REWIRING REPAIR AND MAINT OF E M FITTING FIXTURE IN MD ACCN AGE BR I AND REPAIRS TO CEILING FAN EXHAUST FAN TABLE FAN WALL MOUNTING FAN PEDESTAL FAN AIR CIRCULATING FAN IN ARMY AREA UNDER GE ARMY CENTRAL JODHPUR

Amount

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc . removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and as directed.

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including drawn through and including in PVC rigid conduit with all accessories complete surface in wall/ceiling/floor etc, ISI marked with 1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/fan/ bell point controlled by one, one way switch complete all as specified and directed .

All as per serial item No 2.00 above but for One light point controlled by 2 way switch.

All as per serial item No 2.00 above but for 5 Amps socket on same board with other switches.

All as per serial item No 2.00 above but for 5 Amps socket on independent board.

All as per Item No. 2.00 above but for 15 Amps 5/6 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire,complete all as specified and as directed.

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including in PVC casing & caping with all fittings and accessories , complete fixed on wall/roof/floor etc, with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/fan/ bell point controlled by one, one way switch complete all as specified and directed .

All as per serial item No 7.00 above but for 5 Amps socket on same board with other switches.

All as per serial item No 7.00 above but for 5 Amps socket point on independent board.

All as per serial item No 7.00 above but for One light point controlled by 2 way switch.

All as per serial Item No. 7.00 above but for 15 Amps 5/6 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and as directed.

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including drawn through in existing pvc rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with 1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light / fan / bell point controlled by one, one way switch complete all as specified and directed .

All as per serial item No 12.00 above but for One light point controlled by 2 way switch.

All as per serial item No 12.00 above but for 5 Amps socket on same board with other switches.

All as per serial item No 12.00 above but for 5 Amps socket on independent board.

All as per Item No. 12.00 above but for 15 Amps 5/6 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire,complete all as specified and as directed.

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including drawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with 1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/fan/ bell point controlled by one, one way switch complete all as specified and directed .

All as per serial item No 17.00 above but for One light point controlled by 2 way switch.

All as per serial item No 17.00 above but for 5 Amps socket on same board with other switches.

All as per serial item No 17.00 above but for 5 Amps socket on independent board.

All as per Item No. 17.00 above but for 15 Amps 5/6 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire,complete all as specified and as directed.

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in 20mm dia PVC rigid conduit with all accessories complete concealed / recessed in wall/roof/floor etc, ISI marked with modular metal flush box of suitable size for mounting of modular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for, one way switch one light / fan point controlled by one way switch complete all as specified and directed .

All as per serial item No 22.00 above but for 5 Amps socket on independent board.

All as per serial item No 22.00 above but for 5 Amps socket on same board with other switches.

All as per serial item No 22.00 above but cable size 2.50 sqmm suitable for 3/5 pin 15/16 Amps socket on independent board.

All as per Item No. 22.00 above but for 15 Amps socket point on independent board with 4 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire,complete all as specified and as directed.

M&L switch piano, flush type, single pole, one way, 5/6 Amps, 230 Volts complete all as specified and as directed. Make: Legrand / L&T / Schneider

M&L switch piano, flush type, single pole, one way, 16 Amps, 230 Volts complete all as specified and as directed. Make: Havells / Legrand / Schneider

M&L socket outlet 5 Amps 2-in-1, 3/5 pin 230V AC flush type, complete all as specified and directed. Make: Havells / / Legrand / Schneider

M&L socket outlet 6/16 Amps 2-in-1, 3/5 pin 230V AC flush type, complete all as specified and directed. Make: Havells / / Legrand / Schneider

M&L switch piano, flush type, single pole, two way, 5/6 Amps, 230 Volts complete all as specified and as directed. Make: Havells / / Legrand / Schneider

M&L bell push, one way, 5/6 Amps, 230 Volts complete all as specified and as directed. Make: Havells / Cona / Anchor

M&L bell ding dong, one way, 5/6 Amps, 230 Volts complete all as specified and as directed. Make: Havells / Legrand / Schneider

S&F lamp Holder, insulated body with back plate, 230 Volts for batten fittings, complete all as specified and as directed. Make: Havells / Legrand / Schneider

S&F ceiling rose, 3 phase / PVC / Polycarbonate, isolated body complete all as specified and as directed.

S&F Electronic fan regulator, socket type, 100 W, AC, 230 Volts, complete all as directed. Make: Havells / Legrand / Schneider

S&F Modular switch single pole 1way, 6 Amps 1 Module, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F Modular switch single pole 1way, 16 Amps 1 Module, complete all as specified and directed Make: Legrand / L&T / Schneider

S&F Modular socket, 6 amps 2/3 pins, 2 in 1, combined 2 module, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F Modular socket, 6/16 amps 2/3/6 pins, 2 in 1, combined 2 module, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F Modular bell push, flush type, 5 Amps, 230 Volts complete all as specified and as directed. Make: Legrand / L&T / Schneider

S&F Modular bell electric multi music type, 230 Volts,single pole, complete all as specified and directed. Make: Legrand / L&T / Schneider

Modular fan regulator, step type 120 watts, 2 module, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F modular white cover plate with frame suitable for 6 to 8 Module complete all as specified and as directed. Make: Legrand / Havells / Anchor

S&F modular white cover plate with frame suitable for 4 Module complete all as specified and as directed.

Taking down ceiling fan / wall mounting fan ,any size and sweep from its position and transport to workshop for servicing, dismantling for servicing including removal of bearing,bushes,condenser, connector, flaxible cord,split pin etc if required removing old grease and refill fresh, lubricating bushes along with new washers, cleaning and washing fan blades, fan body etc with soap solution after repairing, re- assamble the same and transporting from workshop to any location in Army area Jodhpur and fixing to position / location as directed, connecting to electric system, testing etc complete all as specified and as directed . Note : -(i) Replacement of parts/rewinding shall be measured and paid separately (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store & taking down unserviceable/ defective parts. (iii) Item such as bearings, gun metal bushes, capacitor, shaft etc required for replacement shall be measured and paid seperately as supply only.

Taking down and transporting of exhaust fan 9" (230mm)/12" (300mm) / 15" (375mm)/ 18" (450mm) sweep from any location inside Army area to MES E/M Store Yard / Workshop for stripping of fan washing thoroughly of bearing / bush by petrol, washing / cleaning fan blade body etc thoroughly provision of new greasing replacement of worn-out / defective unserviceable parts (wherever necessary) assembling the same after defective / unserviceable parts is replaced including provision of twisted twin core flexible wire upto 0.7 mts long size 23/0.0076 (ISI marked) and re-fixing the same at the same location including making good disturbed surface including testing etc complete all as specified and as directed . Note : -(i) Replacement of parts/rewinding shall be measured and paid separately (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store & taking down unserviceable/ defective parts. (iii) Item such as bearings, bushes, capacitor, shaft etc required for replacement shall be measured and paid seperately as supply only.

S&F in replacement sheet metal enclosures comprising 2 pin earth plug socket, MCB SP 20 Amps (C-curve-10 KA) complete all as specified and as directed.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 4 way, 240V for fixing MCB's complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

Fixing Only factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,TPN 4 way, 240V for fixing MCB's, IP-43 protection, of any make and type, complete all as specified and as directed. Note:- Material shall be issued under Sch 'B' items.

Fixing only MCB SP ‘C’ Curve 10KA, 6 to 32 amps, of any make and type, complete all as specified and directed . Note:- Material shall be issued under Sch 'B' items.

Fixing only MCB SPN ‘C’ Curve 10KA, 40 amps, 240 V, of any make and type, complete all as specified and directed . Note:- Material shall be issued under Sch 'B' items.

Fixing only MCB SPN ‘C’ Curve 10KA, 63 amps, 240 V, of any make and type, complete all as specified and directed . Note:- Material shall be issued under Sch 'B' items.

S&F in repairs electronic driver upto 15 watt as per existing make of LED light fittings, complete all as specified and as directed.

S&F in repairs electronic driver upto 36 watt as per existing make of LED light fittings, complete all as specified and as directed.

Fixing only 4 Pole MCCB 100 Amps 16 KA, 415 Volt, of any make and type, including sheet metal enclosure powder coated finish and fixed flush in wall including making good to distrubed surface etc complete. Note:- Material shall be issued under Sch 'B' items.

Fixing only 4 Pole MCCB 125 Amps 16 KA, 415 Volt, of any make and type, including sheet metal enclosure powder coated finish and fixed flush in wall including making good to distrubed surface etc complete. Note:- Material shall be issued under Sch 'B' items.

Fixing only in repairs MCB SP ‘C’ Curve 10KA, 6 to 32 amps, of any make and type, complete all as specified and directed . Note:- Material shall be issued under Sch 'B' items.

Fixing only in repairs MCB SPN ‘C’ Curve 10KA, 40 amps, 240 V, of any make any type, complete all as specified and directed . Note:- Material shall be issued under Sch 'B' items.

Fixing only in repairs MCB SPN ‘C’ Curve 10KA, 63 amps, 240 V, of any make and type, complete all as specified and directed . Note:- Material shall be issued under Sch 'B' items.

Fixing only in repairs MCB TPN ‘C’ Curve 10KA, 63 amps, 240 V, of any make and type, complete all as specified and directed . Note:- Material shall be issued under Sch 'B' items.

Fixing only LED batten fittings 20/22 watt, branded make such as Havells / Surya / Phillips / Bajaj etc. including 01 nos tube rod, complete all as specified and as directed Note:- Material shall be issued under Sch 'B'

S&F LED light fitting 1X10W bulk head luminaries, 6000K, with lamp holders with all accesories internally and connectiong up with twin core twisted flexible copper conductor of suitable size, complete all as specified and as directed. Note:- Material shall be issued under Sch 'B' items.

S&F in repairs one bakelite sheet not less than 3 mm thick after removing all connection including cutting / chassing to accommedate existing fitment and making connection including cadmium plated screw with cup washer of 10" x 8", complete all as specified and as directed.

S&F in repairs one bakelite sheet not less than 3 mm thick after removing all connection including cutting / chassing to accommedate existing fitment and making connection including cadmium plated screw with cup washer of 7" x 5", complete all as specified and as directed.

S&F in repairs one bakelite sheet not less than 3 mm thick after removing all connection including cutting / chassing to accommedate existing fitment and making connection including cadmium plated screw with cup washer of 5" x 5", complete all as specified and as directed.

Supply only GLS coloured lamp red, green, milky, 0-60 watt, complete all as specified and as directed.

S&F in replacement PVC conduit 20/25 mm size, ISI marked, with all fittings, complete all as specified and as directed. Make:- Polycab / Plaza / Kalinga.

S&F in replacement PVC casing & capping, 25 mm size,( ISI marked), with all fittings, complete all as specified and as directed. Make:- Polycab / Plaza / Kalinga.

S&F in replacement polycarbonate transparent energy meter protection cover temper proof suitable for single phase energy, ISI marked, with all fittings, complete all as specified and as directed. Make:- Polycab / Plaza / Kalinga.

S&F in replacement pvc insulated and unsheathed FRLS single core multistrand copper conductor size 1.50 sqmm, drawn thrown in existing PVC conduit, complete all as specified and as directed. Make:- Polycab / Havells.

S&F in replacement pvc insulated and unsheathed FRLS single core multistrand copper conductor size 2.50 sqmm, drawn thrown in existing PVC conduit, complete all as specified and as directed. Make:- Polycab / Havells.

S&F in replacement pvc insulated and unsheathed FRLS single core multistrand copper conductor size 4.00 sqmm, drawn thrown in existing PVC conduit, complete all as specified and as directed. Make:- Polycab / Havells.

S&F in repair street light brackets made out of 50mm bore medium grade GI tubing, bent to shape of length 1.50 metre fixed with suitable size of clamps, nuts, bolts etc all as required at site, complete all as specified and as directed.. Note : The rate quoted inclusive of cost of clamps, nut bolts etc as required.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc, including taking down old existing earthing, complete all as directed by Engineer-in-charge. NOTE :- (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. Any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of lead wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

M&L cutting and taking out old burnt winding of 1200 mm sweep ceiling fan of any make and rewinding with same gauge of copper winding wire of superior quality and design to give same performance as per original fan's make, including insulation materials, cleaning, oiling, varnishing, fixing Bar bearing & etc and testing complete all as specified and as directed.

M&L cutting and taking out old burnt winding of 225 mm sweep Exhaust fan of any make and rewinding with same gauge of copper winding wire of superior quality and design to give same performance as per original fan's make, including insulation materials, cleaning, oiling, varnishing, fixing Bar bearing & etc and testing complete all as specified and as directed.

M&L cutting and taking out old burnt winding of 300 mm sweep Exhaust fan of any make and rewinding with same gauge of copper winding wire of superior quality and design to give same performance as per original fan's make, including insulation materials, cleaning, oiling, varnishing, fixing Bar bearing & etc and testing complete all as specified and as directed.

M&L cutting and taking out old burnt winding of 375 / 400 mm sweep Exhaust fan of any make and rewinding with same gauge of copper winding wire of superior quality and design to give same performance as per original fan's make, including insulation materials, cleaning, oiling, varnishing, fixing Bar bearing & etc and testing complete all as specified and as directed.

M&L cutting and taking out old burnt winding of 450 mm sweep Exhaust fan of any make and rewinding with same gauge of copper winding wire of superior quality and design to give same performance as per original fan's make, including insulation materials, cleaning, oiling, varnishing, fixing Bar bearing & etc and testing complete all as specified and as directed.

M&L cutting and taking out old burnt winding of400 / 450 mm sweep wall mounted fan of any make and rewinding with same gauge of copper winding wire of superior quality and design to give same performance as per original fan's make, including insulation materials, cleaning, oiling, varnishing, fixing Bar bearing & etc and testing complete all as specified and as directed.

M&L cutting and taking out old burnt winding of 600 / 1400 RPM heavy duty air circulated fan of any make, including replacement of bush / bearing of approved make and rewinding with same gauge of copper winding wire of superior quality and design to give same performance as per original fan's make, including insulation materials, cleaning, oiling, varnishing & etc and testing complete all as specified and as directed. Notes for item no. 71 to 84:- (i)- Makes for super enamelled winding wire - Devidayal / USHA / Chetak (ii)- Any u/s spare part required for replacement shall be measured and paid separately under respective item of BOQ (iii)- Ceiling fans / exhaust fans for rewinding / overhauling shall be carried out in E/M yard only. (iv)- If any ceiling / exhaust fan damage due to any reason during the repairing, the contractor shall be full respnsible for the same. (v)- The contractor will produce guarntee letter for rewinding of fan for duration of DLP.

Hanging only ceiling fan any size and connecting up including provision of cable from ceiling rose or connector to fan, including taking down old u/s fan complete all as specified and as directed.

Fixing only any size exhaust fan any size and connecting up including provision of cable from ceiling rose or connector to fan, including taking down old u/s fan complete all as specified and as directed.

Supply only ball bearing no. 6201 suitable for ceiling fan / exhaust fan of any sweep complete all as specified and as directed. Make:- SKF / NBC / TATA

Supply only ball bearing no. 6202 suitable for ceiling fan / exhaust fan of any sweep complete all as specified and as directed. Make:- SKF / NBC / TATA

Supply only ball bearing no. 6203 suitable for ceiling fan / exhaust fan of any sweep complete all as specified and as directed. Make:- SKF / NBC / TATA

Supply only gun metal bush suitable for ceiling fan / exhaust fan / wall mountaining fan of any sweep complete all as specified and as directed.

Supply only capacitor 2.5 MFD oil filled insulated with aluminium / PVC body after removing unserviceable capacitor suitable for ceiling fan of any sweep complete all as specified and as directed.

Supply only capacitor 4 MFD oil filled insulated with aluminium / PVC body after removing unserviceable capacitor suitable for ceiling fan of any sweep complete all as specified and as directed.

Supply and replacement of U clamp complete with nut bolt washer, split pin and rubber weal etc complete all as specified and as directed.

Supply and replacement of PVC canopy upper / lower side of standard / good quality including bolt with nut, lock nut and pin suitable for ceiling fans (any type / any sweep / any make) complete all as specified and as directed.

Supply and replacement of fan blades (set of three) of any make / type of ceiling fan of size 1200 sweep complete all as specified and as directed.

Supply and replacement of fan blades (set of three) of any make / type, suitable for exhaust fan 300 mm sweep, complete all as specified and as directed.

Supply and replacement of fan blades (set of three) of any make / type, suitable for exhaust fan 375 / 400 mm sweep, complete all as specified and as directed.

Supply and replacement of fan blades (set of three) of any make / type, suitable for exhaust fan 450 mm sweep, complete all as specified and as directed.

Supply and replacement of bracket with frame as per existing including fixing screws, suitable for exhaust fan 300 mm sweep, complete all as specified and as directed.

Supply and replacement of bracket with frame as per existing including fixing screws, suitable for exhaust fan 375 / 400 mm sweep, complete all as specified and as directed.

Supply and replacement of bracket with frame as per existing including fixing screws, suitable for exhaust fan 450 mm sweep, complete all as specified and as directed.

M & L spray painting of ceiling fan, fan blades, down rod, canopy etc with a coat of synthetic enamel paint of approved colour and quality including preparation of old painted surfaces, cleaning etc and printing the fan numbers etc with black paint complete all as directed by Engineer-in-charge. Note:- The work is to be carried out in E/M store yard to be entire satisfaction of Engg-in-charge.

M & L spray painting of exhaust fan (any sweep), fan blades, down rod, canopy etc with a coat of synthetic enamel paint of approved colour and quality including preparation of old painted surfaces, cleaning etc and printing the fan numbers etc with black paint complete all as directed by Engineer-in-charge. Note:- The work is to be carried out in E/M store yard to be entire satisfaction of Engg-in-charge.

S& F PVC stand for capacitor including connection etc., complete all as directed by Engineer-in-charge.

S& F louver made of MS sheet 3 mm thick for exhaust fan of size 9" to 18 ", complete all as directed by Engineer-in-charge.

S& F down rod 90 cm of 15 mm dia GI pipe "heavy duty" thread type with rubber bush, center bolt, nut, lock nut, "U" clamp suitable for thread end connection with cotter pin, complete all as directed by Engineer-in-charge.

S& F down rod 90 cm of 12 mm dia GI pipe "heavy duty" thread type with rubber bush, center bolt, nut, lock nut, "U" clamp suitable for thread end connection with cotter pin, complete all as directed by Engineer-in-charge.

S& F down rod 60 cm of 12 mm dia GI pipe "heavy duty" thread type with rubber bush, center bolt, nut, lock nut, "U" clamp suitable for thread end connection with cotter pin, complete all as directed by Engineer-in-charge.

S&F connecting PVC insulated copper conductor (FRLS) of size not less than 0.75 sqmm multistrand, unsheated cable up to the ceiling rose, length of cable 0.60 RM

Note for all above items:- 1. All items are for "Material and labour / Supply and fix" and to be executed in"Repairs" only incl taking down old materials unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are requested to quote their rates accordingly. 2. The contract amount shall be arrived at after deducting amount of "Schedule of Credit" from the Total quoted amount.

M/S SUMAN ENTERPRISES

Nvimal Engineers and Contractor

Bhawna Emporium

Nikhat nirman

Narendra General Suppliers