Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹19.7 LAdmitted-Fee/PreQual/Technical/Finance | -17.86% | ₹19.7 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹24.0 L
EMD Value
₹47,976
Closing Date
8 Sept 2026, 3:00 pmClosed
Executive Engineer PWD R and B Kumarghat Division
Executive Engineer PWD R and B Kumarghat Division
Development of road from Kundapara to Kundapara road Via Ashutosh Sarkar House during the financial year 2026 2027 Total length 0 450 Km Under the scheme for Special Assistance to states for Capital Investment SH GSB metaling Carpeting and sea
2026_CEPWD_76642_1
32/EE/KD/2026-27
Open Tender
Civil Works - Roads
Percentage
90 days
Pecharthal
As per DNIt
4 documents required · 4 mandatory
₹1,000
₹47,976
8 Sept 2026
2 Sept 2026
8 Sept 2026
2 Sept 2026
8 Sept 2026
2 Sept 2026
2 Sept 2026 - 8 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Stripping excess soil from the shoulder surface to achieve the approved level & compacting with plate compactor at OMC as per drawing & MoRD Technical
specification clause 1903. | - | sqm | 19.1 | - |
| 2 | Providing and laying flat brick soling layer on prepared sub-grade according to lines, grade and cross-section shown on the drawing filling joints with earth free from clay with a plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80 -100 kN as per MoRD technical specification clause 412. | 0.2 | sqm | 579.1 | ₹115.82 |
| 3 | Providing and laying brick edging laid length wise on sub-grade according to lines, grade and cross-section shown on the drawing filling joints with earth free from clay with a plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80 -100 kN as per MoRD technical specification clause 412. | 304.7 | Mtr | 86.1 | ₹26,234.67 |
| 4 | Granular sub- base with well Grade Material(Table 400.1)using Jhama Brick Aggregate By Mix in place Method Construction of granular sub-base by providing well graded material (Jhama Brick Aggregate ,Grading -1 as per Table 400.1,spreading in uniform layers with tractor with attachments on prepared surface , mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coase aggregate ,watering compacting with smooth wheel roller to achieve the desired density, complete as per MoRD Technical Specification Clause 401. (i)For Grading -1 Material (Jhama brick aggregate). | 1 | Cum | 6,398.7 | ₹6,392.3 |
| 5 | WBM Grading III
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per MoRD Technical Specification Clause 405.
(A) By Manual Means | 0.64 | Sqm | 8,452.2 | ₹5,409.41 |
| 6 | Tack coat using hot straight run bitumen of grade VG-30 on W.B.M.
Providing and applying tack coat using hot straight run bitumen of grade VG-30,including heating the bitumen,spraying the bitumen,cleaning and preparing the existing road surface as per specifications:On W.B.M @ 0.75 Kg/sqm | 1,687.5 | sqm | 55.2 | ₹93,150 |
| 7 | 20 mm thick open graded premix carpet using bituminous penetration grade modified bitumen binder providing laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregate ether using penetration grade bitumen or emulsion to required line grade and level serve as wearing course on a previously prepared base including mixing in a suitable plant laying and rolling with a three wheeled 80-100 kN static roller capacity finished to ether Type A or Type B or Type C or Type D as per MoRD Technical specification clause 508.Case- 1 By manual means.
(i) Bitumen VG-30 | 1,687.5 | sqm | 336.8 | ₹5,68,350 |
| 8 | Seal Coat/ Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510. A. By Manual Means Case - IV : Type D (premix with fine sand) (I)Bitumen (60/70 Grade) VG-30 | 1,687.5 | sqm | 77.1 | ₹1,30,106.25 |
stage.html
html • 0.02 MB
finance_78018.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 10.38 MB
32DNIT_merged.pdf
Tender Documents • 3.12 MB
BOQ_78018.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .