Balance work for construction of Type-II Quarter with Parking Revenue Colony at Kangra

Amount

Excavation in foundation, trenches etcetra in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil includinjg shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush which may arise during de-watering or removal of slush, lift upto any height stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specification, approved drawings, design as per the entire satisfactions and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Excavation in drains and channels etcetra in earth work in all kind of classificatrion of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting and work doing in saturated soil, including chiselling or wedging out rocks where blasting work is prohibited, any other mixed variety of soil includinjg shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush, which may arise during de-watering, removal of slush and stacking the excavated soil for all heights clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm. (Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centering below supporting floor to ceiling for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls any thickness partition and the like including attached pilasters, buttresses, plinth string courses and the like, as per specifications, approved drawing, design, as per entire satisfactions and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm.(Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm.,(Thirty into thirty into five milimetre)so as to give a fair finish including centring,shuttering, strutting and propping etcetra with wooden battens and ballies complete upto all heights/ depth of propping and centering below supporting floor to ceiling for all height and removal of the same for insitu- reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm. (Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre ) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centering below supporting floor to ceiling for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Edges of slab and breaks in floors and walls under any thickness, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 ( One Cement isto four Sand isto eight graded crushed stone aggregate 40 mm (forty milimetre) nominal size mechanically mixed and curing complete excluding the cost of form work. in foundation and plinth, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm² (twenty newton per square milimetre) with cement contents not less then 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in walls any thickness including attached buttresses, pilasters and their caps bases and string courses etcetra as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying reinforced cement concrete work of grade M-20 (M- Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 ( Twenty newton per square millimetre) with cement contents not less than 320 Kgs/m3 (three hundred twenty kilograms per Cubicmetre) mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing and shelves and their support balconies, lintel beams, girders, breassumers and cantilever for all depth/thickness plinth to all floor levels, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 (One Cement isto Six Sand) and curing complete. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Tor steel of TATA/ SAIL/TISCO reinforcement for Reinforced cement concrete work including cutting, straighting, bending, binding and placing in position, including cost of binding wire complete for all floor level, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 40mm (Forty milimetre) thick second class deodar wood paneled glazed or paneled and glazed shutters for doors and windows including black enameled iron butt hinges with necessary screws. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate including octroi, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85-G with a wire of dia 0.56(Zero decimal Fifty six milimetres) for doors and windows and clerestory windows including bright finished black enameled iron hinges with necessary screws 40mm (Forty milimetres) 2nd class deodar wood, within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing plain M.S. (Mild steel) Grills of required pattern in structural steel frames of windows etcetera with Mild Steel flats square or round bars with headed bolts and nuts or screws including welding with frames complete in all respect, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax,GST or any other taxes imposed by the Government.

Providing and fixing 250x16mm Two hundred fifty into Sixteen milimetres) size anodized aluminum sliding door bolts make of PILOT/ SHEEL anodized transparent or dyed to required colour and shade with bolts and nuts necessary screws etcetra complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 250x10mm (Two hundred fifty into Ten milimetre) oxidized M.S. Tower bolts (Barrel type) with necessary screws etc. Complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 100x10mm (One hundred into Ten milimetre) oxidized M.S. Tower bolts (Barrel type) with necessary screws etc. Complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) size aluminium anodized make of PILOT/ Sheel handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) size aluminium anodized make of PILOT/ Sheel handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetres) bright finished brass floor door stopper with rubber cushion and necessary screws etcetera to suit shutter thickness complete, including carriage of material within all leads, lifts and other incidentals. The rate includes, royality charges, octroi, GST, malkana and all other taxes as imposed by the Government.

Providing and fixing oxidized M.S. Hooks and eyes 150mm (One hundred fifty milimetre), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer M.S. tube as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 85cm high railing having ballusters of 19x19mm (Nineteen into Nineteen milimetre) and 12x12mm (Twelve into Twelve milimetre) M.S. Solid square bars in combination with M.S. Flat of 40x5mm (Forty into Five milimetre) size with hand rail balluster duly welded/ jointing with eletric gas welding with top M.S. Flat, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve milimetre) prelaminated board both side bwp phenol bonded exterior/interior grade panelled shutters with frame of first class deodar wood for doors including bright finished /black enamelled iron butt hinges with necessary screws 40mm (Forty milimetre) thick frame, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government.

Providing and laying 60mm (Sixty milimetre) thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government.

Providing and laying vitrified floor tiles of Resityle/Johnson/ Nitco/ Kajaria/ AGL/ Simpolo/ Somany in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty milimetre) thick cement mortar 1:4 (One cement isto Four coarse sand), jointing with grey cement slurry @ 3.30 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete size of tile 600x600mm (Six hundred into Six hundred milimetre) and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying vitrified floor tiles of Rak/ Nitco/ Kajaria/ AGL & Simpolo in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty milimetre) thick cement mortar 1:3 (One cement isto Three coarse sand), jointing with grey cement slurry @ 3.30 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete size of tile 600x600mm (Six hundred into Six hundred milimetre) and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (Twelve milimetre) (average) thick cement mortar 1:3 (One cement isto Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 18 mm (Eighteen milimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (One cement isto Four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade Area of slab upto 0.50 sqm and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying coat of approved steel primer using structural steel etc. as required in grating, frames, guard bar, ladder, railing, brackets, gates and similar works and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal six zero milimetre) thick prepainted steel sheet of TATA/Sail/Reliance/Jindal in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5(Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted J or L hooks, bolts and nuts of size 6mm dia (Six milimetre diameter) with prepainted limpet and rubber washers complete with all accessories as required, as per the direction of Engineer-in-Charge, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (Sixty centimetres) overall width and 0.45mm (Zero decimal forty five milimetre) thick prepainted steel sheet ISI marked ridges (factory made) of TATA/SAIL/Reliance /Jindal steel shall be having proper Gola/shape of steel sheet with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted J or L hooks, bolts and nuts 6mm (Six milimetre) dia with prepainted G.I. limpet and bitumen washer complete with all accessories as required, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing valley 90cm (Ninety centimetre) overall width and 0.60mm (Zero decimal six zero milimetres) thick prepainted steel sheet hot dipped metallic zinc coated sheet ISI marked of TATA/ SAIL/Reliance/Jindal steel with top coat of regular modified polyester (RMP) organic coated of 20 (twenty) microns over 5 (Five) micron primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetre) with prepaintred limpet and bitumen washers complete with all accessories as required, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15cm (Fifteen centimetre) wide and 45cm (Forty five centimetre) deep 0.80mm (Zero point eight zero milimetre) thick Plain Galvanised Iron sheet gutter TATA/ SHAKTI with iron brackets 40x3mm (Forty into Three milimetre) size bolts, nuts and washers etc. including making necessary connections with rain water pipe complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 6mm (Six milimetre) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providng and Fixing Mild Steel Black Plain Sheet 2mm (Two milimetre) thick in eaves board/ facia/soffits/ceiling including cuttng, fixing and welding to steel roof members and applying a coat of red lead primer complete (base members of steel work shall be measured & paid separately), as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face 110mm (One hundred ten milimetres) diameter P.V.C. polyvinyl chloride D-plast or equivalent rain water pipes of working pressure not less than 4.50 kg (Four point five zero kilogrammes) per Square Metre including filling the joints with approved adhesive including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, malkana and all other taxes as imposed by the Government.

Providing and fixing on wall face PVC accessories (D-plast) for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (One cement isto Two Sand), as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts of materials and other incidentals. Plain bend 110mm (One hundred ten milimetre) diametre

Providing and fixing on wall face PVC accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (One cement isto Two Sand), as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts of materials and other incidentals. Plain Shoe 110mm (One hundred ten milimetre) diametre

Applying Birla J.k. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dirt, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government.

Distempering (two or more coats) with acrylic oil bound washable distemper with Nerolac/ Asian or equivalent of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surfcace even and sand papered smooth priming coat with distemper primer. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate including octroi, Malkana, toll tax, GST or other taxes imposed by the Government.

Applying priming coat with Asian/ Nerolac enamel paint or equivalent over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink including carriage of materials within all leads and lifts and other incidentals as per the direction of Engineer-in-Charge. The rate including octroi, Malkana, toll tax, GST or other taxes imposed by the Government.

Painting two coats on new wood and wood based surface with enamel paint to give an even shade including cleaing the surface of dirt dust and other foreign matter and sand papering and stopping with enamel paint other than white. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate including octroi, Malkana, toll tax, GST or other taxes imposed by the Government.

Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government.

Painting steel work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 18 mm (Eighteen milimetre) thick, 150 mm (One hundred fifty milimetre) wide pelmet of flat pressed 3 (Three layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm (Six milimetre) commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm (Ten centimetre) long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm (One hundred into Forty into Forty miliemetre) on both inner side of pelmet and rawl plugs 75mm (Seventy five milimetre) long etc. all complete and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing Plinth protection 50mm(Fifty milimetre) thick with cement concrete 1:3:6 (One cement isto Three sand isto Six graded stone aggregate 20mm (Twenty milimetre)nominal size including finishing the top surface of concrete smooth within all leadsand lifts of material and other incidentals as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

15 mm (Fifteen milimetre) thick cement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to all floor level including arises, internal angles, chamfers and /or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth with cement mortar 1:6 (One cement isto Six sand), within all leadsand lifts of material and other incidentals as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Filling in Plinth with sand under floors including watering ramming consolidating and dressing complete, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixng Vitreous china wash down water closet European type W.C. Pan seat No.20087 (Twenty thousand eighty seven) of Hindware/Cera/Jaquar of Star shite/Snow white shade and its equivalent with integral P or S trap including joisting the trap with soil pipe in cement mortar 1:1 (One Cement isto One Sand) (Earth work, bed concrete, foot rest and trap measured and paid for separately) Indian Universal closet, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing flat back 550x400mm (Five hundred fifty into Four hundred milimetre) vitreous china wash basin with single hole for pillar trap of Garnat No.10010 with under counter of Cera/Jaquar or Star/Snow white Hindware with C.I. or M.S. bracketsw painted white including cutting hloles and making good the same but excluding fittings, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two milimetre) dia PVC waste pipe of Hindware/Cera/ Jaquar, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing G.I. inlet connection for flush with WC pan , as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x20mm Stainnless steel Towel rail of Continental series of Jaquar/ Classic series of Hindware/Floral series of Cera I.S. marked complee with C.P. brass brackets fixed in wooden plugs with chromium plated brass screws, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into four hundred fifty milimetre) beveled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screwsw and washers, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. brass full way valve with wheel of continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera 25mm (Twenty five milimetre) nominal bore, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. brass full way valve with wheel of continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera 32mm (Thirty two milimetre) nominal bore, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm dia (Fifteen milimetre) diametre C.P. Brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 of continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm dia (Fifteen milimetre) diametre C.P. Brass Bib cock of continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) dia C.P. brass stop cock, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore P.V.C. connection pipe with brass union 45cm length complete, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing chorimum plated brass soap dish with C.P. brass brackets of continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera fixed to wooden cleats with C.P. brass screws, including carriage of materials within all leads, lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing bath shower of continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing drainage board or continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera with C.I. Brackets inclding painting of brackets, cutting and making good the walls wherever required white glazed fire clay draining board of sizevitreopus china 600x450x25mm (Six hundred into Four hundred fifty into Twenty five milimetre) size, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal outer dia pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 20mm Twenty milimetre) nominal outer dia pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 25mm Twenty five milimetre) nominal outer dia pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing water tank make P.V.C. (Poly Venyl Chloride) SINTEX with tripple layer having capacity of 1000 litres (One thousand) litres each tank ISI 12701 (Twelve thousand seven hundred one) G.I. (Galvanised Iron) necessary fittings including over flow pipe scour pipe etectera for inlet and outlet and inside connection 15mm (Fifteen milimetre) nominal bore ball valve and P.V.C. (Poly Venyl Chloride) cover with locking arrangements including placing with all height above ground level complete in all respect as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is inclusive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and Dora size 470x420mm (Four hundred seventy into Four hundred twenty milimetre) with bowl depth 178mm (One hundred seventy eight milimetre) of Cera or its equivalent stainless steel Kitchen sink with drain boarfd and C.I. or M.S. bracket painted white including cutting holes in walls and making good the same but excluding the cost of fitting, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) diametre Type-B conforming to BIS-13592-92 in trenches P.V.C. Supreme or equivalent pipe soil, waste and ventilating pipes fixing with adhesive mixture complete 8/4.6mm (Eight/Four point six milimetre) thick of supreme or its equivalent including entire carriage of material within all leads, lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetre) diametre Type-B conforming to BIS-13592-92 in trenches P.V.C. Supreme or equivalent pipe soil, waste and ventilating pipes fixing with adhesive mixture complete 8/4.6mm (Eight/Four point six milimetre) thick of supreme or its equivalent including entire carriage of material within all leads, lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) (Confirming to ISI No.14735-99 PVC Supreme/ Kishan/ Astral or equivalent plain bend including filling the joints with approved adhesive complete, as per specification, approved drawing, design as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetre) (Confirming to ISI No.14735-99 PVC Supreme/ Kishan/ Astral or equivalent plain bend including filling the joints with approved adhesive complete, as per specification, approved drawing, design as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing single equal branch of required P.V.C. Supreme/ Kishan/ Astral or equivalent plain bend 100mm (One hundred milimetre) nominal size, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any othr taxes imposed by the Government.

Providing and fixing single equal branch of required P.V.C.Supreme/ Kishan/ Astral or equivalent plain bend 75mm (Seventy five milimetre) nominal size, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any othr taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) diametres PVC Supreme/Kishan/ Astral or equivalent Collar complete as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any othr taxes imposed by the Government..

Providing and fixing 75mm (Seventy five milimetre) diametres PVC Supreme/Kishan/ Astral or equivalent Collar complete as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any othr taxes imposed by the Government..

Providing and fixing 100mm (One hundred milimetre) nominal size/diameter PVC clamps for PVC pipe, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Constructing manhole with RCC (reinforced cementconcrete) top slab in 1:2:4 mix in (One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size), foundation concrete 1:4:8 (One Cement: Four Sand: eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size, inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One Cement: Three Sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ((One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) finished smooth complete including curing and testing Inside size 800mmx800mm (Eight hundred milimetre into Eight hundred milimetre) and 500mm (Five hundred milimetre) deep including C.I. (Cast Iron) cover with frame, (Light duty single seal pattern –I) 455mmx610mm (Four hundred fifty five into Six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15kg (Ffteen kilogram) with 300mm (Three hundrede milimetre) thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (One Cement: Three Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Constructing manhole with RCC (reinforced cement concrete) top slab in 1:2:4 mix (One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size), foundation concrete 1:4:8 (One Cement: Four Sand: eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size), inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One Cement: Three Sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ((One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) finished smooth complete including curing and testing Inside size 800mmx800mm (Eight hundred milimetre into Eight hundred milimetre) and 1000mm (One thousand milimetre) deep including C.I. (Cast Iron) cover with frame, (Light duty single seal pattern –I) 455mmx610mm (Four hundred fifty five milimetre into Six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15kg (Ffteen kilogram) with 300mm (Three hundrede milimetre) thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (One Cement: Three Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm dia (One hundred milimetre) diametres C.P. (Chromium Plated) Grating of Paryag/ Hindware/ Cera for gully floor or Nahni trap as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetre) dia on wall face PVC (D-Plast) rain water pipe finolex/ Rel pipe (Reliance/Vectus or its equivalent of working pressure not less than 4.50 kg/per sqm including filling the joints with approved adhesive complete, as per specification, approved drawing, design as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leasds, lifts and other incidentals. The rate inclusive of octroi, royality, malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty milimetre) dia Peet valve without nut and pipe, as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15 cm(Fifteen centimetre) wide, 45 cm (Forty five centimetre) overall semi- circular plain G.S. sheet gutter with iron brackets 40x3mm (Forty into Three milimetre) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete 0.80 mm Zero point Eight Zero milimetre) thick with zinc coating not less than 275 gm/m² as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Supplying and fixing C.I. cover without frame for manholes 560 mm (Five hundred sixty milimetre) diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. (One hundred eight kilogram) as per specification, approved drawing design as per entire satisfaction and direction of the Engineer-in-Charge within all leads and lifts and other incidentals. The rate is incluisive of octroi, royality, malkana toll tax, GST or any other taxes imposed by the Government.

Neeraj

Ashwani

PARDEEP KUMAR