Providing Passenger Lift (01 Nos) in Taluka Court Building at Valod Dist. Tapi

Name Of Work : Providing Passanger lifts (01 No.) in Taluka Court Building at Valod, Ta. Vaod, dist. Tapi

Qty. Unit Item Per Amount

In Figure In Words

1 Nos. 1 Supplying, Erecting, Testing & 1575617.17 Rupees Fifteen Nos

Commissioning the passenger / stretcher lift Lakh(s) Seventy .

having following main features: Five Thousand

Paise Seventeen

[1] GEAR LESS LIFT DRIVE (MRL)

comprising of High Starting torque Lift

phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with

high efficiency shall be used.[2] Micro

processor based / PLC, ACVVVF, vector

control drive with encoder feedback closed

loop system shall be used for lift car and

door operation which shall be full collective

selective operation hall call demand

response, UP/DOWN hall stops, Main, Up/

Down Contactor with overload and phase

reversal relay and safety controls.

[3] Car with M S platform with bracings of

adequate size and to sustain the impact load

cabin + passenger with safety factor of fire

for steel and side panels of Stainless steel of

sheet of grade 304 duty. Car ceiling will be

S.S. finishes with aesthetic appearance with

LED ceiling lights. Car flooring shall be of s/s

304 chaker plate design sugeested of

engineer in charge. of engineer in charge. Car

doors shall be of stainless steel grade

hairline finish with centre opening /

telescopic automatic doors. Car panel will

also be S.S. 304 finished with emergency

stop device, mechanical door safety device,

facility of auto/ attended mode. All car panel

buttons and all floor switches must be with

brail language as per lift act..

blank schedule-b Fast Track lift (2) Page 1 of

Qty. Unit Item Per Amount

In Figure In Words

[4] All landing doors must be fire rated for

hour shall be fully automatic centre opening/

telescopic opening made of hairline finish

steel grade of 304 with key holes and

infrared curtains with Unlocking facility

[5] Appropriate battery operated emergency

light in the car along with alarm switch shall

be provided. Also, Emergency Light & Fan

should start immediately without any Time

Delay as soon as power fails.

[6] Digital scrolling indicator system for up-

down arrow along with floor position

indicator shall be provided inside the car

and at all floors.

[7] Full height infra red curtain with multiple

cross / crossing light beams shall be

[8] Automatic Rescue Device (ARD) shall be

provided accordingly of passenger capacity

with Manual Rescue Operation ( Manual

Cranking Facility).

[9] Audio visual indication in the lift car

showing over loading shall be provided such

that doors kept open till excess load is

[10] Spring buffers/PU Buffers shall be

[11] Car fan as per passenger capacity with

automatic sleep timer shall be provided.

[12] Voice annunciator with suitable music

shall be provided in lift car.

[13] Self diagnostics system for operational

and safety parameters shall be provided in

[14] Mechanical over speed governor with

governor calibration as per actual site

parameters and submission of calibration

certificate submission, door key holes in the

floor doors, fireman switch shall be

[15] Lift machine hoisting arrangement in

the lift machine room and monkey ladder for

lift pit should be provided by the lift agency,

along with the other steel structure works,

foundations for the machine etc…

[16] In the hoist way fascia plate shall be

provided without any extra cost, where ever

required as / if directed by engineer in

blank schedule-b Fast Track lift (2) Page 2 of

Qty. Unit Item Per Amount

In Figure In Words

[10] Spring buffers/PU Buffers shall be

[11] Car fan as per passenger capacity with

automatic sleep timer shall be provided.

[12] Voice annunciator with suitable music

shall be provided in lift car.

[13] Self diagnostics system for operational

and safety parameters shall be provided in

[14] Mechanical over speed governor with

governor calibration as per actual site

parameters and submission of calibration

certificate submission, door key holes in the

floor doors, fireman switch shall be

[15] Lift machine hoisting arrangement in

the lift machine room and monkey ladder for

lift pit should be provided by the lift agency,

along with the other steel structure works,

foundations for the machine etc…

[16] In the hoist way fascia plate shall be

provided without any extra cost, where ever

required as / if directed by engineer in

[17] Permanent wiring with necessary safety

devices like RCCB in all circuit, Over Voltage

Under Voltage protection and THD

eliminator in circuit for lift machine room

and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug

points shall be provided by the agency. Only

3 phase Power Supply shall be made

available by department in lift machine

room. Necessary Earthing as per Lift

Act/Rules shall be arranged by Lift Agency.

[18] Any civil/ electrical works for

additional and alteration in lift shaft and

machine room related to erection of lift shall

be made by lift agency without any extra

cost. (granite/marble fixing around all

landing door openings are not in lift

agency’s scope.)

[19] Agency has to provide all working

drawings and documents and liaison

services for obtaining all necessary

permission from lift inspector and other

authorities. [20] acrylic transparent

licence/display A4 size holder in lift cararent

licence/display A4 size holder in lift car

blank schedule-b Fast Track lift (2) Page 3 of

Qty. Unit Item Per Amount

In Figure In Words

[20A] As per statutory requirement of Govt.

Of Gujarat lift & escalator act 2000, lift

agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground

4.carrying out third party lift inspection

during/after lift erection and provide report

by third party authorized by concern

licensing authority 5.agency has to provide

third party insurance upto completion of

free maintenance period and submit the

document for the same.

[21] Car Panel Operating Buttons with floor

position indicator/buttons must be of Auto

Glow type clearly visible when view from

[22] For Physically Handicapped person Full

Length Handrails of hairline finish steel

grade of 304 should be provided at

appropriate height on the Rear & Side Wall

Panels in Lift Car. [23] With Necessary KVA

rating voltage controlled Stabilizer suitable

for your controller, drive and all equipments

[24] Necessary rating of DP Elcb and FP Elcb

required for lift is in scope of work which

rating is sugested by CEICED Department

(electrical Inspector)

(B) SPECIAL FEATURES DESCRIPTION OF

LIFTS for PREMIUM category

1. Advanced control system dual 64 bit

embedded microprocessor with CANBUS

Serial Communication mode including

Regenerative power efficient operation,on

site programming facility, Anti nuisance, Pte-

opening, BMS/RMS with necessary online

real time monitoring system having

necessary connectivity for remote

monitoring & other suitable supporting

hardware & software devices to fulfil the

2. Floor Indication LCD Display with call

registration & brail mark with arrival gong

and hall lantern & TFT Screen in the car with

MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS

Moonrock finish / Hair Line / Honeycomb

for car and all Doors, All landing doors must

have fire rating up to 2 hours and car door

must have multi-level crisscross beam door

4. To & fro communication system & wiring

(i.e. car , control room & guard room ) and

Each elevator are equipped with remote

monitoring system.agency has to provide

mobile app and user id and password for

blank schedule-b Fast Track lift (2) Page 4 of

Qty. Unit Item Per Amount

In Figure In Words

8/10 Passengers, Ground plus 3 upper floor

with Rated Speed of 1.0 m/sec.(C) With

General PLUS ADDITIONAL SPECIAL

FEATURES attached herewith. Prem. Cat.

Deputy Executive Engineer Executive Engineer

Electrical (R &B) Sub Division, Electrical (R &B) Division,

Total Rs. In Words

I am / We are willing to carry out the work at _ _ ___ ___% below ___________________________

___________________________________% (Should be written in figure and words) of the estimate rates mentioned above. Amount

of my/our tender work out as under.:

(A)Total Tendered Amount. Rs.__________________

(B) Rebate on above tender amount (if any)___________% (In Figure) Rs.__________________

(C) Net Tendered Amount ( A-B) Rs.__________________

(a) I/We hereby declare that I/We have visited the site and fully exquisite myself/ourselves with the

local situation regarding materials, labour and other factors pertaining to work before submitting tender.

(b) I/We hereby declare that I/We have carefully studied the conditions of contracts, Detailed

specification and other tender document of this work and agree to execute the same accordingly.

Note 1) The Rates are inclusive of all taxes, transport charges, GST and storage charges upto date.

2) The materials covered under contract should be got approved from the Dy. Executive Engineer, in charge of the

3) The materials and work shall have to be used and carried out as specification in technical note.

4) All works shall be carried out as per public works Department hand book and Other specifications of the Dn. Or

5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from the

5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from the

6) The material to be used in this work should be approved strictly from Engineer-in-charge / Deputy Ex.

Engineer as applicable.

7) The agency will have to agree to carried out the work as per brand demand of concern deptt.

(Signature of Contractor)

blank schedule-b Fast Track lift (2) Page 5 of