Construction of 33 KV Line from Kirtinagar to Maletha

Electrical Items :

ST Pole SP-33 bottom portion Hot Dip

ST Pole SP-55 bottom portion Hot Dip

ACSR Rabbit Conductor

MS channel 125x65 mm

MS Angle 75×75×6 mm

MS Angle 65×65×6 mm for Bracing

33 KV polmer pin insulator with pin 10 KN

33 KV Polmer Disc Insulator B&S Type

Disc Fitting B&S D/R 70 KN

GI wire 7/16 swg

GI wire 6 swg

GI wire 10 swg for guarding

Stay set 20×1800 mm

Stay wir 7/8 SWGG

M/s Earthing road 20×2500 mmm

33 KV V- Type X-Arm

33 KV XLPE cable 3×300 mm2

11 KV XLPE cable 3×120 Sq.mm

33KV KV cable jointing kit 3×120 mm2 O/D

11 KV KV cable jointing kit 3×120 mm2 O/D

11 KV KV cable jointing kit 3×120 mm2 I/D

Supply and fixing of following clamp with bolt & nut

PP Clamp SP-33

E/w Clamp Sp-33

Stay clamp SP-33

Bracing clamp SP-33 Top

Bracing clamp SP-33 Botom

PP Clamp SP-55

E/w Clamp Sp-55

Stay clamp SP-55

Bracing clamp SP-55 Top

Bracing clamp SP-55 Bottom

PG clamp for dog condutor

Hume pipe 8 inch 2 meter long ( half section pipe)

GI pipe 8 inch 6 meter lone

Safe cartage of following meterial form store center to road side of work with loading unloading and proper stacking at both end approx dist. 20 Km.

ST Pole SP-33

ST pole SP-55

Small line material

H/L cartage of following material from road side of work site Avg. Dist.. 0.3 Km.

ST Pole SP-33

ST pole SP-55

Small line material

Digging of pit for erection of following type of pole in all type of soil and fixing of all accessories of pole and erection of support and grouting of pole in CC ratio 1:4:8 block including cost of ballast, cement and sand, back filling of soil and bouldes in pit and ramming rarnd proper alignment, leveling as per RESSPO construction Manual.

ST Pole SP-33 Single pole

ST Pole SP-33 Double pole

ST Pole SP-33 Four pole

ST Pole SP-55 Single pole

ST Pole SP-55 Double pole

ST Pole SP-55 Four pole

Muffing of poles with CC 1`:3:6 block and 45 cm height from ground level including cost of ballast cement and sand etc.

Erection with digging of pits for stay as per RESPO manual in all type of soil grouting of stay rod with CC 1:4:8 cement and sand, afte grouting back filling of soil and boulders in the pit and ramming, nozzaling and fixing of stay wire ith pole and stay rod as per drawing for 33 KV

Dismantling of 11 KV D/P & line of Dangdhari feeder

Erection of 11 KV D/P & Laying Spreading sagging of 11 KV line complete in all respect.

Laying spreading , stringing and sagging of 33 KV line in 3 Phase (3 phase 4 wire) of the following wire as phase wire with GI earth wire complete including fixing of all accessories in 3 nos. Conductor in parallel with binding and jumpering as per profile and sagging chart

Fabrication of MS Channel angle iron after cuttig in required sizes with driling of holes up to good finish for top channel braching and special type bracket etc. As per RESSPO schedule and local approved drawing.

Erection of earthing of support with MS earth rod of 2.5 meter longr including excavation of pit and digging of MS road to proper depth and connecting the earth eletrode with the help of GI wire as per construction manual.

Route alignment and survey of 33 KV

Making of section pole for 33 KV line complete in all respect

Guarding wire 33 KV

Digging of trench for laying hume pipe 8 inch of size 0.60×0.75 including cost of cement sands and ballast.

Laying of Hume pipe into trench & back filling with sand and ballast including fixing of hume pipe of 2 meter long.

Laying of 33 KV cable in hume pipe

Laying of 11 KV cable in hume pipe

Filling & fixing of 33 KV heat shrinkable cable jointing kit as per RESSPO specn.

Filling & fixing of 11 KV heat shrinkable cable jointing kit as per RESSPO specn.

Fixing of GI pipe complete

Fixing of special type bracket for line etc.

Excavation & digging of all type of soil and bolders (1×1×.09)×35+(2.5×1×.09)×40+(2.5×2.5×.3)×4

CC 1:4:8 top & boottom(1×1×.3)×34+(2.5×1.3) ×40+2.2×2.5×.3)×4

RR stone masonary with 1:6 (1×1×1.0) ×34+ (2.5×1×1.5 )×40+ (2.2×2.5×1.5)×4

Route clearance by cutting of tree branches/ proning, loping and chopping of tres for 33 KV line

Painting of poles with angle and channel and all steel part by one coat of red Oxide primer and two coats of aluminum paint and two strip of fluorescent altemate red and white painf 30 cm wide up to 1.5 mtrs from ground level.

ST pole SP-55

ST pole SP-33

Providing and fixing of danger board, under plate complete by providing clamps of MS flat 50×6 mm and nuts & Bolts, Danger Boards of MS sheet 2 mm

T-off connection complete 33 KV

BIJENDRA KUMAR POKHRIYAL

UTTARANCHAL FORGINGS INDUSTRY