Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.7 LAccepted-AOC 79B MIG PHASE 1 INDIRA PURAM G M S ROAD DEHRADUN UK PIN 248171 | DEHRADUN | UTTARAKHAND | 248171 | L1 | Accepted-AOC Acceptance of contract | |
| 2 | L2₹26.0 L+₹2.9 L (12.4%)Rejected-AOC 27 CHITRAKOOT ENCLAVE NEAR ANURAG NURSARY DEHRADUN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-AOC R | |
| 3 | L3₹26.6 L+₹3.4 L (14.8%)Rejected-AOC WING NO 7 2 10 PREMNAGAR DEHRADUN UK | L3 | Rejected-AOC R | |
| 4 | L4₹28.5 L+₹5.3 L (22.8%)Rejected-AOC INDEX NO E 1504 HQ CWE DEHRADUN 63 RAJA ROAD DEHRADUN | L4 | Rejected-AOC R | |
| 5 | L5₹29.7 L+₹6.6 L (28.3%)Rejected-AOC | L5 | Rejected-AOC R |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
22 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
WELCOME MAINT TO THE OFFICERS MD ACCN IN NORTH COMPLEX AT IMA DEHRADUN
2023_MES_598410_1
GE/IMA/T-28 2023-24 9319/E8
Open Tender
Support/Maintenance Service
Item Rate
330 days
GE IMA Dehradun
Refer NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA Dehradun
₹80,000
Yes
4 Jul 2023
25 May 2023
24 Jun 2023
26 May 2023
22 Jun 2023
8 Jun 2023
Amount
Preparation of old plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.
Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed.
Prepration of scrapped surface of wall / ceilling and applying 1mm to 1.5mm thick Asian acrylic damp proof wall care putty as per manufactur's instructions rubbing the surface till achieving smooth surface, complete all as specified and directed.
Prepration of surfaces of wall / ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. Note : The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Appex, Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.
Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls using mechanical means complete all as specified and directed. Note : The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Appex, Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.
Preparation of old plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.
Preparation of old plastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Cement based paint complete all as specified and directed. Note : The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Appex, Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.
Preparation of old painted wooden surfaces of any description over 10 Cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. Note : The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Appex, Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.
Preparation of old painted steel surfaces of any description over 10 Cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.
M&L preparation of old plastered surfaces & providing one coats of Plastic emulsion with approved shade complete all as specified and directed. Note : The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Appex, Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.
M&L for one or more coat of French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old surface, complete all as specified and directed.
S&F Drapery rod in any length, high strength stain less steel pipe with corrugated stain less steel extrusion having outer dia 28mm a pair of brackets, fixed in repairs complete all as specified and directed.Make:- Cera/Prayag/Shakti
S&F Decorative finals stainless steel in matching colour of rod, fixed in repairs complete all as directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm Sqm each complete all as specified and directed
Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n. exc 4.00 Sqm each complete all as specified and directed
Taking down steel window shutter n.exc 1 Sqm each and refixing in the same opening after replacement of broken hinges including welding,grinding, painting etc each complete all as specified and directed.
Taking down shutter of any description n exc 1 Sqm each complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.
M&F for 2nd class, hard wood, plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
Preparation of wood or wood based materials new or old of any description and girth and treated with two coat of creosote complete all as specified and directed.
M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete all as specified and directed.
M&L for Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
M&L for MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed
M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bed blocks etc for embedding hold fasts complete all as specified and directed.
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as specified and directed.
S&F 35mm thick 2nd class H.W. factory made plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.
S&F 35mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.
S&F 30mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed.
S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.
S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with out glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.
S&F Steel ventilator factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.
S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed
S&F factory made 30mm thick flush shutter solid core construciton with partical board core and plywood face panels commercial type on both sides complete all as specified and directed.
S&F Butt hinges, 100mm long, medium weight, stainless steel complete all as specified and directed.
S&F Butt hinges, 100 mm long, extruded aluminium alloy,with mild steel hinge pin anodised complete all spacified as directed.
S&F Butt hinges, 75 mm long, medium weight, stainless steel omplete all as specified and directed.
S&F Butt hinges, 50 mm long, medium weight, stainless steel complete all as specified and directed.
S&F 250mm long stainless steel sliding door bolts, stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate complete all as specified and directed
S&F 250mm long stainless steel sliding door bolts, stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate fixed in repairs complete all as specified and directed.
S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.
S&F 100mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.
S&F 100mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed
S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed
S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed.
S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat in repair complete all as specified and directed.
Preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 Cm in length, thickness of metal to be welded exc 9 mm and nexc 20 mm complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples in repairs complete all as specified and directed.
Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed.
S&F 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, complete all as directed.
Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Prepration of primed surfaces of wall / ceiling and applying one coats of ( weather coat exterior paint) complete all as specified and directed. (work to be carried upto a height of 7.5m) . Make:- Asian/Berger/Nerolac. Note : The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Appex, Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removal of unserviceable tiles out side IMA premises, complete all as specified and directed.
M&L for Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 for receiving wall tiles.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.6 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in same colour grout to match complete all as directed.
M&L for Virfied glazed coloured tiles 8-9mm thick (Square or rectangular) polished,area of each tile exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in same colour tile grout to match complete all as specified and directed. Note :- Coloured as approved by Engineer -in - charge.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in same colour tile grout to match complete all as directed.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in same colour tile grout to match complete all as directed.
M&L for Glazed ceramic coloured tiles of size 450X300X6-7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same colour tile grout to match complete all as directed.
Demolition of brick work, built in cement or cement lime mortar including removal out side IMA premises, complete all as specified.
M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks (except bricks) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) complete all as specified and directed.
M&L for Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc including removal out side IMA premises complete all as specified and directed.
M&L for 15mm thick ready mix external cement plaster on brick, concrete surfaces and Ceiling including providing & mixing water proofing compound as per manufacturers specification, surface finished even & fair, finishing curing scaffolding etc complete all as specified and directed. Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom)/Unicrete.
M&L for Cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concilled conduit wiring, etc and making good exceed 20 cm girth in brick walls complete all specified and directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15mm bore of pipe.
S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20mm bore of pipe.
S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.
Dismantling stone slab & tiles of any description or thickness, in floor, aprons etc, laid dry & pointed.
M&L for black marble work 18 to 20 mm thick (table rubbed and polished) as in flooring, steps, cooking platform and like with and including 20 mm thick cement screed bed in cement mortar 1:6 and pointing withsame colour grout to match with shade of slab including rounding of edges of udaipur green stone complete all as specified and directed.
S&F Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repairs complete all as specified and directed.
S&F Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, complete including CP jet with necessary PVC pipe fittings fixed in repair complete all as specified and directed.
S&F Vitreous china wash basin, white, flat back, size 550x400mm including bracket fixed in repairs complete all as directed.
S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repairs complete all as specified and directed. Make:- Cera/Hindware/Parryware.
S&F Stainless steel plate rack of size 31 inch X 36 inch X 10 inch fixed in repairs complete all as directed. Make :- Make:- Blue star/Nirali/Cera
S&F 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make:- Jaquar/Cera (Victor series)/ Prayag (7000 series)
S&F Chromium plated pillar cock rocket type with areator 15mm dia screwed for iron pipe or brass ferrule, fixed in repairs complete all as specified and directed. Make:- Jaquar/Cera (Victor series)/ Prayag (7000 series)
S&F 15mm dia chromium plated concealed stop cock, heavy body with cap fixed in repairs complete all as specified and directed.
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60 Cm long. Fixed in repairs
S&F Corner glass shelf assembly with bracket complete all as specified and as directed.
S&F in repairs of toilet paper holder of stainless steel fiexed to walls with chromium plated brass screws. Make:- Cera/Jaquar/Prayag
S&F in repairs Vitreous china coloured cascade floor mounted single piece closet P/S trap,KALAHARI cistern Shell and lid, dual flush, premium range, complete set incl flushing cistern PVC sheet cover, jet pressure and connected fitting but excluding sensor, CAT Pt Nos cera S1013157, 1013157 or equialent in Hindware/Parryware.
S&F CP brass hot & cold mixer cast copper alloy with centre hold for WHB and long shank fancy type 15m bore complete all as directed by Engineer-in-charge. Make : Jaquar/Cera (Victor series)/Prayag (7000 series)
S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flengs in complete all as specified. Make :- Jaquar/Cera (Victor series)/Prayag (7000 series)
S&F CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy. Make :- Jaquar/Cera (Victor series)/Prayag (7000 series)
S&F CP fancy type twin Angle valve 15mm dia (angle cock) cast copper alloy. Make : - Jaquar/Cera (Victor series)/Prayag (7000 series)
S&F CP brass shower rose fency type 50mm dia with extension Arm pipes CP Make : Jaquar/ Cera/Prayag
S&F in repair CP Helth fauset telephonic type with CP flexible pipe . Make : Jaguar/Cera/Prayag.
M&L for 18mm thick one side prelaminated colour HDMR Sheet for Kitchen cup board shutter and frame & fixed at site,including mica lamination on one side colour as approved by Engr - in - Charge complete all as specified and directed. Note :- Board edges properly finished with strip on band edges.
S&F Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repairs complete all as specified and directed. Make :Hexa, Hettich, Hafele, Godrej
S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, five layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.
S&F Ball valve 15mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as specified and directed. Make:- Prayag/Shakti/Cera
S&F Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as specified and directed. Make:- Prayag/Shakti/Cera
S&F in repairs 8 mm thick HDF laminated wooden Flooring over and including 2 mm thick Foam sheet over a layer of polythene film sheet over finished top finished floor and including skirting complete all as specified and directed to wooden flooring defective portion by dismantling and replacing with new one to match with existing wooden floor inclusive all necessary items required for replacement of existing defective wooden flooring, skirting and threshold pieces as required complete all as directed by Engr in Charge.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including cutting chasing in brick work and half rounding of marbel in front face of self including taking down existing shelf and cutting chasing and repair for inserting marble shelfs complete all as specified and directed.
S&F Vitreous china Counter top wash basin, white, fixed in repair including pillar tap complete all as directed.Make : Jaquar/ Cera/Hindware.
S&F Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or inclulding fixing cantilver brackets and connecting union to pipe overall size 405mm x 460mm x 203 mm bowl size 405 mm x354mm x 203mm fixed in repair complete all as specified and directed. Make :- Make:- Prayag/ Blue star/Nirali/Cera.
S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.
S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.
S&F PVC branch pieces single ordinary or inverted or with parallel branches 110mm dia fitted with oval access doors fixed in repair complete all as specified and directed.
S&F PVC branch pieces single ordinary or inverted or with parallel branches 75 mm dia fitted with oval access doors fixed in repair complete all as specified and directed.
S&F PVC bends fitted with oval access doors 75 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.
S&F PVC bends fitted with oval access doors 110 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.
S&F PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.
S&F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.
S&F in repairs Sandwitched PVC wall lining 5 mm thick wood grain printed coloured PVC sheet inclusive of PVC beads and angles at corners /edges and fixing at site with nails fixed in repair complete all as specified and directed.Make:- Reyna/Glove/Height
S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed.
S&F in repair Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with hole for waste pipe complete all as specified and directed. Make:- Cera/Prayag/Shakti.
Taking down carefully existing aluminum/copper surface/concealed point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, holders and making good the disturbed surfaces in cement mortar 1:3 of walls, floors, ceiling etc including distempering to match with existing surfaces complete all as specified and directed.
S& F modular fitting /fixture in repairs including taking down old unsv fitting/fixture of following specification : Make: Anchor/Havells/Indo Asian
Fan regulator modular step type 120W 240 volts 2 module.
Modular switch single pole one way 6/10 Amp 240 volts.
Modular switch single pole one way16/ 20 Amp 240 volts .
Modular socket outlet 2/3 pin combined 6/10 Amp 240 volts.
Modular socket outlet 2/3 pin combined 16/ 20 Amp 240 volts.
Modular bell push flush type, 6 Amps240Volts.
S&F in repairs white modular cover plate with frame of following module complete including taking down old unsv modular cover plate with frame all as directed. Make: Anchor,Indo Asian, Havells
1Module
2Module
3Module
4Module
6Module
8 Module
12 Module
S&F in repairs modular metal flush box of following module complete including taking down old unsv modular metal flush box with frame all as directed. Make: Anchor, Indo Asian, Havells
1Module
2Module
3Module
4Module
6Module
8 Module
12 Module
Taking down carefully existing surface /conceled light fitting from any height of any wattage /description by disconnecting the wire and set aside insafe custody for reuse and refixing in same postion after completion of work all as specified and directed. Note : Rate for minor spare required at the time refixing i.e Tube light clip ,Coonecting wire shall deemed to be inclusive in the quoted rate.
Taking down carefully existing ceiling fan from any height of any capacity/description by disconnecting the wire and set aside insafe custody for reuse and refixing in same postion after completion of work all as specified and directed. Note : Rate for minor spare required at the time refixing i.e safety pin, rubber reel, fan clamp , nut bolts ,Conection wire shall deemed to be inclusive in the quoted rate.
Taking down carefully existing Exhaust Fan /Cabin fan /wall mounted fan from any height of any capacity/description by disconnecting the wire and set aside insafe custody for reuse and refixing in same postion after completion of work all as specified and directed. Note : Rate for minor spare required at the time refixing i.e nut bolts , gresing of exhaust fan shall deemed to be inclusive in the quoted rate.
Taking down carefully existing storage type water heater from any height of any capacity/description by isolating electric/water supply and set aside insafe custody for reuse and refixing in same postion after completion of work all as specified and directed. Note : Rate for minor spare required at the time refixing of geysers i.e Fasteners , PVC connection ,sefety valve ,plug top, AC Top, shall deemed to be inclusive in the quoted rate .
Taking down carefully existing surface conduit /casing caping wiring ( LP,FP,Socket point etc) including fitting /fixture such as ceiling rose, tube light fitting ,switch boards with switches /sockets from site carefully from any height by disconnecting the wire and set aside insafe custody for reuse and refixing in same postion after completion of repair work all as specified and directed. Note : Rate for minor spare required reixing the conduit and casing caping or fitting /fixtures (such as brass screw ,with cup and washer ,gitti, gypsum scre , batten nail, PVC saddle) at site , shall deemed to be inclusive in the quoted rate
S&F in repairs ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body including taking down old unsv ceiling rose complete all as directed. Make: Anchor Penta PC, Havells (Reo)/SSK
S&F in repairs Electronic steppped type fan regulator 100 watt 230 volts AC 50 Hz including taking down old unsv fan regulator complete all as directed. Make:Anchor Penta PC, Havells (Reo)/SSK
S&F in repairs Batten holder, PVC/polycarbonate type with back plate suitable for batten fittings including taking down old unsv batten holder complete all as directed. Make: Anchor Penta PC, Havells (Reo)/SSK
S&F in repairs switch piano, flush type, single pole one way 6 Amp including taking down old unsv switch complete all as directed. Make: Anchor Penta PC, Havells (Reo)/SSK
S&F in repairs switch piano, flush type, single pole one way 16Amp including taking down old unsv switch complete all as directed. Make: Anchor Penta PC, Havells (Reo)/SSK
S&F in repairs socket out let, multipurpose, 2 in 1 5 pin, 6 Amp including taking down old unsv socket complete all as directed. Make: Anchor Penta PC, Havells (Reo)/SSK
S&F in repairs socket out let, multipurpose, 2 in 1 5 pin, 16 Amp with fuse and neon indicator including taking down old unsv socket complete all as directed. Make:Anchor Penta PC, Havells (Reo)/SSK
S &F in repairs Bakelite sheet cover 3 mm thick cut as required shape and size including brass screws and cup washer off following size for mounting swich, socket fan regulator etc including taking down existing unserviceable bakelite sheet cover complete all as directed. Make: Hylam, Woodlite, Havells.
S & F in repairs pressed steel sunken terminal boxes 1.6 mm thick, 60 mm including brass screws and cup washer of following size for mounting switch, socket fan regulator etc including taking down existing the existing unserviceable sunken terminal boxes complete all as directed.
Material and labour for Earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.
Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in nincluding non rigid PVC Conduit concealed in wall with all fitting and fixing accessories and 1.5 Sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box of required size factory made for mounting Modular switch, regulators etc with and including Modular cover and frame , ISI marked, for the following. Make of wire:Havells/ Polyacab /Anchor Make of conduit: AKG Plastic Pvt Ltd./Bhagwati Plastic & Agriculture industry /Polycab Note : (i) Point wiring & earth wire shall be connected to each & every sunken box. (ii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.
One light point controlled by one, one way 6 Amp modular switch.
One fan/exhaust fan point controlled by one, one way 6 Amp modular switch.
One 5 pin 5/6 Amps socket outlet point on the same board
One 5 pin 5/6 Amps socket outlet point on independent board
One bell point controlled by one, one way 6 Amp button switch.
Description all as per item No. 134 here-in-before but point wiring with 4 Sq mm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 4 Sq mm PVC insulated multistranded copper conductor cable as continous earth wire.
S & F Modular switch single pole one way 6 Amp fixed complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)
S & F for Modular switch single pole one way 16 Amp complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)
S & F Modular socket outlet 2/3 pin combined 6 Amp 240 volts fixed complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)
S & F Modular socket outlet 2/3 pin combined 16 Amp 240 volts complete all as directed. Make: Anchor, Legrand, Crabtree (Havells)
S & F fan regulator modular step type 120W 240 volts 2 module type complete all as directed. Make: Anchor, Bajaj, Crompton, Havells
Supply and fix LED batten light fitting of lumens 2500 lumens wall mounted ,high pressure die cast alluminium, fully diffused ,polycarbonated diffuser,inbuilt electronic driver IP-20 ,high bright LED lamp, colour temp not less than 5700 COOL DAY Light,colour rending index not less than 80 ,life not less than 20000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz, surge protection minimum 2.5KV including taking down old unsv T/L of any capacity all as specified and directed . Make: - PHILIPS/ECOLINK/EVEREADY/CROMPTON
Supply only LED batten light fitting of lumens 1200 lumens wall mounted ,high pressure die cast alluminium, fully diffused ,polycarbonated diffuser,inbuilt electronic driver IP-20 ,high bright LED lamp, colour temp not less than 5700 COOL DAY Light,colour rending index not less than 80 ,life not less than 20000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz, surge protection minimum 2KV including taking down old unsv T/L of any capacity all as specified and directed . . Make: - PHILIPS /ECOLINK/EVEREADY/CROMPTON
Metal finish wall light with maximum bulb wattage 9/12watt, base of the lamp should be E27, colour of the fixture is white & silver wsith chrome finish and having rectanguar shape for aesthetic look. dimension of the fixture should be 125 x 150 x 240 mm and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable. Make: Philips / Havells/Crompton.
S & F in repair MCB DB complying with IEC 61439 -1 & 3., sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on Din channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed. All the above mentioned specs the technical documents from OEM shall be provided at the time of bidding of following capaity . Make:- Havells/HPL/Indo Asian.
12way SPN DB
16 way SPN DB
S & F in repair MCB SP complying to IS/IEC 60898, 240 volts 'C' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including blanking plate ,connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. All the above-mentioned specs technical documents from OEM shall be provided at the time of bidding of following capaity. Make:- Havells/Indo Asian/HPL.
MCB SP6 to 32 Amp.240 volts
MCB SP 40 to 63 AMPS 240 volts
MCB SPN 6 to 32 Amps 240 volts
MCB SPN 40 to 63 Amps 240 volts
S & F sub main wiring with PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in and including rigid PVC conduit in concealed / surface as required at site including one run PVC insulated unsheathed cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB including taking sown old unsv submain wiring of following sizes complete all as specified and directed. Make:- Polyacab, Havells, Anchor Note:Two/Four run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc. (iii) Phase sequence colour code must be follow i.e Phase( Red) and Neutral ( Black) In colour and for three Phase RYB For phase and black for neutral.
2 x 6 Sqmm + 1 x 6 sqmm
2 x 4Sqmm + 1 x 4 sqmm
Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in existing Conduit concealed in wall with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box of required size factory made for mounting Modular switch, regulators etc with and including Modular cover and frame , ISI marked, for the following. Make of wire:Havells/ Polyacab /Anchor Make of conduit: AKG Plastic Pvt Ltd./Bhagwati Plastic & Agriculture industry /Polycab Note : (i) Point wiring & earth wire shall be connected to each & every sunken box. (ii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.
One light point controlled by one, one way 6 Amp modular switch.
One fan/exhaust fan point controlled by one, one way 6 Amp modular switch.
One 5 pin 5/6 Amps socket outlet point on the same board
One 5 pin 5/6 Amps socket outlet point on independent board
One bell point controlled by one, one way 6 Amp button switch.
Description all as per item No. 147 here in before but point wiring with 4 Sq mm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 4 Sq mm PVC insulated multistranded copper conductor cable as continous earth wire.
Modular bell push flush type, 6 Amps240Volts.
S & F sub main wiring with PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing inin existing conduit including one run PVC insulated unsheathed cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB including taking sown old unsv submain wiring of following sizes complete all as specified and directed. Make:- Polyacab, Havells, Anchor. Note:Two/Four run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc. (iii) Phase sequence colour code must be follow i.e Phase( Red) and Neutral ( Black) In colour and for three Phase RYB For phase and black for neutral.
2 x 6 Sqmm + 1 x 6 sqmm
2 x 4Sqmm + 1 x 4 sqmm
Taking down carefully existing switch board including acessories such as switches, sockets ,regulators of any capacity/description disconnecting the wire and set aside insafe custody for reuse and refixing in same postion after completion of work all as specified and directed.
M/S PUNDIR BUILDERS
M/S S P BUILDERS
Amit Traders
G S CONSTRUCTIONS
Sharda Enterprises
Bidder Name
G S CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .