Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹95.9 LAccepted-AOC 96 SECTOR 16 A CHANDIGARH 160015 | CHANDIGARH | CHANDIGARH | 160015 | L1 | Accepted-AOC Admitted due to L1 bidder | |
| 2 | L2₹1.2 Cr+₹19.4 L (20.2%)Rejected-Finance | L2 | Rejected-Finance Rejected |
Tender Value
₹1.4 Cr
EMD Value
₹2.1 L
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF Tughlakbad
Commander Works Engineers Air Force, Tughlakabad PO Sangam Vihar New Delhi 110 080
PROVN OF CLEANING AND DE-PRESERVATION BAY FOR TV3 SERIES AERO ENGINE AY BRD AF STN CHANDIGARH UNDER GE(AF) MC CHANDIGARH
2023_MES_596011_1
84184/E8
Open Tender
Civil Works
Lump-sum
365 days
GE(AF) MC Chandigarh
As per NIT and tender documents
8 documents required · 8 mandatory
₹1,000
GE (AF) MC Chandigarh
₹2.1 L
Yes
5 Jul 2023
17 May 2023
14 Jun 2023
17 May 2023
12 Jun 2023
24 May 2023
Amount
Sch'A' Part-I (Building Works)
Lumpsum price worked out by the contractor for "Building work" as listed in Sch 'A' Part -I above/below the lumpsum price of Rs 48,86,515.49 as inserted by MES for Sch 'A' Part -I on srl page No 160.
Sch'A' Part-II (SITE CLEARANCE, EARTH WORK & EXCAVATION)
Lumpsum price worked out by the contractor for "Site clearance, Earth Work and Excavation" as listed in Sch 'A' Part II above/below the lumpsum price of Rs 1,57,418.52 as inserted by MES for Sch 'A' Part -II on srl page No 161
Sch'A' Part-III (WASTE DISPOSAL SUMP)
Lumpsum price worked out by the contractor for "Waste Disposal Sump" as listed in Sch 'A' Part III above/below the lumpsum price of Rs 1,38,135.43 as inserted by MES for Sch 'A' Part -III on srl page No 163.
Providing and laying in standard lengths(6 metre) High Density Polyethylene (H.D.P.E) Pipes, confirming to IS 4984:1995 and IS 7328:1992 (amended up to date), including necessary fittings complete all as specified and directed 110 mm nominal outer diameter (OD) HDPE pipe of material grade PE 80 / PN 6
Sch'A' Part-IV (ROAD(OLD&NEW), PATH AND HARDSTANDING)
Lumpsum price worked out by the contractor for "ROAD(OLD&NEW), PATH AND HARDSTANDING" as listed in Sch 'A' Part IV above/below the lumpsum price of Rs 32,52,854.00 as inserted by MES for Sch 'A' Part -IV on srl page No 168
Sch'A' Part-V (Internal Water Supply)
Lumpsum price worked out by the contractor for "Internal Water Supply" as listed in Sch 'A' Part V above/below the lumpsum price of Rs 31,873.53 as inserted by MES for Sch 'A' Part -V on srl page No 169 .
Sch'A' Part-VI (Lightening Protection)
Lumpsum price worked out by the contractor for "Lightening Protection" as listed in Sch 'A' Part VI above/below the lumpsum price of Rs 1,02,997.78 as inserted by MES for Sch 'A' Part -VI on srl page No 171 .
Sch'A' Part-VII (Solar Water Heating System)
Lumpsum price worked out by the contractor for "Solar Water Heating System" as listed in Sch 'A' Part VII above/below the lumpsum price of Rs 93,818.36 as inserted by MES for Sch 'A' Part -VII on srl page No 173.
Sch'A' Part-VIII (Internal Electric Supply)
Lumpsum price worked out by the contractor for "Internal Electric Supply" as listed in Sch 'A' Part VIII above/below the lumpsum price of Rs 2,01,137.25 as inserted by MES for Sch 'A' Part -VIII on srl page No 176
Sch'A' Part-VIII (A) (Internal Electric Supply)
Supply and fix metal flush box 8 module complete all as specified and directed.
Supply & fix LED High bay fitting 100 W, high efficiency round highbay in PDC housing suitable for industrial application. The luminaire should have efficacy of 100 lm/w and IP 66 complete all as specified and directed. Note: -The contractor shall submit purchse voucher for claiming payment in RAR/Final bill.
Chemical Earthing in repairs complete with copper earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 3.5 m deep below ground level) with top edge of plate not less than 2.5 m below normal ground level, earth pit filled with Magnesium Sulphate (Mg SO4) 15 cm all around the plate including connection with and including copper strip 32 x 6 as earth lead fixed by means of copper nuts, bolts, check nuts and washers etc and other end connected to the test point including 50 mm dia light grade GI protection pipe and watering pipe 20 mm dia med grade with funnel and wire mesh including necessary earth work, PCC earth pit chamber in PCC 1:2:4 using 20 mm graded stone aggregate with precast RCC pit cover 80 mm thick etc complete all as directed and specified. Note : 1. The earth value/result must be less than 1.0 ohms. 2. Rates of Copper strip and protection pipe upto 10 mtr is deemed to be included in the quoted rate.
Copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground
S&F raw water pump set of capacity 0.5 HP voltage range 180V-260V(1-PH)rated frequency 50Hz and maximum discharge is 1950LPH complete all as specified.
S&F electric chimney (industrial purpose) size 6000mm x 1200 mm having capacity of suction 1200 to 1250 cum/hr, auto clean with baffle filter including suction section of size 20' x 4 ' duly fabricated with GI sheet of 16 SWG and exhaust pipe of min 5 mtr length complete
Sch'A' Part-IX (External Electrc Supply)
Lumpsum price worked out by the contractor for "External Electrc Supply" as listed in Sch 'A' Part IX above/below the lumpsum price of Rs 67,148.80 as inserted by MES for Sch 'A' Part -IX on srl page No 177
Sch'A' Part-IX(A) (External Electrc Supply)
Supply, install, testing and commissioning of factory made LT panel (indoor type) of suitable size, CPRI approved double door type for LT distribution floor mounted, totally enclosed cubical type modular compartment, dust and vermin proof with neoprene gasket fabricated out of CRCA sheet of thickness 2.00 mm complete with bus bar chamber having openable front and rear shutters with suitable locking arrangements of shutters, duly powder coated. LT panel shall have angle iron frame 50x50x6 mm of 600 mm height to be embeded in PCC 1:2:4 not less than 300 mm complete including making connection of all incoming and outgoing cables with suitable size of lugs, glands etc and necessary earth work.all as specified and directed with the following components:-
Sch'A' Part-X (External Water Supply)
Lumpsum price worked out by the contractor for "External Water Supply" as listed in Sch 'A' Part IX above/below the lumpsum price of Rs 58,963.56 as inserted by MES for Sch 'A' Part -IX on srl page No 178.
Sch'A' Part-X(A) (External Water Supply)
Cutting of existing GI pipe 50/80 mm dia for making branch connection including inserting tee of suitable size complete all as specified and directed by Engr-in-charge
Sch'A' Part-XI (Pneumatic Supply)
Supply, laying and testing of Carbon Steel Seamless pipes for compressed air line , Grade (ASTM) A-106 Grade B ,Sch 40, laid in Duct/wall with flanged & welded joints including all fittings such as bends, unions, reducer, elbow, socket, tee etc. with packing nuts, bolts, washers and necessary connection wherever required, testing as specified, for 50 mm dia. bore pipe and testing complete all as speicfied and as directed.
All as per item No 11.01 herein above but for 15 mm dia bore size complete.
M&L for Cutting existing compressed air line of size 80 mm dia and making branch connection with suitable size of tee and jointing material complete all as specified and directed.
S&F valve butterfly S/S grade TP 304 complete of size 50 mm dia all as specified and directed.
All as per item No 11.04 herein above but for 15 mm dia bore size complete
shree balaji builders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .