Self supported arch shaped Galvalume sheeting for construction of 2000MTs capacity godown, compound wall and approcahes in the Market Yard, Uppalaguptam under AMC, Amalapuram in Dr.B.R.Ambedkar Konaseema District.

Self supported arch shaped GALVALUME sheeting. Color compying to ASTM A792, base metal thickness 1.00mm, alloy coating AZ 150 (Alumminium 55% Zinc 43.50% and Silicon 1.5%), Yield Strength: 350MPA, Paint coating regular modified polyster top coat 12 microns epoxy, top color: Combination of Blue and Off white and Bottom color grey using make of Self Supported Arch Type Calvalume Sheet roofing works with Indian make :JSW/TATA blue scope. The Steel Sheet Shall be3'-0" (914MM) width which shall be curved and moulded at site using mechanical press and dies to the desired curves and shape to form 2'0" (605MM) wide interlocking panels. These panels shall be erected in position and the joints are seamed. The instalation should be done by mechanized methods. Vendor has to mobilize required number of Hydra for transporation of sheets and Cranes for the erection of Seamed Sheets and complete the entire work satisfactorly by using the fixtures like anchor fasteners, standard light hangers, turbo ventilators and sky lights etc., complete as per terms and conidtions inclusive of GST and all taxes etc., complete.

Providing High Yield Strength Deformed steel bars (Fe 500 grade) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work.

VRCC M-20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

For Columns above 3.66mts

Fal-G Brick Masonry in superstructure with CM (1:6) prop: using Fly ASH Bricks of size 290x225x140mm with compressive of 50 Kgs / Sqcm from approved source including cost and conveyance of all materials like cement, sand, fly ash bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work. For Basement.

Plastering with CM(1:5) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work.

For Upto 3.00Mts

For Above 3.00MTs

Supply and fixing of Rolling shutter made of 80x1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end locks, mounted on specially designed pipe shaft of 50mmdia nominal bore MS B class pipe with brackets,plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete painted with one coat of approved steel primer, locks, ball bearings, all acessories etc., complete for finished item of work as per special spn: 108.

Manufacturing, Supply & fixing of MS Frame Airvents of size 0.75x0.75mts with 35x35x6mm MS angular of outer frame 25x25x5mm MS Angular for inside frame and 14 guage for shutter with 12mm squre rods and MS mesh, tower bolts, hinges, handles and corner livers etc., including cost and converyance of all materials, fabrication charges and all labour charges for fixing in position, transport charges, all taxes etc., complete as per SS and as directed by the Engineer-in-Charge.

Self supported arch shaped GALVALUME sheeting. Color compying to ASTM A792, base metal thickness 1.00mm, alloy coating AZ 150 (Alumminium 55% Zinc 43.50% and Silicon 1.5%), Yield Strength: 350MPA, Paint coating regular modified polyster top coat 12 microns epoxy, top color: Combination of Blue and Off white and Bottom color grey using make of Self Supported Arch Type Calvalume Sheet roofing works with Indian make :JSW/TATA blue scope. The Steel Sheet Shall be3'-0" (914MM) width which shall be curved and moulded at site using mechanical press and dies to the desired curves and shape to form 2'0" (605MM) wide interlocking panels. These panels shall be erected in position and the joints are seamed. The instalation should be done by mechanized methods. Vendor has to mobilize required number of Hydra for transporation of sheets and Cranes for the erection of Seamed Sheets and complete the entire work satisfactorly by using the fixtures like anchor fasteners, standard light hangers, turbo ventilators and sky lights etc., complete as per terms and conidtions inclusive of GST and all taxes etc., complete.

Providing High Yield Strength Deformed steel bars (Fe 500 grade) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, welded joints, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc., complete for finished item of work.

VRCC M-20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work.

For Columns above 3.66mts

Fal-G Brick Masonry in superstructure with CM (1:6) prop: using Fly ASH Bricks of size 290x225x140mm with compressive of 50 Kgs / Sqcm from approved source including cost and conveyance of all materials like cement, sand, fly ash bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work. For Basement.

Plastering with CM(1:5) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work.

For Upto 3.00Mts

For Above 3.00MTs

Supply and fixing of Rolling shutter made of 80x1.25mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end locks, mounted on specially designed pipe shaft of 50mmdia nominal bore MS B class pipe with brackets,plates, guide channels, stoppers, bottom locking plates and arrangements for inside and outside locking with push-pull operations including cost of hood cover and springs complete painted with one coat of approved steel primer, locks, ball bearings, all acessories etc., complete for finished item of work as per special spn: 108.

Manufacturing, Supply & fixing of MS Frame Airvents of size 0.75x0.75mts with 35x35x6mm MS angular of outer frame 25x25x5mm MS Angular for inside frame and 14 guage for shutter with 12mm squre rods and MS mesh, tower bolts, hinges, handles and corner livers etc., including cost and converyance of all materials, fabrication charges and all labour charges for fixing in position, transport charges, all taxes etc., complete as per SS and as directed by the Engineer-in-Charge.