ELECTRICAL WORKS AT NEHRU PARK

Supplying and fixing following rating, four pole, (three phase and neutral) 415V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testin9 and commissioning etc. as required. 63 A four pole 30mA, RCCB

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A Four pole lsolator

Supplying and fixing following rating, four pole, 415 V, isolator in the E xisting MCB DB complete with connections, testing and commissioning etc. as required. 100A Four pole lsolator

Supplying and fixing 5 A lo 32 A rating, 240 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB completewith connections, testing and commissioning etc. as required. Single Pole MCB

Supplying and fixing 5 A to 32 A rating, 240 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB completewith connections, testing and commissioning etc. as required. Tripple Pole MCB

Supply and installation of three phase double cover dust and vermin proof enclosure ol Vertical DB including copper/brass bus bar neutral link and DIN bar provision for fixing 4P MCB I lsolator/ RCCB/ as incomer and SP/ TP MCB as outgoing (IP 42/43) and including providing blanking plates in the blanking slots ,fixed on wall making good the damages, colour washing etc.as required DB 8 way (8+ 24), Double door

Supplying, drawing and connecting of one number the following size FR LS. PVC Insulated and PVC sheathed round cable with copper conductor of 1.1 KV grade for interconnecting etc complete. 2core 1.5 sq.mm (48/0.20 mm)

Trench for laying HDPE Pipe : Trench shall be excavated in reasonably straight line, having minimum width of 30Omm & minimum depth of 750mm. The bottom of the trench shall be level, free from stones, brick bats etc. The cable shall be laid at the bottom of the trench and the trench shall be then back-filled with excavated earth free from stones or other sharp ended debries and shall be rammed as required to complete the laying.

Supply and laying of double wall corrugated HDPE pipe of size 50/38mm of reputed make like REX in the existing trench with all accessories couplers etc as required

Supplying and laying of low tension underground cables as detailed hereunder: Supply of 1.1KV grade, 3.5/4 core, XLPE insulated, PV outer sheathed, with flat strip armoured, with aluminium conductor confirming to IS 7098 : part I - 1988. The cable shall be pulled through the HDPE Pipe laid in the trench. 4 C x 16 sqmm

Supplying and laying of low tension underground cables as detailed hereunder: Supply of 1.1KV grade, 3.5/4 core, XLPE insulated, PV outer sheathed, with flat strip armoured. with aluminium conductor confirming to IS 7098 : part I - 1988. The cable shall be pulled thFOU9h !h HOPE Pipe laid in the trench. 4 C x 6 sqmm

Supplying and laying of low tension underground cables as detailed hereunder: Supply of 1.1KV grade, 3.5/4 core, XLPE insulated, PV outer shea thed, with flat strip armoured, with aluminium conductor confirming to IS 7098 : part I - 1988. The cable shall be pulled through the HDPE Pipe laid in the trench. 3.5 C x 90 sqmm

Supplying nickel plated compression brass cable gland and aluminium lugs for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 4 core cable of the following sizes as required. 4C X 16 Sq.mm. (25mm)

Supplying nicket plated compression brass cable gland and aluminium lugs for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 4 core cable of the following sizes as required. 4C X 6 Sq.mm. (22mm )

Supplying nickel plated compression brass cable gland and aluminium lugs for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 3'7 core cable of the following sizes as required. 3.5 C X 9S Sq.mm. ( 30 mm )

Supplying and fixing of junction box weather proof type (make Sintex IP 67) of following size with silicone weather proofing sealant, and fixing single phase 6A Tripple Pole connector . Size 200x140x100 mm

Supplying and fixing of junction box weather proof type (make Sintex IP 67) of following size for fixing MCB . Size 650x350x100 mm

Supply and fixing of 20 W LED lamp. etc complete. ( Model Crompton, Bajaj, Philips, Hazells, Wipro)

Supply and fixing Copper bonded plate and pipe 2x2 for earth connction etc as required

Supply and laying of 3.0mm ( 10 SWG ) hot dip galvanized wires along with cable including termination with GI thimble etc as required.

Supply and drawing 3.0mm dia copper conductor in surface/ recessed etc for earthing. as required

Providing independent ordinary pipe earthing using 1.50 mtrs of 40 mm dia GI pipe ,earth wire copper and other specials such as common salt ,charcoal bolts and nuts etc. complete required at site.

Supply and installation of Feeder Pillar for High Mast, mounted on angle iron frame 32A TPN MCB incomer, 32A 4P RCCB,singIe dial time switch 25A TP contactor for the automatic switching of luminañes, power too control with 2 no 9A contactors and raise lower push button. Incoming 35 sq, mm and out going 16 & 2.5 sq. mm terminals including providing provision to mount 1 no 3 phase energy meter in a separate compartment along with supply of 32 A cut out fuses, bakelite sheet for mounting the meter etc. as required.

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -Sstar rated ceiling fan ( Model Crompton. Bajaj, Usha, Havells, Orient) complete with 300mm down rod, canopies, shackeles and blades etc complete.

Supply and fitting cast alluminium stove enamelled elliptical shape bulk head 10W LED light with front clear glas. ( Model Crompton, Bajaj, Philips Havells, Wipro) fixing to wall including giving connections etc complete.

Foundation of size column 450x450x1000mm, in :2:4 cement concrete for 5 M pole Including all materials and labour charge of earth work excavation with positioning of foundation bolts and providing 50mm dia PVC pipe of suitable length for cable entry as required etc complete. In all respect as per approved drawin9 and direction of engineer-in -charge.

Supplying. installing, testing and commissioning LED Street light ( Mode Bajaj, Philips, Crompton ) 45W, 240V, 50Hz made up of pressure die cast aluminium housing with toughened glass with individual high power LEDs with secondary optics having TOP OPENING/accessible driver compartment having IP66 protection and impact resistance of IK07.The LED should be fixed on die-cast extruded aluminium heat sink for proper thermal management with Manufacturer name engraved /embossing in housing to allow traceability till life of fixture (stickering and printing is not acceptable)

Supplying, drawing and fixing of one number 1.5 sq.mm (48/0.20 mm) three core Isl Marked FR LS, PVC Insulated and PVC sheathed round copper conductor cable of 1.1 KV grade for interconnecting light and cable connected through light post

Design manufacture, supply at site storing , handling, installation, testing and commissioning of 62.5 KVA 50 KW A.C. 3 Phase 415 V, 1500 RPM 0.8 power factor, 50 Hz, Silent Diesel Captive Generation Unit wit ATS panal Radiator for liquid / water cooled DG sets in sound proof enclosure (to meet the requirements of central pollution control board) with inbuilt fuel tank as per specification complete in all respect self - excited, self - regulated, screen protected, drip proof alternator with static excitation system, capable of developing rated output at 415V, 0.8 p.f. 50 Hz when running at 1500 RPM at NTP conditions and conforms to the IS 4722 standards alternator coupled to diesel engine complete with all accessories such as tool kits service manual, self starting de\rice instrument panel, Floor mounting sta ndard control panel(GCP) contains 1No. Genset Controller havi• 9 Alternator parameters like Voltage, Frequency, Amps, KW, KVAR, PF etc, 3 Nos. Current Transformers, 1 No. KWH meter - 3phase, 4 wire unbalanced, 1 set Aluminium busbars of suitable capacity, 2 Nos. Indicating lamps - ‘ set running’ and “set on load", 1 No. 4 POLE MCCB with shut trip Coil, 3 Nos. Instrument Fuses, 2 Nos. Earthing studs,1No. Earth Fault Relay. and terminal box as per specification, adapter box, glands, nuts, earth terminals for engine & alternator in diametrically opposite position, light inside acoustic enclosure etc. first filling of engine oil, Gear oil, high speed diese oil, coolant, 12 volts Battery Charger, 1No 12V chargeable battery set (Minimum 180 AH capacity) etc complete.

Supplying and laying 25 mm X 5 mm G.I strip on surface or in recess and 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt. spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I nut bolt & spring washer spaced at 50mm)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories. and providing masonry enclosure with cover plate having locking arrangement and wateñng pipe of 2.7 meter long etc. with charcoals coke and salt as required.

Providing foundation for DG of suitable size ( Baisement 300mm above GL) in Cement Concrete 1:2:4 using 20mm broken stone and base course of foundation CC1:4:8 including earth work excavation, cost of materials and labour charge etc complete.

Fabricating shed of suitable size and hight, using 50 mm dia GI pipe(medium ctass) for pillers (4Nos) and steel truss work with round, square or rectangular hollow tubes and smooth finishing 2 coat painting with synthetic enamel paint of approved brand after priming coat of approved steel primer. Roofing with GI hard colour powder coated traWord sheets 0.35mm thick with all acessories. Including all meterial chare and labour charge etc complete.

All the Statutory payment remitted by the contractor, for obtaining energisation approval from the concerned authorities will be reimbersed in actual on producing the bill from concerned Electrical Department.