Repairing of India Mark-II Hand Pump installed at various villages in Ta.Khambhaliya, Bhanvad, Kalyanpur and Okhamandal of Devbhumi Dwarka for One Year.

Name of Work:- Repairing of India Mark-II Hand Pump installed at various villages with providing of manpower, light / medium Four wheeler

commercial vehicle with Diver, POL, Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest

amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta.Khambhaliya,Bhanvad,Kalyanpur and Okhamandal of Devbhumi Dwarka for

Item No. Particulars Qty. Rate Per Amount

Providing light commercial (medium) four wheeler Diesel vehicle on rental basis

for one day (particularly for H.P repairing works) with Driver & POL(Per day) (The

1 vehicle shall be fully insured with fitness certificate & PUC) with 01 Semi skilled 12 78962.00

Labour & 03 Unskilled Labour for month.

(1 Team for 12 Month )

2 Handpump Spares

(A) SPARES FOR PUMP HEAD

Hexa. Bolts M-12x1.75x40mm long with Hexa.Nut M-12x1.75 & Washer

A-2 Hex. Bolt M10x1.50x40 mm long 30 2.58 No

A-3 Nylock Nut M10x1.50 30 1.72 No

A-4 Handle Axle(Stainless Steel) 50 73.92 No

A-5 Washer (4 mm thick) for Handle Axle 0 1.29 No

A-6 Bearing (No.6204-Z) 120 27.63 No

A-7 Spacer(for pump Head) 10 4.26 No

A-8 Chain with Coupling 150 68.32 No

A-9 Bolt for front cover M-12x20 mm long 0 2.27 No

A-10 Pump Head Assly.Consi.of Item No.(1) to (7) as per Fig.3.1 4 1830.08 Set

(B) SPARES FOR CYLINDER

B-1 Pump Bucket 500 4.63 No

B-2 Sealing Ring 150 3.00 No

Upper Valve Assly comp. consi.of item as per fig 3.6 A (Part no 1 to 4 &

Lower Valve Assly comp.consi.of item as per fig 3.6 B (Part no 5 to 7 &

(C) WATER TANK consi.of item as per fig 3.6 B (1 to 6) 6 601.44 Set

(D) Cylinder With Brass Liner consi.of item (a) & (b) 40 280.32 Set

(E) REDUCER CAP 40 69.54 No

(F) Spares for Conne. Rods

F-1 Hexagonal Coupler M-12 x 1.75 x 50mm 150 6.61 No

(G) UPPER VALVE ASSEMBLY SPARES

G-1 Upper Valve Seating 10 1.53 No

G-2 Plunger Yoke Body 0 111.25 No

G-3 Bucket Spacer 0 86.25 No

G-4 Follower 5 104.88 No

G-5 Plunger Rod (S & S) 5 87.58 No

G-6 Upper Valve (Guide) 15 47.50 No

(H) LOWER VALVE ASSEMBLY SPARES

H-1 Check Valve Seat 0 80.66 No

H-2 Check Valve 0 66.25 No

H-3 Check Valve Seating 0 2.29 No

H-4 Rubber Seat Retainer 0 36.63 No

(I) Handle Bar consisting of Item no (1) & (3) as per Fig 4.6 6 613.76 Set

(J) Cylinder Assly Comp.consisting of Item no (1) to (7) as per Fig 3.5 0 1104.00 Set

Conn. Rod Electro Galva.consisting of Item no (1) to (3) as per Fig

Special Tool Kit for I. M.-II Handpump Consi. Item (1) to (11) as per IS

Part-8 with tool box

Standerd Tool Kit for I. M.-II Handpump Consi. Item(1) to (16) as per IS

Part-8 with tool box

(N) Third plate consisting of Item (1) & (2) as per fig 4.5 0 129.03 Set

(O) Spares for deep well Hand pump-Extra Deep

Cylinder Body with Brass Liner consisting of Item no (1) for body fig 5.2 &

for brass linear Fig 6.1 B

O-2 Handle Bar consisting of Item no (1) to (3) as per Fig 4.7 0 1187.20 Set

Upper Valve Assembly complete consisting of Item no (1) to (11) as per

O-4 Follower as per Fig 6.7 0 161.25 No

O-5 Bucket Spacer-Lower as per Fig 6.5 0 75.21 No

Manufacture Supply & Delivery of ISI Marked 32 mm dia medium quality

galvanized mild steel tubes (Continuously welded electric resistance welded

(ERW)/high frequency induction weled (HFIW) /Hot finished welded (HFW) type

screwed at both ends to IS:554/ 1985 for pipe suitable for water and gas

application, socket on one end and other end protected with plastic thread

protector in approximate length of 3 mtrs conforming to IS:1239 (Part-I)

With latest amendment and socket to conforming to IS:1239 (Part-II) 1992 With

latest amendment

Total Cost for one year (Vehicle with manpower+HP Spares Consumed in year+32 mm GI pipe consumed in year)

1.Contractor has to keep Repairing Teams as per the Para no. 9 of the Information of Tender of the Volume I (GCC).

2.Contractor has to keep number of manpower for each repairing team as per the condition no. 1 of the Special Condition of the Volume II

(Technical Bid).

3.Payment will be made as per the deduction conditions mentioned in the Volume I (General Commercial Terms Conditions).

I / We am / are willing to carry out work at ____ % ( in figure ) ___________________ (in words ) above / below the tendered estimated rates as mentioned

Offer for Above Offer for Below

1. Estimate cost Rs: 12,16,596=00 1. Estimate cost Rs: 12,16,596=00

2. Above:____ % Above Rs: _________ 2. Below:____ % below Rs:_________

3.Net amount Rs:_______________ 3.Net amount Rs:_______________

Signature of Contractor Executive Engineer,

P.H. Mech. Division.