Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.4 LAccepted-AOC 134 BLOCK NO 2 HINDWAN HISAR HISAR | HISAR | HARYANA | 125001 | ₹7.4 L | 1 | Accepted-AOC AOC |
| 2 | 2₹7.5 L+₹12,948.26 (1.76%)Rejected-Finance | ₹7.5 L+₹12,948.26 (1.76%) | 2 | Rejected-Finance Rejected |
| 3 | 3₹7.7 L+₹35,622.48 (4.83%)Rejected-Finance PLOT NO 11 SAWANPURI JAGADHRI 135003 | YAMUNANAGAR | HARYANA | 135003 | ₹7.7 L+₹35,622.48 (4.83%) | 3 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | M/S The Ad Group Co-operative Labour & Construction Society Ltd L1 | M/S THE BATRA CO OPERATIVE LABOUR & CONSTRUCTIONSOCIETY LIMITED ,AMBALA L3 | THE HARINAM COOPERATIVE LABOUR & CONSTRUCTION SOCIETY L2 |
|---|---|---|---|---|---|---|
| 1.01 | Seated Chest Press (2024) :- Providing, designing and fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary anddressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V r e s i s t a n t environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self-lubricated made by reputed company to be approved by Engineer-in-Charge | 1 | Nos. | 25,200 ₹25,200 | 23,999 ₹23,999 Lowest | 24,000 ₹24,000 |
| 1.02 | CYCLE: This equipment strengthens Lower and Upper Limb muscles. It improves flexibility of joints and helps to lose weight.
Products Sizes and Dimensions: 1050 MM x 560 MM x 1470 MM fabricated with main post of 140mm
dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold
shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colorful and U V resistant environmentally friendly. Bearing used shall be maintenance free, duly oiled sealed and self-lubricated made by reputed company to be approved by Engineer-in-Charge | 1 | Nos. | 26,000 ₹26,000 | 25,518 ₹25,518 | 24,000 ₹24,000 Lowest |
Tender Value
₹8.0 L
EMD Value
₹14,000
Closing Date
23 Jun 2026, 5:00 pmClosed
Vikas Dhiman
Municipal Corporation Yamunanagar
Renovation of Development of Hanuman Park in ward no. 22
2026_HRY_529493_1
20268A952B6C B863 458B A130 CB42F153208A288ULB
Open Tender
Civil Works
Works
100 days
Yamunanagar
2 documents required · 2 mandatory
₹500
₹14,000
Yes
6 Jul 2026
16 Jun 2026
24 Jun 2026
16 Jun 2026
23 Jun 2026
16 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Seated Chest Press (2024) :- Providing, designing and fixing Seated Chest Press of Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary anddressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V r e s i s t a n t environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self-lubricated made by reputed company to be approved by Engineer-in-Charge | - | Nos. | - | - |
| 1.02 | CYCLE: This equipment strengthens Lower and Upper Limb muscles. It improves flexibility of joints and helps to lose weight.
Products Sizes and Dimensions: 1050 MM x 560 MM x 1470 MM fabricated with main post of 140mm
dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold
shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colorful and U V resistant environmentally friendly. Bearing used shall be maintenance free, duly oiled sealed and self-lubricated made by reputed company to be approved by Engineer-in-Charge | - | Nos. | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.99 MB
BOQ_608522.xls
BOQ • 0.28 MB
Corrigendum.pdf
PDF • 0.60 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .