Loading
Loading…
Loading…
Tender Value
₹54.4 L
EMD Value
₹1.1 L
Closing Date
30 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MAINTAINCE
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The firm/contractor should submit a valid "B" grade or above electrical Contractor license issued by the Government Electrical Licensing Board in favor of the Firm/contractor (OR) the site Supervisor should possess the necessary valid "B" grade or above electrical Contractor license issued by Government Electrical Licensing. A copy of the valid license shall be submitted with the offer. The offer without a copy of a valid "B" grade or above Electrical Contractors license shall be summarily rejected.
Similar Nature of Work: "Works of wiring / cabling or installation and Commissioning of electrical Items (Other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items / equipment's) For 230V, 1 Phase or 415V, 3 Phase System or higher voltages."
47 conditions · 7 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. and corresponding documents shall be submitted by the tenderer as per the composition of the Firm.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond the bid validity period. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Eligibility criteria :- Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affadivit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module, uploading of physically signed Annexure V by tenderer has been discontinued.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Guntakal Division: 1. DHONE: Electrical Arrangements for Proposed Construction of 24 Bedded Capacity TTEs Rest House along with facilities for Kitchen, Dining and Recreation etc., 2. Mantralayam road: Construction of new office building for RPF out post Mantralayam including furniture & toilets etc. - Electrical Arrangements.
GTL-EM-79-2025-26
GTL-EM-79-2025-26
Open
Works - General
6 Months
Anantapur, Andhra Pradesh
₹0
₹1.1 L
30 Mar 2026
5 Mar 2026
16 Mar 2026
317 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 44,53,398.12 | ||
| — | Item Breakup for | details. | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2 mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter. | — | — | — | 43,776 | |
| — | Item Breakup for | details. | — | ||
| Supply and running of 32 mm dia, Ivory coloured PVC conduit of wall thickness not less than 2 mm with junction boxes, bends and all accessories etc as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter. | — | — | — | 5,927 | |
| — | Item Breakup for | details. | — | ||
| Cutting of groove in the wall, plastering of surface to the original for concealing of the conduit in the wall (Laying and fixing of conduit will be paid separately). | — | — | — | 21,000 | |
| — | Item Breakup for | details. | — | ||
| Provision of concealed wiring with two runs of 1.5 Sq.mm 1100 Volts and one run of flexible copper conductor 1.5 Sq.mm 1100 Volts FRLS PVC insulated wires ISI marked (Phase, neutral and earth)( up to 10 meters length)(Rate arrived, considering an average of 7 meters per point) in the PVC conduit pipe with 6A flush modular type switch including 2 way switches where ever required, ceiling rose, bulb holder and modular type plate cover to MS switch control box including all labour charges complete for light points, ceiling fans and exhaust fans points cat walk points and ioh service buidling points etc. accessories. | — | — | — | 60,489 | |
| — | Item Breakup for | details. | — | ||
| Supply and run of 2 nos, 2.5 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 1.5 sq.mm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS 694 (2010) or its latest amendments. | — | — | — | 81,600 | |
| — | Item Breakup for | details. | — | ||
| Supply and run of 2 nos, 4.0 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sq.mm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS 694 (2010) with latest amendments. | — | — | — | 77,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and run of 2 nos, 6.0 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit/Casing and capping pipe conforming to IS 694 (2010) with latest amendments. | — | — | — | 54,285 | |
| — | Item Breakup for | details. | — | ||
| Supply, running, Connecting of 1 core 4Sqmm FRLS, PVC insulated Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendements. | — | — | — | 7,600 | |
| — | Item Breakup for | details. | — | ||
| Supply, running, Connecting of 1 core 6Sqmm FRLS, PVC insulated Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendements. | — | — | — | 12,400 | |
| — | Item Breakup for | details. | — | ||
| Supply, running, Connecting of 1 core 10 Sqmm FRLS PVC heavy duty insulated mutlti stranded Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendements. | — | — | — | 39,600 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular control switch on existing control board with wiring. | — | — | — | 8,783.12 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control including all accessories. | — | — | — | 4,335.75 | |
| — | Item Breakup for | details. | — | ||
| supply and fixing of 16A combined unit with concealed metal box with 4M cover Plate + 16A c curve MCB + 16A Socket + 16A Magnus plug top equiivalent to model no: AA 4 068 of GM make(glossy white) for AC points. | — | — | — | 13,486 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of Angle Holder similar to model no. of AHLHXAW000 of Havells make or equivalent make with necessary screws and all accessores complete. | — | — | — | 1,410 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of Jumbo plate for Holder similar to model no. of ASSPGW002 of Havells or equivalent make with necessary screws and all accessores complete. | — | — | — | 470 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of metal flush box-4 module of model no:JIM 04 003 of GM FOURFIVE make or its equivalent with 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 2,230 | |
| — | Item Breakup for | details. | — | ||
| Supply and Fixing of metal flush box-8 module of model no:JIM 08 005/6 of GM FOURFIVE make or its equivalent with 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 7,200 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of metal flush box-12 module of model no:JIM 12 008 of GM FOURFIVE make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 8,340 | |
| — | Item Breakup for | details. | — | ||
| Groove Cutting for Modular SwitchBoards (Each=1Module) | — | — | — | 4,328.6 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of of Modular Dummy Plate for modular switch boards | — | — | — | 697.2 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of USB charger with indicator (led) & 2 USB ports , output 5V, 2.6A in above mobile charging gang boxes(model no: AD 1 150 of GM make or equivalent make. | — | — | — | 22,480 | |
| — | Item Breakup for | details. | — | ||
| Provision of mobile Charging Arrangements with following accessories (i)3 x 6 Amps one way modular switch (as per IS 3854:1997 with its latest amendments) (ii) 3 x International Socket 13/6 Amps (iii)1 x 16A SP MCB (iv) 12 module or suitable Plastic Enclosures with Cover plate for Surface Mounting, (v) Supply and fixing of 02 No's of dummy plates in the 12 modular plastic encloseure including Fixing of Charging point on the Wall/Pillers/Structure with suitable clamps/ rag bolts etc complete including all other connected materieals and accessories. | — | — | — | 21,620 | |
| — | Item Breakup for | details. | — | ||
| Supply and installation of high quality statinless steel mobile charging stand to provide at staions made stainless steel (2 mm thick)material with dimension 24cm*22cm* 4cm which is light weigt and tough at the same time look bright and elegant with mirror polish with three screw holes to easily fix on wall /pillar structure with suitable clamps/rag bolts etc complete. | — | — | — | 8,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 10A SP 1 Modular mini MCB conforming to IS:13947, C"Curve Model No.AB 1 111 of GM make or it's equivalent in Module box including all accessories complete. | — | — | — | 5,252.25 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of Recess / Surface mounting 18 W LED Square panel lighter (22.5*22.5*2.0CM) as per attached railway specification with all connected acessories. | — | — | — | 1,94,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties for extension wires etc for fixing) as per attached railway specification | — | — | — | 23,406 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 40W 4 feet LED tube light, with all connected accessories complete for fixing (The supply includes accessories such as clamps, ties for extension wires etc for fixing) as per attached railway specification. | — | — | — | 28,639 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, connecting and comissioning of Bedside Flexible Gooseneck Arm Reading Light,,3watt conforming to IS:16101 of model no.48042 of Philps make or it's equivalentwith all necessary accessories complete. Make:Havells, Bajaj, Syska, Halonix,Philips. | — | — | — | 24,456 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing and commissioning of Foot lamp 4 watt LED 4modular with 4 modular concealed box with enclosure for night light with necessary accessories complete or equivalent make. | — | — | — | 9,192 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 9W LED bulbs as per attached railway specification. | — | — | — | 3,149 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of energy efficient BLDC star electric ceiling fan of 1200mm sweep as per attached railway specification and including necessary plastering, Massinory work and clamps nuts bolts etc... | — | — | — | 1,69,693.5 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 300m Heavy Duty Exhaust fans as per IS:2312:1967 or latest including necessary plastering, Massinory work and clamps nuts bolts etc. | — | — | — | 42,150 | |
| — | Item Breakup for | details. | — | ||
| Supply, Transportation and fixing of storage / Pressure type Vertical / Horizontal 230/250V Single phase 2000 watts ISI mark 5 Star rated water heater with SS/Glass lined tank and ABS plastic body of 15 Ltrs capacity to withstand up to 6.5 bar of water pressure conforming to IS:2082/93 including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and all labour charges etc., complete. Makes: Crompton model No. solarium plus SWH 725, Class 1 rated or its equivalent make of Make Bajaj,AO Smith,Venus,V-Guard. | — | — | — | 45,300 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of junction box suitable for street light poles model no.GSJB306-T of size 275mm X135mm X 110mm with 4 nos of connectors and suitable clamps for fixing , Fire retardant - Class F V-0 as per IS:11731 Part-II or V-0 as per UL-94. (fixing should be required as per instruction of site supervisor). Suitable clamps for fixing (MS Clamps 02 Sets for each Box with necessary bolts and nuts as per site condition for GI channels/poles as per the directions of Site engineer. | — | — | — | 4,250 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of ON Delay/Interval timer in above junction box of Supply Voltage - 20-240VAC, 50/60Hz Model - 800XU of Selec make. | — | — | — | 2,890 | |
| — | Item Breakup for | details. | — | ||
| supply and fixing of 3 Pole AC Power Contactor 25 Amp 1 NO 1NC AC 3 PH 415 V Coil Voltage 110 V AC Aux. | — | — | — | 4,855 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing and connecting of 2pole 2 module 16A/25A Lexic RCBOs conforming to IS 12640-2(2008) with its latest amendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 16,989 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection Of Occuswitch Surface Mounted Movement Detector Similar To Model No.Lrm1061/00 Of Make Philips. Makes: Philips, Crabtree, Havells. | — | — | — | 15,840 | |
| — | Item Breakup for | details. | — | ||
| Supply, laying and connecting of 25x3mm GI Flat with 40GSM Zink coated, conforming to IS:280-2006 or latest, it is to be laid & connected from equipment to earth electrode for continuity. | — | — | — | 2,376 | |
| — | Item Breakup for | details. | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with armourd cable for earth continuity. | — | — | — | 19,500 | |
| — | Item Breakup for | details. | — | ||
| Excavation of earth for one pit in any soil and refilling as per Drg.NO. RE/33/P702/ MOD.F | — | — | — | 3,951.96 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of "B' class GI pipe dia 50mm, 3.1 mtrs length with 3.65 mm thickness including GI socket and nuts (3.1 mtrs ) including drilling of 12mm holes as per the RDSO Drg No. ETI/OHE/P/ 7021 (MOD.A) or if any latest. Earth electrodes shall be procured from CORE approved sources only, List of CORE approved sources is enclosed as Anneux-CORE List). | — | — | — | 20,251.92 | |
| — | Item Breakup for | details. | — | ||
| Drilling of 26 Nos of 12 mm dia holes on GIpipe dia 50 mm | — | — | — | 1,938 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of Charcoal. | — | — | — | 6,037.2 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of Salt. | — | — | — | 4,174.8 | |
| — | Item Breakup for | details. | — | ||
| Provision of RCC earth pit hollow box of size 300 mm x 300 mm x300mm with 50 mm wall thickness as per Drg. no. SDO/RDSO/E&B/001 by using M20 Grade pre-cast RCC. Supply and Erection of RCC pre-cast slabs with hook to cover Earth pits of dimensions as shown in IRSEM drg no 19-D6. All the required materials for this work i.e. stones, cement, iron and sand etc. are to be supplied by contractor.). Inspection by Consignee. | — | — | — | 10,438.32 | |
| — | Item Breakup for | details. | — | ||
| Transportation charges including loading & unloading of earthing arrangements system material to site / location | — | — | — | 2,982.6 | |
| — | Item Breakup for | details. | — | ||
| Supply, Erection, Testing and Comissioning of Maintenance free earthing with all necessary accessories complete according to IS 3043-1987 and as per RDSO spec No: rdso/spec/ps/0109(rev.0)-2008 Amendment'1'. | — | — | — | 57,252 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench in all types soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 45,126 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench duly breaking the existing cement concrete flooring and filling with layer of sand bricks etc.,as per the standards of cable laying (A minimum of 1mtr depth and 400 mm width) and filling the trench with soil duly ramming etc.The flooring shall be made good with cement concrete as original by the contractor after completion of trenching work up to the satisfaction of the Engineer at Site.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 1,07,520 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench in hard soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works. | — | — | — | 7,300 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench of size 400mm x 1 mtr deep track X-ing/Road X-ing and making good of the same to its original form and shape completely including all connected materials and works. | — | — | — | 19,146.5 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23. | — | — | — | 2,600 | |
| — | Item Breakup for | details. | — | ||
| Supply of Floor Mounted Hot, Cold and Normal Water Dispenser of storage capacity 15-20 Ltrs, cold strorage 1-3 Ltrs, hot water storage 0.5-3 Ltrs. Normal Water flow rate 100 LPH, 230v single phase (50 HZ) Make: Bluestar/Voltas/Usha | — | — | — | 19,996 | |
| — | Item Breakup for | details. | — | ||
| Supply of DPX3 160+18 of 6 way DB of legrand cat no.5077 46 with metal door with provision for incommer of MCCB upto 160 Amps , bus bar of capacity 250A and outging for 18 Module with busbar din and neutral link with all necessary accessories complete or equivalent make. | — | — | — | 14,416 | |
| — | Item Breakup for | details. | — | ||
| Supply and installation of 160 A 4P MCCB, 36 KA, Micro processor based adjustable with LSIG protection conform to IEC 60947-2 model no. 4205 37 of Legrand make or it's equivalent make with extended ROM , spreader links (2 sets). | — | — | — | 1,97,910 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 32A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 14,220 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 63A TP MCB conforming to IS:8828 with its latest, of model no.408661 of legrand make or it's equivalent . | — | — | — | 9,290 | |
| — | Item Breakup for | details. | — | ||
| Supply fixing connecting and comissioning of 18 way SPN Distribution board 12 module of model no. 5076 04 with metal door of legrand make or equivalent make comprising of the following switchgear of make with all connecting accessories complete. | — | — | — | 13,916 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of SPN DB's, 8 way 8 module confirming to IEC:61439 IP 43 with metal door model no.507611 of legrand make or its equivalent make | — | — | — | 10,780 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of SPN DB 4 way 4 module of model no:5076 11 of legrand make or its equivalent make with all connected acessories | — | — | — | 10,374 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing and connecting of 2pole 2 module 32A Lexic RCBOs conforming to IS 12640-2(2008) with its latest amendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 17,489.5 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 40/50/63 A A 4P MCB C Curve, 10 KA capacity with necessary connections and all accessores complete. | — | — | — | 27,740 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of B curve DP MCBs of 32 A with all connected accessories as per IEC 60898-1 or its latest. | — | — | — | 14,200 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 10/16/20/32A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 with its latest amendments, with all connected accessories. | — | — | — | 10,350 | |
| — | Item Breakup for | details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 1204 of Hensel make or equivalent make with necessary terminals suitable for cables upto 150Sq mm and all necessary accessories complete. | — | — | — | 96,480 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of LTUG 4 core 25 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necassary lugs and terminations complete. | — | — | — | 51,370 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 50 mm outer dia of PE-100,PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 40,000 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 50 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necassary lugs and terminations complete. | — | — | — | 86,170 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 63 mm of PE-80 grade in PN-4 size as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 27,500 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 95 sq.mm XLPE insulated underground armoured aluminium cable as per IS 7098(Part 1)1988 with latest amendments with necessary lugs and terminations complete. | — | — | — | 1,54,572 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 75 mm of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 54,300 | |
| — | Item Breakup for | details. | — | ||
| Design, manufacture, display and installation of wall /hanging / floor mounting type LED illuminated sign / direction boards in Full Elliptical (FE), Half Elliptical (HE), SemiElliptical (SE), parabolic /Triangular shape. All the specifications are as per Standard Signages at Stations On Indian Railways- April-2023 or its latest amendment. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage. | — | — | — | 1,19,455.5 | |
| — | Item Breakup for | details. | — | ||
| Supply, erection , testing and commissioning of Solar Standalone Street Light system(Model-III) including LED street Light= 36W, within-built Solar chargecontroller,1 No SPV Panel=150Wp, 1 No GEL Battery =75 Ah(2 days Backup), GI Tubular Pole 6M with MPPT(Maximum power point Tracker)(2 Days Backup) with necessary arrangement forfoundation as per specification attached. | — | — | — | 2,04,934.4 | |
| — | Item Breakup for | details. | — | ||
| Couping of exsting rail/tubular pole including required material and labour charges etc. The Couping Should be 600mm height in that, 150 mm below the ground level and 450 mm above the ground level. It includs digging around the Tubular Pole/Rail pole etc to a depth of 150 mm and the diameter of the couping should be 300 mm | — | — | — | 1,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of Pesto Flash insect killer 230V, 50Hz with 02 Nos of Ultra Violet Lamps, Make:PCL,Havells,Phillips | — | — | — | 13,800 | |
| — | Item Breakup for | details. | — | ||
| Supply, Erection and connecting of SMC Junction Box of Size 700 x 480x 210 mm of Model No: GSJB 7450 of Sintex make or equivalent make for fixing of 4-Pole MCCB-63A and termination of 95 Sq.mm cable to extend supply to welding plants. (fixing should be required as per instruction of site supervisor). Suitable clamps for fixing (MS Clamps 02 Sets for each Box with necessary bolts and nuts as per site condition for GI channels/poles as per the directions of Site engineer. | — | — | — | 67,520 | |
| — | Item Breakup for | details. | — | ||
| Supply, Erection and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 2404 of Hensel make or equivalent make with necessary terminals suitable for cables upto 240 Sq mm and all necessary accessories complete. | — | — | — | 42,740 | |
| — | Item Breakup for | details. | — | ||
| Design, Supply, erection, fixing and commissioning of 10KWp roof top on-grid solar plant with MPPT technology with SPV array, Framed Dual Glass Mono PERC Bifacial Solar Module including Mounting structure consisting of Maximum Power Point Tracker (MPPT), Inverter with remote monitoring system (10KW output pure sine wave inverter), Net Meter and Controls and Protections, interconnect cables and switches all complete as per the latest standard specifications | — | — | — | 5,77,989 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, testing, connecting and commissioning of 2.0 Ton capacity Hi wall split inverter Air conditioner 5 star rated with hermitically sealed Copper Condensor and ISEER 5.6-6, R-32 Refrigerant including all accessories & fixing of Outdoor Mounting Stand etc with required lenght of the cables between indoor and outdoor units Note: (1) AC unit supplied to railways must match with the BEE Star Rating valid as on the date of supply. (2)The Product must be registered, on the name of Consignee, with OEM, after successful installation. | — | — | — | 6,15,000 | |
| — | Item Breakup for | details. | — | ||
| "Supply, installation, testing and commissioning of Energy Saver for air conditioning units for 2T Capacity having memory based micro controller, with Dual sensor & display for room and coil temperature, measures room /coil/ ambient temperatures- features A 10-PT programmable menu and a remote to change your set temperature, which constantly analyses the temperature transfer profiles between the air and evaporator coil. (Warranty Period : Upto 30 months from the date of delivery.) ACCEPTED Make: Airtron or equivalent" | — | — | — | 1,18,472 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of wall/floor mounting type Voltage stablizer of V-Guard VG 500 Voltage Stabilizer forAC up to 2 Ton (170 - 270 V) with all connected accessories and works .Makes v-guard,keeline.. | — | — | — | 19,800 | |
| — | Item Breakup for | details. | — | ||
| Supply and provision of set of copper pipes i.e. from Indoor to outdoor and outdoor to indoor unit suitable for 1.5-ton /2 ton inverter AC including foam insulation over and above of 3 mtrs. of set of pipes supplied along with AC by OEM as per site requirement | — | — | — | 24,111 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of Make:Dyson,Dryflow,D-flow,Turboforce. | — | — | — | 5,750 | |
| — | — | — | or | ||
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 16A combined unit with plastic surface box with 3M Cover Plate + 16A MCB + 16A Raised Socket + 16A plug top of model no: AA 3 173 of GM make or equivalent make. | — | — | — | 2,545 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of LED Bollard light 8W conforming to IS:16101 of model no:SSK- 053214-45-8W or its equivalent. | — | — | — | 54,960 | |
| — | Item Breakup for | details. | — | ||
| Supply, Transportaion, Erection & commissioning of 5mtr long hot dip galvanised Octagonal pole (IS 875) with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet (S 355 JO steel plate for shaft), along with base plate IS 2062 of size 200x200x12mm, M16x600 long J type EN8 grade foundation bolts, 1000mm long single/ Double arm bracket Including the Supply of Suitable bolts with Bakelite Sheet with MCB ( for mounting inside the base compartment of pole ) including Erection & commissioning of 5 mtr. octagonal pole including RCC concrete foundation & plinth in hard soil including excavation of soil, tamping of concrete, grounting and supply of other required materials and accessories complete. | — | — | — | 91,868 | |
| — | Item Breakup for | details. | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octogonal pole by means of PVC insulated copper conductor of 3 core 1.5 Sq mm with necessary lugs at the juction box and necessary termination at the luminaire complete. | — | — | — | 1,825 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necassary lugs and terminations complete. | — | — | — | 17,810 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 40 mm of PE 63 grade, PN8 as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 11,875 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing o f LED street light fittings of 48 W with suitable driver with all connected materials (The supply includes accessories such as clamps, ties for extension wires etc for fixing) conforming to IEC 60598-1 as per attached railway specification. | — | — | — | 35,250 | |
| — | Item Breakup for | details. | — | ||
| Supply,Transportation,erection and Commissioning of MNRE approved and confirming to IS 16544 with latest amendments 500 LPD Tube Collector type Solar Water heating System with temperature application of 60 degrees with Stain less steel - 304L grade/ Glass lined inner tank with PUF Insulation, suitable rubber pipe connection from Collector to Solar Tank with electrical Heating back up etc., with 3 years Guarantee for Solar system and additional 2 years warranty. | — | — | — | 87,400 | |
| — | Item Breakup for | details. | — | ||
| "Supply and fixing of 50 mm thick Rockwool insulated hot water 1 inch dia. pipe line CPVC ISI marked with fittings and clamps wire mesh and aluminium cladding with self tapping cocks. Material should be of good quality of reputed make. " | — | — | — | 40,950 | |
| — | Item Breakup for | details. | — | ||
| "Supply and fixing of 1 inch CPVC valve suitable for insulated CPVC pipe 1 inch. " | — | — | — | 776 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, testing & commissioning of 1 1/4" Gate Valve (ISI Marked) (Screwed End) made of Brass with connected materials | — | — | — | 4,800 | |
| — | Item Breakup for | details. | — | ||
| Supply and provision of ½" size ISI marked push cock type stainless steel water Tap in every solar water heating system. | — | — | — | 3,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and installation SINTEX 1000LTR WATER TANK with suitable stand with all connected works. Make : Sintex/Plasto | — | — | — | 10,979 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
EARTHINGCOMBINEDSPEC.pdf
ATTACHMENT
GCC April 22 With Correction Slips
ATTACHMENT
RITESInspectionLr..pdf
ATTACHMENT
Technicalspecifications--9-26.pdf
ATTACHMENT
ListofLikelySuppliers.pdf
ATTACHMENT
GCC_April-2022WithCorrectionSlips..pdf
ATTACHMENT
SCOPEOFWORKFORWiring.pdf
ATTACHMENT
CEGETechnicalCircular_compressed.pdf
ATTACHMENT
SolarSpecifications.pdf
ATTACHMENT
SolarLED-TechnicalSpecification.pdf
ATTACHMENT
Signages_Standard_Sizes-1-42.pdf
ATTACHMENT
Signages_Standard_Sizes-43-75.pdf
ATTACHMENT
MasterTenderdocumentGTL-EM-79-2025-26.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .