REPAIRS TO CHARPOY FOLDING GI PIPE BED HARD WOODEN STEEL CHARPOY IP WITH HARDTOP ETC UNDER BSO OF GE ND VISAKHAPATNAM

Amount

GI CHARPOY WITH PLYTOP 32/25 MM (FD-220) : Dismantling GI charpoy with ply top 32/25 mm dia (FD-220) frame including taking down of old plywood completely for replacing broken/unserviceable parts, reassembling the charpoy frame, threading wherever necessary, completely in all respects by inserting/screwing long/short rails and legs inside the 3 way 32/25 mm elbow, duly tightened with check nuts. FD-220 Note : (i) All new parts for reassembling including plywood top and MS stiffener shall be measured and paid seperately.

S&F GI pipe long rail 1980 mm long, 32 mm dia, ISI marked medium grade quality duly threaded at both ends (22 mm long) complete all as specified and directed. FD-220

Conversion of long rail GI Pipe 32 mm dia to two short rail 900 mm long, cuting and threading on both ends (22 mm long), fabricated from the GI pipe retrived vide item No.1 here-in-above and refixing them in charpoys complete all as specified and directed. FD-220

Convertion of short rail GI pipe 32 mm dia to two legs , 375 mm long, fabricated from the GI pipe retrived vide item No.3 here-in-above, the top end of the leg to be threaded 22mm long and the other end provided with 35 x 35 x 5 mm MS sheet welded from the bottom of GI leg all around and refixing in charpoys complete all as specified and directed.. FD-220

S&F GI pipe long rail 1980 mm long, 25 mm dia, ISI marked, medium grade quality duly threaded at both ends (22 mm long) complete all as specified and directed.. FD-220

Conversion of long rail GI Pipe 25 mm dia to two short rail 900 mm long, cuting and threading on both ends (22 mm long), fabricated from the GI pipe retrived vide item No.1 here-in-above and refixing them in charpoys complete all as specified and directed. FD-220

Convertion of short rail GI pipe 25 mm dia to two legs , 375 mm long, fabricated from the GI pipe retrived vide item No.3 here-in-above, the top end of the leg to be threaded 22mm long and the other end provided with 35 x 35 x 5 mm MS sheet welded from the bottom of GI leg all around and refixing in charpoys complete all as specified and directed.. FD-220

S&F GI three way elbow, 32 mm dia ISI marked, complete all as specified and directed. FD-220

S&F GI three way elbow, 25 mm dia ISI marked, complete all as specified and directed.. FD-220

S&F GI check nut 32 mm dia, hexagonal shaped, complete all as specified and directed FD-220

S&F GI check nut 25 mm dia, hexagonal shaped, complete all as specified and directed FD-220

S&F 12mm thick ply wood top BWR grade confirming to IS:303 for GI Charpoy, complete all as specified and directed and as all as shown in drg. FD-220

S&F of flat iron stiffner of size 25mmx6mm thick and 900mm long at equal distance and perpendicular to long rails of GI Charpoy,fixing by drilling holes including counter sunk screwnuts and washers at both ends on top side of long rail including dismantling of old flat iron complete all as specified and directed.

S&F GI nut and bolt of size of 75mmx6mm,conforming to IS.1239 (Part II) 1982, complete all as specified and directed. FD-220

CHARPOY IP WITH HARD TOP (FD/MAP/II/01) - M & L 12mm thick ply wood top BWR grade confirming to IS:303 as in charpoy hard top, screwed to stiffner of Charpoy IP with hard top including taking out old unserviceable plywood complete all as specified and directed by Engineer-in-Charge. (Drg No FD/MAP/II/01)

M & L 25mmx25mmx1.50mm thick MS square tube, 850mm long, as in stiffner of charpoy IP with hard top, welded to long rail including taking out old unserviceable MS tube complete all as specified and directed (Drg No FD/MAP/II/01)

S & F 70mmx25mmx6mm thick MS plate, welded to frame of charpoy hard top to support ply top applying two coats of synthetic enamel paint over a coat of red oxide including taking out old unserviceable MS plate complete all as specified and directed (Drg No FD/MAP/II/01)

S & F in repairs rubber shoes suitable for 38x38mm MS square tube as leg of bed hard complete all as specified and directed (Drg No FD/MAP-II/01)

M & L preparation of old treated steel surfaces of Charpoy IP with hard top as per drawing and applying two coat of synthetic enamel black paint complete all as specified and directed (FD/MAP/II/01).

BED HARD WITH PLYTOP (FD-246/247) - M&L for removing the old unserviceable/ broken leg from bed hard with plywood top (FD - 246/247) and S&F new leg made out of 1st class teak wood and made to shape all as shown on drg and as directed by Engr-in-Charge (FD-246/247)

M & L for removing unserviceable/broken plywood from both side of head board of Bed plywood top and S & F new 4mm thick one side teak face plywood (Natural teak) to both side of head board including 6mm thick teak wood beading provided alround the head board and all as specified in drg and directed (FD-246/247)

M & L for removing unserviceable/broken plywood from both side of Foot board of Bed plywood top and S & F new 4mm thick one side teak face plywood (Natural teak) to both side of Foot board including 6mm thick teak wood beading provided alround the head board and all as specified in drg and directed (FD-246/247)

M & L for removing unserviceable long rail from Bed plywood top and S & F new long rail made out of 1st class teak wood and made to shape and all as specified in drg and directed (FD-246/247)

M & L for removing unserviceable short rail from Bed plywood top and S & F new short rail made out of 1st class teak wood and made to shape and all as specified in drg and directed (FD-246/247)

M & L for removing unserviceable centre supporitng stiffner from Bed plywood top and S & F new centre supporting stiffner made out of 1st class teak wood and made to shape and all as specified in drg and directed (FD-246/247)

M&L for removing unserviceable / wornout existing plywood from Bed plywood top and S & F new 12mm thick ply wood top BWR grade confirming to IS:303 of size 1950 x 900mm of approved make and fixing by SS screws and all as specified in drg and directed (FD-246/247)

S & F in repairs L shape MS corner angle bracket size 70mm X 35mm x 5mm thick fixed to legs to long rail of Bed plywood and all as specified in drg and directed by Engr -in- Charge. (FD-246/247)

BED HARD WITH PLYTOP (FD/MAP/E6/08(R) - M & L 18mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination of size 630x185mm, screwed to MS strip, arc welded to 18mm size rectangular pipe as in head board of Bed hard with plytop including taking out old unserviceable head board complete all as specified and directed (Drg No FD/MAP/08(R))

M & L 18mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination of size 630x310mm,, screwed to MS strip, arc welded to 18mm size rectangular pipe as in foot board of bed hard including taking out old unserviceable foot board complete all as specified and directed (Drg No FD/MAP/08(R))

M & L 45mmx20mmx5mm size MS flat iron for fixing head/foot board, arc welded to rectangular pipe of bed hard, apply two coats of synthetic enamel paint over a coat of red oxide primer to MS flat after welding including taking out old unserviceable MS strip of any size complete all as specified and directed (Drg No FD/MAP/08(R))

M & L 25mmx25mmx1.25mm thick MS square tube, 850mm long, as in stiffner of bed hard, welded to long rail apply two coats of synthetic enamel paint over a coat of red oxide primer to MS pipe after welding including taking out old unserviceable MS pipe of any size complete all as specified and directed (Drg No FD/MAP/08(R))

M & L 12mm thick ply wood top BWR grade confirming to IS:303 as in bed hard screwed to stiffner including taking out old unserviceable plywood complete all as specified and directed by Engineer-in-Charge (Drg No FD/MAP/08(R))

S & F in repairs rubber shoes suitable for 38x38mm MS square tube as leg of bed hard complete all as specified and directed (Drg No FD/MAP/08(R))

M & L preparation of old treated steel surfaces of Bed Hard MAP as per drawing and applying a coat of synthetic enamel black paint complete all as specified. (Drg No FD/MAP/08(R))

CHARPOY FOLDING (FD-388(R) - M & L 8 mm thick ply wood top BWR grade confirming to IS:303 of size 930x900 mm ,2 Nos each in Charpoy Folding steel with plytop ,screwed to stiffner including taking out old unserviceable plywood complete all as specified and directed (Drg No FD-388(R)

M & L preparation of old treated steel surfaces of Charpoy Folding steel with plytop and applying a coat of synthetic enamel black/brown/olive green paint complete all as specified and as directed (Drg No FD-388(R)

M & L preparation of old treated steel surfaces of Rack Shoe steel MAP as per drawing and applying a coat of synthetic enamel black paint complete all as specified. (FD/E6/MAP/02(R)

Preperation and Painting to whole GI Pipe surface of charpoys with one coat of synthetic enamel paint of silver colour complete all as specified and directed.

Chitturi Associates

VINAYAK BUILDTECHS

Yash enterprises

SOHAN ENGINEERING ASSOCIATES

M/s.Kissenlal Daga