07 /EE/PMD/PHED OF 2024-2025/SL7

Amount

PART A

Supply Delivery at site vertical bore well submersible pumping machinery directly couple with integral vertical hollow shaft submersible motor etc. with the following specification and as per NIT. Make-PHED Approved Make Capacity: Discharge: 282m3/hr. Head: 28mtr.

Supply, Delivery and storage at site vacuum Pumping Machinary with baseplate, Suitable rating Induction Motor, coupling, coupling guard, foundation bolt etc. with the following specification and as per NIT. Make-PHED Approved Make A) Vacuum in mm of Hg : 0 - 100 - 600 . B) Air Flow Rate in m3/hr : 162 - 138 - 11

Supply and delivery of following dismantling joint .:- M.S. dismantling joints with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts. ( a ) 150 mm dia. P.N. 1.6

( b ) 200 mm dia.P.N. 1.6

( c ) 250 mm dia. P.N. 1.6

Supply and delivery of following M.S. Flanges . ( a ) 150 mm dia.

( b ) 250 mm dia.

Supply and delivery at site Pressure Transmitter for Intake & High Lift Pump House as per technical specification of NIT. Make-PHED Approved Make

Supply and delivery at site Pressure Based Level Transmitter for OHRs as per technical specification of NIT. Make-PHED Approved Make

Supply and delivery at site Electro -magnetic Flowmeter for .OHRs as per following sizes & technical specification of NIT. Make-PHED Approved Make ( a ) 150 mm dia.

( b ) 200 mm dia.

( c ) 250 mm dia.

Supply and delivery at site Chlorine Analyzer with Voltage Stabilizer for OHRs as per technical specification of NIT. Make-PHED Approved Make

Supply & Delivery at site of Radar Type Level Transmitter for CWR at WTP as per technical specification of NIT. Make-PHED Approved Make

Supply and delivery of 1.5 Sq.mm x 3 core 1.1KV grade PVC insulated & Sheathed with Bare Annealed Copper conductor as per IS:694-2010 and as per technical specification of NIT. Make-PHED Approved Make

Supply and delivery of C.I. specials ( flanged spigot etc. ) at site.

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. (a ) (i) With out angle iron support ( i ) 100x50x1.25mm (18SWG) ( length 3 mtr. approx )

Making masonary Flow Meter Chamber with 100 mm thick RCC slab (mix 1:1.5:3) cover with reinforcement one or more pcs. Supported on 250 mm width brick wall with 1st class brick wall in cement mortar 6:1 including ,brick soling and P.C.C. floor base ,plastering all wall , top ,etc.all complete as per direction . ( a ) Size of Chamber : 1.4 M ( out side length ) x 1.4 M ( outside wide ) x 1.5 M depth

Instalation ,Testing & Commissioning of all items mentioned as in Sl No (1 to 11 ) including supply of all erection items, if required for installation of Flow meter ,pressure transmitter , level transmitter ,etc.including necessary power connection arrangement i.e. wiring , termination by suitable rated copper sockets, power point making ,cutting ,finishing of pipe ,welding work for mettalic flange fitting , flange joints etc. connection of all electrical equipments with earthing ,all complete as per relevant IE Rules with the entire satisfaction of EIC.

Add GST @ 18%

Add CESS @ 1%

B T PROJECTS PRIVATE LIMITED (BID ID -5635903)

WEST BENGAL ENGINEERING CO. (BID ID -5629457)

M S ENTERPRISE (BID ID -5627987)