Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.3 LAccepted-AOC | L1 | Accepted-AOC Lowest valid bid | |
| 2 | L2₹4.3 L+₹37.92 (<0.01%)Rejected-Finance NO 10 544 THANEERPANTHAL KANNADI KINASSERY 678701 | KINASSERY | PALAKKAD | KERALA | 678701 | L2 | Rejected-Finance Second lowest | |
| 3 | L3₹5.1 L+₹79,986.25 (18.5%)Rejected-Finance | L3 | Rejected-Finance Third lowest |
Tender Value
₹4.3 L
EMD Value
₹10,900
Closing Date
21 Oct 2022, 5:00 pmClosed
Muneeswaran D
Assistant Executive Engineer, Dredger Sub Division Ernakulam (Irrigation) Civil station, 5th floor, Kakkanad- 682030
Fabrication painting and erection of 1No.regulator shutter for Pathickal check Dam (Mechanical Works) in Ramamangalam Grama Panchayath ,Ernakulam District.
2022_Irrig_512083_1
06/AEE/DSD/EKLM/2022-2023
Open Tender
Repair and Maintenance Works
Item Wise
90 days
Ramamangalam Gramapanchayath
Please refer Tender documents
7 documents required · 7 mandatory
₹960
Yes
₹10,900
Yes
4 Nov 2022
1 Oct 2022
26 Oct 2022
1 Oct 2022
21 Oct 2022
1 Oct 2022
1 Oct 2022 - 21 Oct 2022
Amount
Supply of materials for Regulating shutter and Hoisting platform
85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges
85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges
85.103 : Supply of MS checquered plates including cost of conveyance charges
od25656/2021_2022/MH : Supply of GI pipe 32 mm dia for hand rail of the hoisting platform including cost of conveyance etc. complete
od25922/2021_2022/MH : Supply of GI pipe 25 mm dia for hand rail of the hoisting platform including cost of conveyance etc. complete
od24699/2021_2022/MH : Supply of Bolt and nut for fixing hoisting girders with bridge and also for fixing gear box assembly and stool base
od24700/2021_2022/MH : Suppy of Bolt and Nut up to 300 mm in length
60.1.1 : RING BUND Type-I-Putting up ring bund as per approved shape 2.5m bottom width, 1m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund for an average height 2.00m including labour dismantling the bund after completion of the work etc. complete.
60.2.2 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete
15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
85.108 : Fabrication, erection and commissioning of Structural steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
od24694/2021_2022/MH : Fabrication and supply of structural steel canal shutters( Up to2tonne weight) / Hoisting bridges/Platform and accessories etc.for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery ,all leads and lift ,incidental and handling charges etc complete but excluding cost of material already supplied
85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site
85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing
85.117 : Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings
od24690/2021_2022/MH : Erection of the canal shutters( Up to2tonne weight) / Hoisting bridges/Platform including hand rails,ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery ,incidental and conveyance , leads and lift charges etc complete but excluding cost of material already supplied
Hosting Mechanism
od24694/2021_2022/MH : Fabrication and supply of structural steel canal shutters( Up to2tonne weight) / Hoisting bridges/Platform and accessories etc.for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery ,all leads and lift ,incidental and handling charges etc complete but excluding cost of material already supplied
od24690/2021_2022/MH : Erection of the canal shutters( Up to2tonne weight) / Hoisting bridges/Platform including hand rails,ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery ,incidental and conveyance , leads and lift charges etc complete but excluding cost of material already supplied
85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site
od24695/2021_2022/MH : Providing worm and Pinion having a lifting speed of around 5cm/ min for hand operation including cost of all materials, labour,hire charge and conveyance.
od24696/2021_2022/MH : Providing 67 mm Dia EN-8 screw rod (Screw rod dia 67mm with single start square thread with head pitch of12.7 mm root dia 62.3mm) 7.50 tonne capacity4.00M lift screw hoist having one number ofEN-8 screw shaft having alifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour,hire charges and conveyance.
SAI ENGINEERING
ASHIFUL HAK.C
Bidder Name
ASHIFUL HAK.C
SAI ENGINEERING
vinod k
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.PDF
finance_733605.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .