REPAIR / MAINT OF INTERNAL ELECTRIFICATION, SUBMAIN WIRING FITTING/ FIXTURES OF OTM ACCN UNDER GE (AF) JAMANAGR NO 1

Amount

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. including making good the disturbed surfaces complete all as specified as directed by Engineer in Charge.

M&L Concealed point wiring for one light point or one fan point controlled by one switch with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in including PVC conduit. ( Note - Cost for Cutting chases for taking down old point wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 is deemed to be included in quoted rates) complete all as specified as directed by Engineer in Charge.

M&L Concealed point wiring for one 3 pin socket outlet, 5 Amps, independent, with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC conduit. ( Note - Cost for Cutting chases for taking down old point wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 is deemed to be included in quoted rates) complete all as specified as directed by Engineer in Charge.

M&L Concealed point wiring for one 3 pin socket outlet, 5 Amps on the same board with other switches, with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC conduit. ( Note - Cost for Cutting chases for taking down old point wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 is deemed to be included in quoted rates)

M&L Concealed point wiring for one 3 pin socket outlet, 15 Amps, independent, with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 2.5 sq. mm size in and including PVC conduit. ( Note - Cost for Cutting chases for taking down old point wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 is deemed to be included in quoted rates) complete all as specified as directed by Engineer in Charge.

M&L point wiring for one light point/fan point controlled by one switch with cables ( Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC casing & caping pvc/wooden box, sheet cover and required accessories for fixing switch / sockets/regulators etc complete all as specified as directed by Engineer in Charge.

M&L point wiring for One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables ( Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC casing & caping, pvc/wooden box, sheet cover and required accessories for fixing bell push/switch / sockets/regulators etc complete all as specified as directed by Engineer in Charge.

M&L point wiring for One 5 Amps socket point controlled by switch on the same board with other switches with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC casing & caping pvc/wooden box, sheet cover and required accessories for fixing switch / sockets etc complete all as specified as directed by Engineer in Charge.

M&L point wiring for One 5 Amps socket point on independent board with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 1.5 sq. mm size in and including PVC casing & caping and pvc/wooden box, sheet cover and required accessories for fixing switch / sockets etc complete all as specified as directed by Engineer in Charge.

M&L point wiring for one 15 Amps socket outlet on independent board with cables (Wiring with Copper conductor PVC sheathed FRLS cables) 2.5 sq. mm size in and including PVC casing & caping and pvc/wooden box, sheet cover and required accessories for fixing switch / sockets etc complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Modular switch 1 way 6A, 1 module complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Modular Fan step regulator, 120W - 2 module complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Modular switch 1 way 16A, 1 module complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of modular white cover plate with frame 6 to 8 module complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of modular white cover plate with frame 2 to 4 module complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Modular metal Flush box 1/2 to 4 module complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Modular metal Flush box 6 to 8 module complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Switch piano, flush type single pole, one way 5 Amp including connection complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Socket outlet 3 pin, 5A, flush type complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Modular Bell push 6A 1 module complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Bell push, flush type, 5 amp 240 volts AC complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Buzzer, Ding Dong AC. 230 volts, single pole complete including connection complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of in Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of switch 16 Amps including connection complete all as specified as directed by Engineer in Charge.

Supply & Fixing in repair Socket outlet 3/5 pin, 16A, flush type including connction complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of MCCB DB of 415 Volts, 4 way, with double door sheet metal enclosure for fixing TPN DB-VTPN as per IEC 61439-3 and reversible Door for IP 43 & 54 with 250 Amps rated copper busbar for each phase with 2 neutral busbar, 2 earthbar with provision for MCCB as incomer (without MCCB ) and provn for SP/TP MCBs as outgoing(without MCBs) on flush to the wall including making hole in the wall and fixing the DB including cement work and plastering complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair MCCB DB of 415 Volts, 8 way, with double door sheet metal enclosure for fixing TPN DB-VTPN as per IEC 61439-3 and reversible Door for IP 43 & 54 with 250 Amps rated copper busbar for each phase with 2 neutral busbar, 2 earthbar with provision for MCCB as incomer (without MCCB ) and provn for SP/TP MCBs as outgoing(without MCBs) on flush to the wall including making hole in the wall and fixing the DB including cement work and plastering complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of sheet metal enclosure for fixing MCBs TPN with 200 Amps rated neutral busbar 415 Volts, 4 way, with double door fixed on flush to the wall including making hole in the wall and fixing the DB including cement work and plastering complete all as specified as directed by Engineer in Charge.

Supply & fixing in repair of sheet metal enclosures for fixing MCBs Single pole and neutral 8 way, 240 volts with 200 Amps rated bus bar withe double door fixed on flush to the wall including making the hole in the wall and fixing thee DB including cement work and plastering complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Sheet metal enclosures for fixing MCBs Single pole and neutral 12 way, 240 volts with 200 Amps rated bus bar withe double door fixed on flush to the wall including making the hole in the wall and fixing thee DB including cement work and plastering complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete all as specified as directed by Engineer in Charge with one single pole MCB 20Amp

Supply and fix in repair of Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 63 amp complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of MCB triple pole and neutral , 'C' Curve type capacity 63 Amps,10 KA, & 415 V complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of MCBs single pole and neutral, 'C' Curve type capacity 40 Amps ,10KA & 240 Volts complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of MCB single pole, 'C' curve type capacity 6 to 32 Amps capacity complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of MCCB triple pole and neutral , DPX3 thermal magnetic capacity of 63 Amps,415 V , 4 pole and 16KA Short Circuit Breaking Capacity complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of MCCB triple pole and neutral , DPX3 thermal magnetic capacity of 100 Amps,415 V and 16KA Short Circuit Breaking Capacity complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of MCCB triple pole and neutral , DPX3 thermal magnetic capacity of 125 Amps,415 V and 16KA Short Circuit Breaking Capacity complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of RCBOs double pole 30mA, rating 40A FOR EARTH LEAKAGE, OVERLOAD & SHORT- CIRCUIT PROTECTION with enclosure complete all as specified as directed by Engineer in Charge.

Taking down carefully old sub main wiring including conduit and all accessories along with removing to and making good disturbed surfaces complete all as specified as directed by Engineer in Charge.

Material & Labour for sub main wiring with 2.5 run single core multistranded copper conductor cable, of size 2.5 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke Halogen (FRLS-H) drawn through and including rigid non metallic PVC conduit/casing caping of size not less than 20mm with all necessary fitting and including one run single core multistranded copper conductor cable, of size 2.50 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete all as specified as directed by Engineer in Charge. Note: 2 Runs of main cable, one run earth wire and rigid non metallic PVC conduit/casing caping will be measured as one running meter for payment

Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4.0 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke Halogen (FRLS-H) drawn through and including rigid non metallic PVC conduit with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete. Note: 2 Runs of main cable, one run earth wire and rigid non metallic PVC conduit will be measured as one running meter for payment

Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 6.0 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke Halogen (FRLS-H) drawn through and including rigid non metallic PVC conduit with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete all as specified as directed by Engineer in Charge. Note: 2 Runs of main cable, one run earth wire and rigid non metallic PVC conduit will be measured as one running meter for payment

Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 10.0 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke Halogen (FRLS-H) drawn through and including rigid non metallic PVC conduit /casing caping of size not less than 25mm with all necessary fitting and including one run single core multistranded copper conductor cable, of size 10.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete all as specified as directed by Engineer in Charge. Note: 2 Runs of main cable, one run earth wire and rigid non metallic PVC conduit/casing caping will be measured as one running meter for payment

Material & Labour for sub main wiring with 4 run single core multistranded copper conductor cable, of size 4.0 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke Halogen (FRLS-H) drawn through and including rigid non metallic PVC conduitcasing caping of size not less than 32mm with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete all as specified as directed by Engineer in Charge. Note: 4 Runs of main cable, one run earth wire and rigid non metallic PVC conduit/casing caping will be measured as one running meter for payment

Material & Labour for sub main wiring with 4 run single core multistranded copper conductor cable, of size 6.0 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke Halogen (FRLS-H) drawn through and including rigid non metallic PVC conduitcasing caping of size not less than 32mm with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete all as specified as directed by Engineer in Charge. Note: 4 Runs of main cable, one run earth wire and rigid non metallic PVC conduit/casing caping will be measured as one running meter for payment

Material & Labour for sub main wiring with 4 run single core multistranded copper conductor cable, of size 10.0 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke Halogen (FRLS-H) drawn through and including rigid non metallic PVC conduitcasing caping of size not less than 40mm with all necessary fitting and including one run single core multistranded copper conductor cable, of size 10.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete all as specified as directed by Engineer in Charge. Note: 4 Runs of main cable, one run earth wire and rigid non metallic PVC conduit/casing caping will be measured as one running meter for payment

S&F in repair of LED Street Light fitting 30 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of energy efficient decorative ultra slim LED tube light fitting with built in LED & integral LED driver 22 watt, polycarbonate body extruded channel (approximate length 1200 mm) housing & diffuser with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of Energy efficient recessed mounted 36 watt LED luminaries (lumen efficiency not less than 120 Lumen / watt) suitable for 600 x 600 mm grid ceiling along with flat diffuser along with constant current electronic driver complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of LED flood Light fitting 70 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of LED flood Light fitting 120 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of LED flood Light fitting 200 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, complete all as specified as directed by Engineer in Charge.

S&F in repairs LED of 8 watt recess mounted adjustable led downlights made of extruded aluminium housing and high power led as a light source with clear diffuser and separate electronic driver fixed in position & connecting complete all as specified as directed by Engineer in Charge.Note:- Ceiling cutout: Ø 75 mm, height 55 mm for 8 W

Supply and fixing in repair of LED of 10 watt a minimalistic & versatile lighting source that offers a wide range of application with different aperture for same lamp unit. the lamp is deep recessed into the fixture to provide a glare-free solution complete all as specified as directed by Engineer in Charge. Note:- Ceiling cutout Ø 80 mm, height 85 mm attachment 10 W

Supply and fixing in repair of LED Aviation obstruction light fitting die cast aluminium alloy housing, heat resistant, clear thick glass and accessories with LED chip & driver, fixed in position & connecting complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of PVC insulated, 2 core 1.5 Sqmm round sheathed copper conductor(flexible) industrial cable fire retardant complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of PVC insulated, 2 core 2.5 Sqmm round sheathed copper conductor(flexible) industrial cable fire retardant complete all as specified as directed by Engineer in Charge.

Taking down carefully ceiling fan / exhaust fan / pedestal fan / wall mounted fan by disconnecting electric connection for carrying out repairing such as rewinding, replacement of defective spare part, over hauling and painting etc as required and re-fixing in the same position after carry out the repairs works, and connecting complete all as specified as directed by Engineer in Charge. Note:- Repairing such as rewinding, replacement of defective spare part, connecting wire,Over hauling and painting etc will be measured & paid separately under subsequent items.

M & L for rewinding of ceiling fan of any make by dismantling the ceiling fan,removing shaft ,bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing and reassembling and testing of fan complete all as directed by the Engineer-in-Charge.Rewinding should be carried out for the following size of ceiling fan

(a) 1200mm sweep complete all as specified as directed by Engineer in Charge.

(b) 1400 mm sweep complete all as specified as directed by Engineer in Charge.

M & L for rewinding of exhaust fan motor of any make by dismantling the exhaust fan,removing shaft ,bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing ,applying cotton tape and reassembling complete and testing of fan complete all as specified as directed by Engineer in Charge. Rewinding should be carried out for the following size of exhaust fan :-

(a) 450mm sweep complete all as specified as directed by Engineer in Charge.

(b) 300mm sweep complete all as specified as directed by Engineer in Charge.

(c ) 200mm sweep complete all as specified as directed by Engineer in Charge.

M & L for rewinding of flame proof exahust fan motor of any make by dismantling the exhaust fan,removing shaft ,bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing ,applying cotton tape and reassembling complete and testing of fan complete all as specified as directed by Engineer in Charge.Rewinding should be carried out for the following size of exhaust fan :-

(a) 450mm sweep complete all as specified as directed by Engineer in Charge.

(b) 300mm sweep complete all as specified as directed by Engineer in Charge.

M & L for rewinding of Air circulator/Pedestal fan/wall fan motor of any make by dismantling the Pedestal fan,removing shaft ,bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing ,applying cotton tape and reassembling complete all as specified as directed by Engineer in Charge.Testing of fan should be carried out to entire satisfaction of Engr-in-charge. The size of pedestal fan for rewinding shall be as under

(a) 300 mm sweep complete all as specified as directed by Engineer in Charge.

(b) 450 mm sweep complete all as specified as directed by Engineer in Charge.

(c )600 mm sweep complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of ball bearing of any size suitable for ceiling fan 1200 mm / 1400 mm sweep complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of capacitor 2.5 MFD AC 230 Volt 50 HZ, for ceiling fans complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of capacitor 4 MFD AC 230 Volt 50 HZ, of exhaust / bracket fan any size.

Supply and fixing in repair of bolt, nuts, washer and split pin for the down rod of ceiling fan complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of PVC insulated, PVC sheathed three core copper conductor cable multi stranded of size 0.5 Sqmm for connecting of fan from ceiling rose complete all as specified as directed by Engineer in Charge.

Material and labour for painting of ceiling fan including blades by scrapping of old paint ,filling of cavities formed, preparation / cleaning of surface, making surface smooth and spray painting with one coat of white synthetic enameled paint of superior quality and writing MES /SM No with appropriate size letters using black paint complete all as specified as directed by Engineer in Charge.

Material and labour for painting of exhaust fan including blades by scrapping of old paint ,filling of cavities formed,preparation / cleaning of surface, making surface smooth and spray painting with one coat of white synthetic enameled paint of superior quality and writing MES /SM No with appropriate size letters using black paint complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of frame including rubber bush and all accessories suitable for 300mm exhaust fan of any make complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of frame including rubber bush and all accessories suitable for 450mm exhaust fan of any make complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of PVC canopy set(upper & lower) for ceiling fans of any sweep and make and fixing in position complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of blades of ceiling fan of any sweep & make complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of down rod of MS having 15mm dia and length 600mm complete all as specified as directed by Engineer in Charge.

Supply and fixing in repair of blades of exhaust fan 450/300 mm of any make complete all as specified as directed by Engineer in Charge.

suvidhiconstruction (BID ID -3358943)

Pooja Enterprise (BID ID -3360734)

M/s Bombay Novelty Stores (BID ID -3355969)

Nirmal Construction (BID ID -3355617)