Construction of Lawyer's hall Building at Sub divisional Civil Court Campus Sonepur in District Saran

TECHNICAL BID EVALUATION SHEET

BUILDING CONSTRUCTION DEPARTMENT

NAME OF WORK :- Construction of Lawyer's hall Building at Sub divisional Civil Court Campus Sonepur in District Saran

BOQ AMOUNT:- 8020732

SL.NO. PARTICULARS LAID DOWN CRITERIA AS PER NIT CONDITION FULL MARKS EVALUATION CRITERIA BIDDER

A Name and address of agency

B Registration no. & department Agency must be registered with Govt./State Govt./Undertakings Mandatory Agency must be registered otherwise bid will be rejected

C Sale tax/VAT/GST clearance of Govt. of Bihar Must possess sales tax/VAT registration & up to date clearance certificate Mandatory ---do------

D Income Tax clearance Must quote PAN No. Mandatory ---do------

E Earnest Money In the form as specified in N.I.T and required amount. Mandatory ---do------

F Character Certificate Must Posses Character Certificate. Mandatory ---do------

G Electrical Registration In the form as specified in N.I.T and required amount. Mandatory ---do------

Note:-The bidders should necessarily be Responsive on above mentioned Seven counts A to G. The bidders found Non-Responsive in any one of the above mentioned Seven counts will not be considered for further markings & their Bid will be rejected.

MARKING DETAILS

SL.NO. PARTICULARS LAID DOWN CRITERIA AS PER NIT CONDITION EVALUATION CRITERIA

FULL MARKS Desired distribution

1 Average annual financial turn over of last three years (AATO may be indexed as per norms of bidding documents) Submit A.T.O of Chartered account ant for last three years 30 i) AATO equal to or above BOQ amount--30

ii) AATO equal to or above 70%of BOQ amount--20

iii) AATO equal to or above 50% but below 70% of BOQ amount--15

iv) AATO equal to or above 40% but below 50% of BOQ amount--10

v) AATO equal to or above 25% but below 40% of BOQ amount--5

vi) AATO below 25% of BOQ amount--Nil

Average A.T.O.after indexation

2 Experience of doing work of similar nature Must submit details of work done duly certified by the concerned E.E 20 i)If executed single work of similar nature equal to 50% of BOQ amount-20

ii)If executed single work of similar nature equal to 40% of BOQ Amount----15

iii)If executed single work of similar nature equal to 25% of BOQ Amount----10

iv)If executed single work of similar nature below 25% of BOQ Amount----nil

3 Details of Engineering setup for successful completion of work Must submit details Engg. Setup with individual affidavit of engineers. 10 i)Engg.setup with one-Deg.holder+one Diploma holder+suff.. staff--10

ii)Engg.setup with1-Deg.holder/one Diploma holder+suff. staff--5

4 Plant and equipment for successful completion of work i)Automaticbatching plant with all equipment. (ii)Conc.mixer with weighing facility. (iii)Steelshuttering & centering more than 2000sft. (iv)Vibrator & water tanker. 10 i)Atomatic Batching plant with all equipment---10

(ii)Concrete mixer with weighing facility---04

(iii)Steel shuttering and centering more than 2000sft--04

(iv)Vibrator------01

(v)water tanker----01

5 Details of financial availability through bank or self Bank certificate of extending credit facility up to 10% of BOQ amount 10 i)credit facility certificate given by Indian Bank upto 10%of BOQ amount-----05

(ii)Self declaration----05

(iii)No Self declaration----00

6 Necessary undertakings Agency should furnish the following undertakings. (i)Not abandoned project. (ii)No litigation. (iii)No relation. 5 (i)Not abandoned any project--03

(ii)No litigation--01

(iii)No relation---01

(iv)Not submitted any certificate---00

7 Bidding capacity BC=AxNx2-B A=Max.ATO after indexation. B=value of work in hands(Existing commitment) N=Time of completion Attach bidding statements with details 10 i)BC more than or equal to BOQ amount--10

iI)BC more than or equal to 70%but below BOQ amount--5

iI)BC more than or equal to 50%but below 70% of BOQ amount--3

iii)BC below 50% of BOQ amount----nil

8 Timely completion of project Attach certificate of the concern E.E 5 i)If three or more than three projects executed in stipulated time during last five year--05

i)If less than three projects executed in stipulated time during last five year--03

i)If no projects executed in stipulated time during last five year--00

Note:- (i) Minimum qualifying marks = 50/100 for project b/w 40lakhs to 200lakhs

BILL OF QUANTITY

Name of Work:- Construction of Lawyer's hall Building at Sub divisional Civil Court Campus Sonepur in District Saran

S.No. SOR CODE Item of Works Qty Unit Rate Amount

1.0 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All Kinds of soil

1.1 2.8.1 Ali kinds of soil. 361.87 CUM 360.70 130,527

2.0 2.17 Close timbering in case of Septic tank, mannoies and the like including strutting

2.1 2.17.2 Depth exceeding 1.5 m but not exceeding 3 m 29.07 Sqm 140.80 4,093

3.0 2.27 Extra for every additional lift of 1.5 m or part thereof in : 5.92 cum 49.40 292

4.0 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 158.78 CUM 287.30 45,617

5.0 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I. 358.51 SQM 283.30 101,566

6.0 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work upto plinth level. cum 1Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 25.92 CUM 3998.10 103,631

7.0 5.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement.

7.1 5.2.2 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) 1.48 cum 5670.00 8,392

8.0 5.33.1.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-25 grde reinforced cement concrete. 91.22 CUM 5063.40 461,883

9.0 6.1A Brick work with bricks of class designation 100A in foundations and plinth in :

9.1 6.1.12/1 Cement mortar 1 .:4 (1 cement: 4 coarse sand ) 7.39 cum 5017.90 37,082

10.0 6.1.14C Brick work with bricks of class designation FLYASH in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ). 14.21 CUM 4923.00 69,956

11.0 5.33.2.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete... for reinforced cement concrete Walls columns, pillars, posts and struts (M-25) 55.04 CUM 5863.20 322,711

12.0 5.9 Centring and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. 211.98 SQM 211.60 44,854

12.1 5.9.6 Columns, Pillars, Piers, butmentsPosts and Struts 134.81 SQM 494.40 66,648

12.2 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. 133.09 SQM 404.70 53,862

12.3 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for. Suspended floors, roots, landings, balcnies 203.39 SQM 437.50 88,983

13.0 6.1.14C + 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ). Extra for Brick work in superstructure above plinth level upto floor V cum 55.00 CUM 5765.20 317,086

14.0 6.1.12C + 6.3C Half brick masonry with bricks of class designation fly ash in foundations and plinth in : Cement mortar 1:4 (1 cement: 4 coarse sand) Extra for half Brick masonry in superstructure above plinth level upto floor V level. 4.13 CUM 5958.50 24,609

15.0 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement 46.66 SQM 203.60 9,500

16.0 13.18 11) P/V 15mm CP(1:3) with Neat cement punning etc all complete jobs. 59.99 sqm 229.30 13,756

17.0 13.11.4 12 mm Cement plaster in course sand 1:6(1 cement: 6 coarse sand) 502.31 SQM 141.50 71,077

18.0 13.24.2 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) 205.74 SQM 125.60 25,841

19.0 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 347.05 SQM 105.40 36,579

20.0 11.38 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make... complete 17.40 SQM 862.40 15,006

21.0 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622... over 12 mm thick bed of cement Motar 1:3... complete. 55.20 SQM 795.00 43,884

22.0 11.41A.1 Providing and laying vitrifed floor tiles in different sizes... conforming to IS : 15622 157.60 SQM 1022.70 161,172

23.0 10.17 Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar bent to shape... per standard design complete. 15.00 Each 174.60 2,619

24.0 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 0.00

24.1 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia 4434.83 KG 94.50 419,092

24.2 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia 70.55 KG 92.60 6,533

24.3 5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia 2632.68 KG 90.80 239,047

24.4 5.22.7D Thermo-Mechanically Treated bars TMTC-500-16mm dia 5265.36 KG 91.70 482,834

24.5 5.22.7E Thermo-Mechanically Treated bars TMTC-500-20mm dia 5265.36 KG 91.70 482,834

25.0 10.15.2.1 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm profile C 42.59 mtr 432.60 18,424

26.0 9.120.1 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 3.15 sqm 2293.40 7,224

27.0 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board 20.75 SQM 2845.60 59,046

28.0 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including 442.92 KG 144.50 64,002

29.0 10.12.1 Providing and fixing Steel Glazed door, Windows and Ventilation. 29.66 SQM 3038.90 90,119

30.0 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00

31.0 12.79 Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised-PVC rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. 0.00

31.2 12.79.3.2 Single Tee withdoor, 110x110x110mm 4.00 each 193.40 774

31.3 12.79.6.2 Shoe plain, 110mm shoe 4.00 each 115.95 464

31.4 12.79.2.2 Single pushfit Coupler:110mm 6.00 Each 374.60 2,248

32.0 12.8 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc completen.

33.0 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 4.00 cum 47.90 192

34.0 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

35.0 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work

36.0 18.13 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :

36.1 18.13.1 G.I. Distribution 5.00 Each 446.70 2,234

37.0 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

37.1 18.17.1 Gate Valve-25 mm dia. 2.00 Each 532.30 1,065

38.0 18.42 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested :

38.1 18.42.1 Up to 6 metres depth 6.00 m 350.60 2,104

38.2 18.42.2 Beyond 6 m and up to 12 m depth 6.00 m 416.10 2,497

38.3 18.42.3 Beyond 12 m and up to 18 m depth 56.58 m 484.10 27,390

39.0 18.47 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation,refilling the earth or cutting of wall and making good the same complete wherever required :

40.0 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000.00 Ltr 9.70 9,700

41.0 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 10.00 Each 434.20 4,342

42.0 18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 3.00 Each 594.80 1,784

43.0 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore 10.00 Each 500.40 5,004

44.0 17.32.1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia 4.00 Each 946.60 3,786

45.0 17.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required :

45.1 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 2.00 Each 4470.90 8,942

46.0 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

46.1 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous 1.00 Each 5504.30 5,504

47.0 17.23 One urinal basin with 5 litre white P.V.C. flushing cistern each 2.00 Each 1024.90 2,050

48.0 17.7. Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

48.1 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 3.00 Each 2764.40 8,293

49.0 18.37.1 Constructing masonry Chamber 60x45x50 cm inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter 5.00 Each 6849.00 34,245

50.0 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm 2.00 Each 33603.40 67,207

51.0 S/F/F Aluminium/door fittings etc. all comp. job

52.0 21.16.2 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer in-charge 12.00 Each 86.60 1,039

53.0 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper 7.00 Each 60.80 426

54.0 9.95.6 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :75x63x4 mm 28.00 Each 68.00 1,904

55.0 9.72.2 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete: 125x70x4 mm (ordinary type) 12.00 Each 146.00 1,752

56.0 9.74.1 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 250x10mm 12.00 Each 369.40 4,433

57.0 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 7.00 Each 144.50 1,012

58.0 9.62.2 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm 4.00 Each 154.40 618

52.0 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of E/W 51.78 M 1087.90 56,331

53.0 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-iron 40x40x6 mm with 40 mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles including applying a priming coat of approved steel primer. 7.83 SQM 6303.40 49,346

54.0 13.77A.2 Applying one coat of cement primer of approved brand and manufacture on wall surface: Finishing walls with Acrylic Smooth exterior paint of required shade: 409.14 SQM 56.60 23,157

55.0 13.77.2 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade . New work (two or more coats) over and including priming coat with cement primer 298.91 SQM 102.30 30,578

56.0 13.82.1/1 3.82.2 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steelworks 100.80 SQM 83.50 8,417

57.0 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 1.88 SQM 4242.30 7,954

58.0 12.39 Making Khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 over P.V.C. sheet. 10.00 Nos 183.40 1,834

59.0 24.2 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.

60.0 24.3 Supplying assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well casing (CM) pipe of required 150mm dia etc all complete job as per building specification & direction of E/I.

60.1 24.3.1 i) 100 mm nominal size dia 53.94 m 546.10 29,457

60.2 24.3.2 150 mm nominal size dia 13.00 m 660.10 8,581

61.0 24.4 Supplying assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipe of required 150mm dia etc all complete job as per building specification & direction of E/I.

61.1 24.4.4 i) 50 mm nominal size dia 15.24 m 236.70 3,607

62.0 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 5.00 cum 1188.90 5,945

63.0 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 3.00 cum 1195.60 3,587

64.0 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 2.00 cum 1195.60 2,391

65.0 24.8 Gravel packing in tubewell construction in accordance with IS:4097 including providing gravel line/medium/coarse in required grading and sizes etc all complete job as per building specification & direction of E/I. 3.25 cum 1343.20 4,365

66.0 24.9 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. 1.00 each 1213.20 1,213

67.0 24.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe 150mm dia etec. All complete job as per building specification & direction of E/I.

68.0 24.14 Providing and fixing mild steel clamp of required dia to the top of casinghousing pipe of tubewell 100mm dia etec. All complete job as per building specification & direction of E/I.

69.0 24.15 Providing and fixing bail plug/bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part-1) 150mm dia etec. All complete job as per building specification & direction of E/I.

69.1 24.15.1 Bail/bottom plug. 1.00 nos 228.30 228

70.0 18.9 Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes havaing thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings etc all complete jobs.

71.0 24.12 Development of Submersible in accordance with IS:2800 (Part_1) and IS:1189 to establism maximum rate of usable water yield without sand content with required capacity air compressor running the compressor for required time as per direction of E/I etc all complete jobs. 6.00 Hrs 916.80 5,501

72.0 18.36 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box etc all complete jobs. 1.00 nos 7401.00 7,401

73.0 N.S S/F/F 1HP submersible motor ISI mark etc all complete jobs. 1.00 nos 20650.00 20,650

74.0 NS/ Rate approved by SE South Bihar Circle Supplying testing installing and commisioning of ISI marked 4.5kg capacity carbon dioxide type including valve hose reel with provision of wall bracket fixed with anchor fasteners all complete job 4.00 Each 8500.00 34,000

75.0 NS/ Rate approved by SE South Bihar Circle Providing and fixing abc powder type fire extinguishers as per is 15683 consisting of welded ms cylindrical body automatic modular abc powder type extinguisher actuated through a sprinkler head mounted on the extinguisher body complete with internal charge Make:- Newage/ Ceasefire/Kalpex or 4.00 Each 8501.00 34,004

76.0 SL01 P/V labour for cleaning the site & uprooting trees etc all complete jobs. 3.00 Nos 355.42 1,066

77.0 R/A Supplying, providing and fixing MS frame top with 25mm Thk. WPC board etc….......Complete Job. 10.00 Each 11000.00 110,000

78.0 N/S Dining Chair Seat/Back: Stackable Café Chair: Size: (L)381mm X (D)419mm X (H)839mm Seat and back in PVC Moulded Chair with SS 202 grade frame Round Pipe. The Product Should be Certified Company BIFMA,ISO-50001, Green Guard /Green PRO, Sedex, AIOTA, IGBC, AGSI, FSC & PEFC.. The Product Should be Certified Company BIFMA, ISO-50001, Green Guard, Griha, Green PRO, Sedex, AIOTA, IGBC, 42.00 Each 1800.00 75,600

79.0 Carriage of Materials

(I) Bricks (Lead - 1 km kutcha + 7 km pucca) 49834.00 %0 Nos 856.30 42,673

(ii) Coarse Sand (Lead-50.00 Km) from koilwar 113.80 cum 1540.00 175,247

(iii) Stone Chips (Lead - ……... Km) from Revilganj Rack 163.02 cum 3537.00 576,593

(iv) Local sand (1 km kutcha + 2 km pucca) 164.10 cum 285.40 46,834

80.0 Difference in cost of Materials

(i) Cement 1305.00 Bags 8.40 10,962

(A) Total for Schedule & Non Schedule Item Work: 5,786,145.00

(B) Total for Non Schedule Item Work: 130,250.00

(C ) Total for ScheduleItem Work: 5,655,895.00

(D) Apply Correction factor 0.982 on (C ) 5,554,089.00

(E) Add @ 5.36% for balance G.S.T (D) 297,699.00

(F) Total Cost (B+D+E) 5,982,038.00

81.0 Electrification work

82.0 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.

Batten Holder Point 16

Down Light Point 16

Tube Light Point 10

Ceiling Fan Point 10

suspended light point 0

Exhaust Fan Point 4

83 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 135 309.00 Meter 41,715.00

84 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 13 414.00 Each 5,382.00

85 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 9 531.00 Each 4,779.00

86 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. 5 683.00 Each 3,415.00

87 1.57 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 4 nos. 5 pin 5/6 amps modular socket outlet and 4 nos. 5/6 amps modular switch, connection etc. as required. 14 1,064.00 Each 14,896.00

88 1.7 Wiring for circuit/submain wiring along with earth wire with the following size of FRLS PVC insulated copper conducter SC cable in surface / recessed medium class PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (for Circuit) 175 201.00 Meter 35,175.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 210 246.00 Meter 51,660.00

1.7.3 2 X 4 sq mm + 1 X 4 sq mm (for AC) 75 309.00 Meter 23,175.00

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire (for Light DB) 40 660.00 Meter 26,400.00

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire (for Power DB) 20 925.00 Meter 18,500.00

89 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus -bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type (one for light, one for comp.) 2 4,184.00 Each 8,368.00

2.9.2 6 way ( 4 + 18 ), Double door, horizontal type (Power DB) 1 5,132.00 Each 5,132.00

90 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.13.3 40 A to 63 A, double pole (Street Light) 1 1,198.00 Each 1,198.00

2.13.4 40 A to 63 A, four pole (for cubical panel) (Two spare) 5 2,324.00 Each 11,620.00

91 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as reqd. (with 100 % ICU)

92 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6 A to 32 A, Single pole 42 237.00 Each 9,954.00

93 2.7 Providing and fixing following capacity four pole ON-load panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

94 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 12 1,809.00 Sq.ft. 21,708.00

95 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required 1 6,536.00 Each 6,536.00

96 A/R Copper strip/tape of different size 6 871.00 kg 5,226.00

97 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

98 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

99 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

7.1.2 Above 35 sq. mm and upto 95 sq. mm 105 326.00 Meter 34,230.00

100 1.33 Supplying and fixing 2 pin, 6 amps ceiling rose on the existing junction box / wooden block including connection etc as required. 24 64.00 Each 1,536.00

101 1.34 Supplying and fixing batten/angle holder including connection etc as required. 16 80.00 Each 1,280.00

102 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

6.1.6 15 watt LED lamp 16 250.00 Each 4,000.00

103 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 10 521.00 Each 5,210.00

104 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

105 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 10 358.00 Each 3,580.00

106 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 10 2,482.00 Each 24,820.00

107 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

108 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 2 13,721.00 SET 27,442.00

109 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 40 144.00 Meter 5,760.00

110 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

111 8.5 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 6 1,038.00 Each 6,228.00

112 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed PVC conduit as required

112.1 1.15.1 1x1.5 sq.mm (for inverter) 128 38.00 p.mtr 4,864.00

113 DSR 40.1 Supplying Installation Testing and Commissioning of 2 MP IP IR Dome Camera having following specifications, type of lens and features etc :-

1) Signal System: PAL/NTSC, Signal to Noise Ratio: >50 dB, Camera should display Camera title, Date & Time in live & recorded video

2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light ompensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

3) Compression (Minimum):-Video:- H.265 or better, H.264H, H.264, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723

4) Wide Dynamic Range:- WDR (120db or more)

5) Digital Noise Reduction:- DNR (3D) On/Off

6) Video Streaming & Frame Rates :- Triple streaming , configurable (Main stream: 2MP (1920 ×1080)@25/30 fps,Sub streams minimum: 720P@25/30 fps).

7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection

8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, syslog, video encryption, IP/MAC filtering, HTTPS, trusted upgrade, trusted boot.

9) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card.

10) Recording Management: Format SD, overwrite, storage management, video to NAS device

11) Alarm Trigger : Motion/tampering detection; audio detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection

12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast

13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port

15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement.

16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source.

17) Power Requirement: 12VDC/24 VAC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body

19) Operating Condition:- Ambient Temperature:- (-) 05°C to 50°C, humidity 95% (max) (non-condensing)

20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

40.1.1 2MP (@ 25/30fps@1080P (1920×1080)) IP IR Dome Camera with 2.8/ 3.6mm fixed lens (25 for school, 35 for boy's hostel,35 for girl's hostel) 3 Nos 8,048.00 24,144.00

114 DSR 40.2 Supplying Installation Testing and Commissioning of 2MP Fixed Lens IP IR Outdoor Bullet Camera having following specifications and features etc :-1) Signal System: PAL/NTSC, Signal to Noise Ratio: >50 dB,Camera should display Camera title, Date & Time in live & recorded video

2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt Smart IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120dB or more) 5) Digital Noise Reduction:- DNR (3D) On/Off

6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps Sub streams minimum: 720P@25/30 fps

7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection

8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade

9) Onboard Storage: Camera should support built-inm Micro SD/ SDHC/ SDXC Card slot upto 512 GB. Itshould be supplied with minimum 128GB memory Card.

10) Recording Management: Format SD, overwrite, storage management, video to NAS device, 11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection

12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast,

13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port. 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement.

16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source.

17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- (-)05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

40.2.2 2MP @ 25/30fps@1080P (1920×1080) Outdoor Bullet Camera with 2.7 to 4 mm ~12 to 13.5mm or better Varifocal Motorized lens. 2 Nos 19,796.00 39,592.00

115 NS 16- port Gigabit Unmanaged PoE switch (DS-3E0518P-E/M) Description- supply, installation, testing & Commissioning of Port POE Switch. 1 Nos 10,450.00 10,450.00

116 NS 8- port PoE switch with 2 Giga Uplink (CP-DNW GPU8G296) Description- supply, installation, testing & Commissioning of 8 Port POE Switch. 1 Nos 5,451.00 5,451.00

117 DSR 40.12 Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications.

118 NS 6U DVR/Network Rack Description- supply, installation 6U Network Rack for Mounting NVR & POE Switch. 1 Nos 5,563.00 5,563.00

119 NS RJ 45 Connector Description- supply, installation, testing & Commissioning of RJ4 Connector for connection between CCTV Camera and POE Switch 30 Nos 25.00 750.00

120 NS Cat-6 PVC insulated and sheathed LAN cable. Description- supply and drawing UTP 4 Pair Cat-6 PVC Insulated and sheathed LAN cable through existing PVC conduit including connection, testing etc required. 300 Nos 40.00 12,000.00

121 42.4 DSR Supplying, Installation, Testing and Commissioning of following size LED display (LED monitor) industrial grade with 3840x2160 resolution or better, USB playback, bluetooth and miracast connectivity, 4X HDMI 2.0, DP 1.2, HDR 10/10+, brightness: 500-nitsor better, Video wall mode should be available, contrast ratio: 1200:1, OPS slot, viewing angle (H/V): 170°/ 170°, response time less than 12ms, Display control shall be on monitor screen and programmable with remote (remote shall be supplied with system), Key Board, Optical Mouse, etc. as required.

Total Amount (Civil+Furniture+Electrical ) Work. ₹ 6,783,417

Executive Engineer B.C.D,Chapra.