directed by Engineer-in-Charge

Taking down cement or cement lime plaster, any description, on brick walls including racking out joints hacking for key scrubbing down with water etc. all as specified and directed.

M&L for rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:4 in ceiling surface finished even and smooth with out using extra cement all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:4 finishing even and smooth with out using extra cement all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer all as specified and directed.

M&L for Preparing old surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for Glazed ceramic coloured tiles 350 x 250 x 7 mm /450x350x7mm thick in vertical surfaces as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles all as specified and directed.

M&L for non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick light shade area of each tile not exceeding 0.36Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick light shade area of each tile exceeding 0.42Sqm but not exceeding 1.00 Sqm , in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and aprons removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:4 as in backing coat all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

Taking down chowkats or frames (without taking off shutters from frame) not exceeding 1.5 sqm all as specified and directed.

M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and directed by Engineer-in-charge.

S&F of powder coated aluminium window and ventilator glazed shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/m (standard aluminium section of DG-2496 of sizes 39.4 x 17.7 mm and 1.2 mm thick (min) including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2Nos), suitable handle (1Nos) for each shutter complete all as specified and directed by Engr-in-charge.

S&F obscured or frosted sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane complete all as specified and directed.

S&F aluminium alloy wire cloth, 0.45 nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, (excluding fixing bolts,flushing cistern and flush pipe), all as specified and directed by Engrineer-in-Charge.

Supply only of 10 lit capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed in repairs, all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, of size 550x400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets and brass, cutting for pinning in ends of brackets or erecting stand, all as specified and directed by Engineer-in-Charge.

S&F in repairs CP cast copper alloy health faucet ABS body with 1mtr SS braided connection pipe complete all as specified and directed by Engineer in charge.

S&F in repairs CP cast copper alloy 15 mm bore Bib cock with flange and aerator suitable for pipe of 20mm dia complete all as specified and directed by Engineer in charge.

S&F in repairs square trap with CP grating (5mm border)150x150mm size with or without waste hole complete all as specified and directed by Engineer in charge.

S&F in repairs 32mm flexible PVC down waste pipe suitable for sink, wash basin and urinal complete all as specified and directed.

S&F in repairs CP towel rail 600 mm long fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs CP toilet paper holder fixed to wall as specified and directed.

S&F in repairs corner 8mm thick glass shelf (medium 225x225mm) with CP fittings fixed to wall as specified and directed.

Supply only plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs soap and shampoo tray of snow white as specified and directed.

S&F in repairs CP angle cock with wall flange as specified and directed.

S&F in repairs CP pillar cock with aerator as specified and directed.

S&F of factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening as all as specified and directed.

S&F of Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colourr PVC 'C' channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain clour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement all as specified and directed.

S&F 75 mm long Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type C-21 all as specified and directed.

S&F of 100 mm long Aluminium alloy handles fabricated type anodised all as specified and directed.

S&F 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed.

Demolition of Brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed.

Taking down and refixing of urinal bowl type or half stall patterni ncluding connections to flushing pipe and outgoing pipes fixed in repairs all as specified and directed by Engineer-in-Charge.

S&F in repairs 700x500mm mirror 5mm thick glass mirror with double coat protection and lonevity , grounded edges for safety and silver plating on the back for batter reflection fixed to wooden plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.

Taking down copper/aluminum point wiring (Light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets etc removing serviceable materials to store for keeping in safe custody or taking credit (credit for above items should be made as per conditions separately ) and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring complete with 1.5 Sqmm 1100 V grade single core FRLSH PVC insulated unsheathed cable with multi stranded copper conductor ISI marked drawn through concealed PVC conduit ISI marked of suitable size on walls/ceilings etc and including provn of 1.5 Sqmm PVC insulated copper cable as earth continuity conductor connected to common earth dolly including 1.2mm thick pressed steel terminal boxes of suitable size with 3mm thick laminated sheet cover for (i) One light/fan point controlled by one switch. for mounting switches and sockets all as specified and directed . Note:- Rate for cutting of chases for fixing of PVC conduits and its accessories including making good the disturbed surfaces of walls/ floors etc with the existing deemed to be included in the item rate

(ii) All as per Item No.47 above but for One switch socket outlet 5 Amps on independent board complete all as specified and directed by Engineer-in-Charge.

All as per Item No 47 here-in- before but with 2.5 Sqmm PVC insulated FRLSH multistranded copper conductor with 2.5 sqmm cable as earth continuity conductor for one 3 pin socket outlet 16 Amps concealed in wall / ceiling complete all as specified and directed by Engineer-in-Charge.

Supply and fixing submain wiring with two run of FRLSH single core cable PVC insulated unsheathed cable 1100 volts grade 4 Sqmm copper multistranded conductor including and drawing into PVC conduit, fixed on wall, ceiling including one run of 4 sqmm FRLSH PVC insulated unsheathed multistranded for earth wire connected to earth complete. Note: Length of 2runs x 4 Sqmm copper FRLSH cable and one run of 4Sqmm earth conductor alongwith existing PVC rigid conduit shall be measured as one length

Supply and fix modular switch 1 way,6A, 1 module complete all as specified and directed by Engineer-in-Charge.

Supply and fix modular socket 6A, 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge.

Supply and fix modular switch 1 way,16A, 1 module complete all as specified and directed by Engineer-in-Charge.

Supply and fix modular socket 6A/ 16A, 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge.

Taking down U/s MCB distribution board and S&F SPN 8 way of any size and capacity double door with suitable busbar including diconnecting from mains and making good disturbed surface complete all as directed and as specfied.

Supply and fix only the MCB SP 6-32A ,230V,50Hz,AC with rupturing capacity 10kA all as specified and as directed.

Supply and fix only the MCB SPN 40A ,230V,50Hz,AC with rupturing capacity 10kA all as specified and as directed.

S & F in replacement stepped type electronic fan regulator modular type 120W-2 module,240V, single phase complete all as specified and as directed.

Supply and fix in replacement of UNSV tube light fitting of 36/40 W with surface mounting rail for 20W LED tube with special integral lamp holder and bracket including 20Watt LED tube complete with accessories internally pre wired connecting up with twin core flexible copper conductor cable of suitable size all as specified and directed.

Supply and fix Wall mounting Fan 450mm sweep with oscillating 220v 50 Hz AC complete with all accessories suitable for wall mounting all as specified and as directed

S&F Ceiling rose, surface bakelite 65x50mm, two to three terminals, Ac, 230v, polycarbonate, isolated body complete all as specified and as directed.

Taking out the ceiling fan of any size from site and refixing the same to new location duly painted with all connected items all as specified and directed..

Total of Schedule 'A'

KENZ CONSTRUCTIONS

AKASH CONSTRUCTIONS

Dhanyaconstructions

K R JOSEPH AND SONS