SPECIAL REPAIR TO BLDG NO. P-1 (ADM WING A AND B) AT GANDHINAGAR AND SPECIAL REPAIR TO CANDIDATES L/IN ACCN AND MESS AT GANDHINAGAR UNDER GE (AF) CHILODA

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls complete all as specified and directed.

M&L for dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc. complete all as specified and directed.

All as per item No 4 here in before but on vertical surfaces/skirting.

M&L for Glazed ceramic coloured tiles in vertical surfaces 450x350x7mm/ 450x300x7mm/ 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Granite 18 - 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F in repair one piece EWC with UF soft close swat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fitting, of size 360x725x735mm with P trap 300mm complete all as specified and directed. (Make Jaquar Cat No. SLS-WHT-6851S300UF or equivalent as approved by GE.)

S&F in repair angular stop cock with wall flange fixed to15mm bore pipe complete all as specified and directed. (Make- Jaquar Cat No.057PM or equivalent as approved by GE.)

S&F in repair long body CP bib cock with wall flange fixed to15mm bore pipe complete with all fittings complete all as specified and directed. (Make- Jaquar Cat No. COP-107PM or equivalent as approved by GE.)

S&F in repair 15 mm CP Bib cock 2 way with wall flange fixed to15mm bore pipe complete with all fittings complete all as specified and directed. (Make- Jaquar Cat No. COP-041PM or equivalent as approved by GE.)

S&F in repair 15 mm CP pillar cock fixed to15mm bore pipe complete with all fittings complete all as specified and directed. (Make - Jaquar Cat No. KUP-35001PM or equivalent as approved by GE.)

S&F in repair CP Health Faucet with 8mm dia, 1.20 mtr long flexible tube & wall hook complete all as specified and directed. (Make- Jaquar Cat No. ALD-573 or equivalent as approved by GE.)

S&F in repair liquid Soap dispenser with metallic bottle complete all as specified and directed. (Make- Jaquar Cat No. ACN-1137N or equivalent as approved by GE.)

S&F in repair toilet roll holder with stainless steel flap complete all as specified and directed. (Make- Jaquar Cat No. ACN-1153S or equivalent as approved by GE.)

S&F in repair urinal spreader of chromium plated of any colour for fixing with 15 mm dia pipe complete all as specified and directed.

S&F Wall mounted automatic hand dryer machine for washroom fixing with nails/screw etc complete all as specified and directed.

S&F in repairs 32 mm size PVC waste pipe for wash hand basin / urinal / sink of 900mm long complete all as specified and directed.

S&F in repairs vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap & flushing pipe complete all as specified and directed.

S&F in repair EWC with wall hung cistern, Drainage L Bend Pipe, Gasket and installation Kit with PP normal close seat cover, hinges, Fixing acessories and accessors set of size 360x480x395mm with P trap 300mm complete all as specified and directed. (Make Jaquar Cat No. CNS-WHT- 551SNPP184LZ or equivalent as approved by GE.)

S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern with PVC connection 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed.

M&L for Brick work with fly ash brick, old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with fly ash bricks, old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

Demolition cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for 75mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in sub bases,floor finishes and pavings complete all as specified and directed.

M&L cement concrete type B1 1:3:6 (20mm graded aggregate) for plinth protection etc complete all as specified and directed.

M&L ATT Along the external/enternal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Taking down cement or cement lime plaster any description incl racking out joints, hacking for key, scrubbing down with water etc. Note :- Repairs in patch work complete all as specified and directed.

M&L for rendering 10mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all as specified and directed.

M&L for 5 mm thick cement plaster in CM 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM 1:4 in two layer with WPC on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately )

Supply only Liquid water proofing compound complete all as specified and directed.

M&L preparing new surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L preparing new surface of wall and applying two coat of oil emulsion distemper over a coat of primer and 3 mm thick wall care putty complete all as specified and directed.

M&L preparing new surface of wall and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall over applying two or more coats of 100% Premium acrylic emulsion paint (weather) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparing of old surfaces of ceiling and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for preparing of old surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for preparing of old surfaces of wall and applying one coat of acrylic weather coat paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Dismantling Plain or corrugated steel/ Fibre translucent sheet / Polycarbonate sheet, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

S&F Polycarbonate sheet any colour and any shape and sizes including cutting, bending, wastages of materials and including all necessary accesaries to fixed with MS iron etc. complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge

S&F Frosted glass ordinary quality 4mm thick, glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

Dismantling water tanks exc 500 but n.exc 1000 Litres capacity.1000 Litres capacity complete all as specified and directed.

S&F rotational moulded water storage tank 1000 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F in repairs 20 mm ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking up or down steel tubing pipe and connections 15 mm bore complete all as specified and directed.

Taking up or down steel tubing pipe and connections 20 mm bore complete all as specified and directed.

Taking up or down steel tubing pipe and connections 25 mm bore complete all as specified and directed.

S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 20mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 25mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 15 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 25 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 20 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F in repair 25 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F in repair 40 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors/ trenches complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/ trenches complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

S&F in repair 75 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 75 PVC (SWR) reducers complete all as specified and directed.

S&F in repair 110 PVC (SWR) reducers complete all as specified and directed.

S&F in repair 75 PVC (SWR) couplers complete all as specified and directed.

S&F in repair 75 PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 110 PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore dia of outlet of pipe complete all as specified and directed.

S&F in repair PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement 75 mm bore dia of outlet of pipe complete all as specified and directed.

S&F in repair stainless steel grating doom 150x150mm complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) 'P’ trap complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) 'S’ trap complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement and making good of disturbing gound with PCC 1:2:4 complete all as specified and directed.

S&F PVC (SWR) Pipe of 110 mm (4") Dia. Vertical Fixed line: Plumbing Pipe Clamping Support made of Profile Bracket (A2 - 75 mm wall distance)+ Low Carbon Continuous Slotted C Channel (L3) size 10 inch. + U bolt (F2 - 110 mm dia. pipe). Profile Bracket (A2) / Continuous Slotted C Channel (L3) size 10" made of Low Carbon Deep Draw Hot Roll Gauge Corrected Mild Steel with Ribs and Notches and Hot Dip (> 65 micron) + Zn Al Flake coated ensuring Salt Spray Test of above 2000 Hours; with Flange Bolt & Flange Nut having natural serration - Zn Al Flake coated for fixing Profile Bracket and C Channel. The U bolts are made of Low Carbon Mild Steel with Rod diameter > 7 mm; Zn Al Flake coated with Semi Transparent Ribbed Silicon Rub Sleeve; with Flange nuts set having natural serration - Zn AlFlake coated. Refer Technical Drawing - TD 46 R1 for details. Note :- Profile Bracket (A2 - 100 mm Wall Distance) - 2 Nos; 2. Continuous Slotted C Channel - 10" size 1 No.; 3. U Bolt for 110 mm Pipe Dia. - 1 No.; 4. Justi Khilla 2" size Zn coated - 4 nos per set.

S&F PVC (SWR) Pipe of 75 mm (3") Dia. Vertical Fixed line: Plumbing Pipe Clamping Support made of Profile Bracket (A2 - 75 mm wall distance)+ Low Carbon Continuous Slotted C Channel (L3) size 10 inch. + U bolt (F2 - 75 mm dia. pipe). Profile Bracket (A2) / Continuous Slotted C Channel (L3) size 10" made of Low Carbon Deep Draw Hot Roll Gauge Corrected Mild Steel with Ribs and Notches and Hot Dip (> 65 micron) + Zn Al Flake coated ensuring Salt Spray Test of above 2000 Hours; with Flange Bolt & Flange Nut having natural serration - Zn Al Flake coated for fixing Profile Bracket and C Channel. The U bolts are made of Low Carbon Mild Steel with Rod diameter > 7 mm; Zn Al Flake coated with Semi Transparent Ribbed Silicon Rub Sleeve; with Flange nuts set having natural serration - Zn AlFlake coated. Refer Technical Drawing - TD 46 R1 for details. Note :- Profile Bracket (A2 - 100 mm Wall Distance) - 2 Nos; 2. Continuous Slotted C Channel - 10" size 1 No.; 3. U Bolt for 75 mm Pipe Dia. - 1 No.; 4. Justi Khilla 2" size Zn coated - 4 nos per set.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 sqm but n exc 4.00 sqm each complete all as specified and directed.

S&F Pressed steel frames size 125X60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides with decorative face veneer with lipping/frame to match complete all as specified and directed.

M&L PCC 1:3:6 Type C-0 Filling In P.S. Door Frame complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) Chowkhat of size 45 x 85mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer- In- Charge.

S&F Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 to pressed steel door frame complete all as specified and directed.

S&F in 150mm extruded brass handles, fabricated type polished complete all as specified and directed.

S&F in 200mm extruded brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F in 150 mm floor floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in 300mm brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F in repair door closer aluminium (extruded section) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Demolition of existing sunken floor of WC/ Bathrrom of up to 450mm depth, and repair to sunken floor with side wall 15mm thick plastering in CM 1:4 of internal surface with WPC at the rate of 3% by weight of cement and applying cold bituminous primer @ 250 grams/Sqm on plastered surface . Thereafter a layer of APP modified membrane shall be laid by torch application method, a layer of coarse sand of thickness 25 mm shall be provided to protect membrame and maintain to proper slope towads mouth of spout pipe than filling with PCC 1:5:10 type E-2 using 40mm graded stone aggregate there after 50mm PCC 1:2:4 and including 32mm bore GI water pipe light grade spout complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F in repair Round shape thin rim Table top basin with fixing accessories of size 360mm x 360mm x 120mm complete all as specified and directed. (Make : Jaquar Cat part No SLS-WHT-6905 or equivalent as approved by GE.)

S&F in repair pillar tap single lever tall boy without popup waste system with 600mm long braided hoses complete all as specified and directed. (Make : Jaquar Cat part No COP-0058PM or equivalent as approved by GE.)

S&F CP Overhead rain shower - ABS type Square 180x180mm complete with all fittings complete all as specified and directed. (Make- Jaquar Cat No. OHS-35495 or equivalent as approved by GE.)

S&F CP wall mixer 3-in-1 with wall flange complete with all fittings complete all as specified and directed. (Make- Jaquar Cat No. FUS-29281 or equivalent as approved by GE.)

S&F 150mm wide galvanised iron chicken mesh of size 20mm opening, 22 SWG dia of wire fixed with nails at the junction of RCC beam and brick masonary wall complete all as specified and directed.

S&F for 5mm thick sheet glass oridinary quality fixing in aluminium frame with necessary rubber beading in square exc 0.5 sq.m in each pane complete all as specified and directed.

Repair to aluminium door, windows and ventilator incl taking down, refixing in same opening after changing glass pan/aluminium sections as required complete all as specified and directed. (Note : aluminium sections/glass pane shall be measured and paid seperately under respective items)

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed to aluminum framing complete all as specified and directed.

Dismantling water tanks exc 250 but n.exc 500 Litres capacity complete all as specified and directed.

S&F rotational moulded water storage tank 500 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Taking down Shutters of any description exc 1 sq.but N.exc 2 sqm each complete all as specified and directed.

S&F 30mm thick 1st class hardwood moulded framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F in repair stainless steel spring door closer for door shutter including roller and roller plate complete all as specified and directed.

M&L for glazed and skeleton shutters 30 mm thick 1st class hard wood open rebated and prepared to receive glass divided into squares rebated sash bars any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of memebres as specified in SSR Part-I section 8 clause 8.24 (a) supply and fixed to chowkat, complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with MS screw & bolts in repairs complete all as specified and directed.

M&L 30mm thick flush door shutter, solid core construction with block board core and ply wood face panels, commercial type on both faces complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section, length of bolt 200mm complete all as specified and directed.

S&F 150mm size aluminum handles, cast type anodised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm length complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repair Stainless steel sink with drainage board made out of 1 mm thick sheet of overall size 495x420mm with bowl size 410x330 x160mm with plugs washers, CP waste coupling and 40mm dia GI light grade waste pipe upto chamber fixed on and including cantilever angle iron 25x25x6mm (2 Nos) brackets complete including making good the disturbed surface using PCC 1:2:4 type B-I using 20 mm graded stone aggregate complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

Harsh Infrastructure

M/s Matadeen Ramchandra Agarwal