Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAccepted-AOC | L1 | Accepted-AOC lowest | |
| 2 | 2₹3.2 L+₹24,488.69 (8.30%)Rejected-Finance | 2 | Rejected-Finance not lowest | |
| 3 | 3₹3.3 L+₹30,403.97 (10.3%)Rejected-Finance | 3 | Rejected-Finance not lowest | |
| 4 | 4₹3.2 L+₹29,682.20 (10.1%)Rejected-Finance | 4 | Rejected-Finance not lowest | |
| 5 | Rejected-Technical | - | Rejected-Technical REJECTED |
| Sl No | Description | Qty | Unit | Animon H L5 | GOPALAKRISHNA PILLAI L4 | HARIPAD LABOUR CONTRACT COPERATIVE SOCIETY LTD NO A 1253 L2 | Bansylal L1 | M SUNDARESAN L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00Compound wall for Anganwadies | ||||||||
| 1.00 | 16.70.1:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I. wire of dia 4 mm | 105.08 | sqm | 1,077.45 ₹1,13,213.06 | 1,075 ₹1,12,955.63 | 1,030 ₹1,08,227.25 | 978 ₹1,02,763.35 Lowest | 1,057.86 ₹1,11,154.64 |
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.92 | cum | 340.99 ₹313.03 | 340 ₹312.12 | 330 ₹302.94 | 309.99 ₹284.57 Lowest | 334.79 ₹307.34 |
| 1.00 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 6.74 | cum | 7,010.63 ₹47,265.67 | 7,010 ₹47,261.42 | 6,700 ₹45,171.4 | 6,373.3 ₹42,968.79 Lowest | 6,883.16 ₹46,406.26 |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 38.74 | sqm | 360.66 ₹13,973.77 | 360 ₹13,948.2 | 350 ₹13,560.75 | 327.87 ₹12,703.32 Lowest | 354.1 ₹13,719.6 |
| 1.00 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 43.84 | sqm | 222.61 ₹9,760.34 | 220 ₹9,645.9 | 215 ₹9,426.68 | 202.37 ₹8,872.91 Lowest | 218.56 ₹9,582.76 |
| 1.01 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 198.01 | kg | 218.03 ₹43,172.99 | 218 ₹43,167.05 | 210 ₹41,582.94 | 198.21 ₹39,248.35 Lowest | 214.07 ₹42,388.86 |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 148.9 | kg | 174.92 ₹26,044.89 | 175 ₹26,056.8 | 170 ₹25,312.32 | 159.02 ₹23,677.44 Lowest | 171.74 ₹25,571.4 |
| 1.01 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 166.02 | kg | 177.02 ₹29,388.68 | 176 ₹29,219.34 | 170 ₹28,223.23 | 160.93 ₹26,717.44 Lowest | 173.8 ₹28,854.1 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 155.75 | sqm | 164.24 ₹25,579.72 | 164 ₹25,542.34 | 160 ₹24,919.36 | 145 ₹22,583.17 Lowest | 161.25 ₹25,114.04 |
Tender Value
₹3.0 L
EMD Value
₹7,394
Closing Date
5 Mar 2025, 6:00 pmClosed
ASSISTANT ENGINEER
ASSISTANT ENGINEER LID EW SECTION KANDALLOOR GP
FENCING WORK FOR ANGANWADYS IN WARDS 2,7,10 AND GRILL WORK FOR ANGANWADY IN WARD 12 OF KANDALLOOR GP-Project No 204/25
2025_LSGD_741814_2
05/2024/AE/LIDEW/KNDLR/TEN5
Open Tender
Civil Works - Buildings
Item Rate
KANDALLOOR
Please refer Tender documents
7 documents required · 7 mandatory
₹655
Yes
₹7,394
Yes
7 Nov 2025
22 Feb 2025
7 Mar 2025
22 Feb 2025
5 Mar 2025
22 Feb 2025
Amount
Compound wall for Anganwadies
16.70.1:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I. wire of dia 4 mm
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
ward 07,c/wall
14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
OD424447/2023-2024:Finishing walls with Acrylic Smooth exterior paint of required shade: (Two or more coat applied @ 1.67 ltr/10 sqm )
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
HARIPAD LABOUR CONTRACT COPERATIVE SOCIETY LTD NO A 1253 (BID ID -2139848)
M SUNDARESAN (BID ID -2135565)
GOPALAKRISHNA PILLAI (BID ID -2139202)
Animon H (BID ID -2135747)
Bidder Name
GOPALAKRISHNA PILLAI
M SUNDARESAN
Bansylal
Animon H
HARIPAD LABOUR CONTRACT COPERATIVE SOCIETY LTD NO A 1253
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .