REPAIRS TO WOODEN, ALUMINIUM AND STEEL JOINERY, HARDWARE FITTINGS AND MISC WORKS INCLUDING CERTAIN TEMPORARY BUILDINGS IN DOMESTIC AREA AT AFA HYDERABAD

Amount

Taking down shutter of any description exc 1 Sqm and n.exc 2 sqm each complete all as specified and as directed

Taking down shutter of any description n exc 1 Sqm each complete all as specified and as directed

Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame exc 1.5 sq. m but n exc 4 sq. m complete all as specified and as directed

Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame n.exc 1.5 sq. m complete all as specified and as directed

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for type of shutters(hung/sliding) of doors, windows, ventilators, including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of aproved make conforming to IS- 733 and IS- 1285, with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e. at top, bottom ad sides with required EPDM rubber / neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, CP brass / stainless steel screws, all complete as per architctural drawigs and the directions of Engineer-in-charge.

S&F Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture n exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick channel fixed with steel screws complete all as specified and directed.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete.

S&F pressed steel frames (size 105x60mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed.

S&F pressed steel frames (size 125x60mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed.

M&L for providing plain cement concrete 1:3:6 Type C-0 (using 12.5mm graded stone aggregate) as in filling hollow of pressed steel frame.

S & F 35 mm thick second class hard wood, Flush shutters, solid core construction, with block board core and plywood face panels, commercial lm type on both sides complete all as specified and directed.

S& F 35mm thick glazed and Skelton shutters, open rebated with sash bars, divided in to squares, prepared to receive glass/ gauze etc. edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass/ gauze. Note: glazing/ gauzing will be measured separately

S&F 12 mm thick prelaminated particleboard exterior grade laminated on both side with decorative choice lamination fixed to aluminium frame work for door panel shutter complete all as specified and directed.

S&F aluminium (extruded section body) door closer hydraulically regulated designation No. 3, universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61to 80 Kg all as specified. MAKE : Godrej or Equivalent.

S&F in repairs aluminium (extruded section body) door closer hydraulically regulated designation No. 3, universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61to 80 Kg all as specified. MAKE : Godrej or Equivalent.

S&F of brass 4 Levers Mortice lock, vertical type, size 100mm

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F of butt hinges, medium weight, cold rolled mild steel of 100 mm long.

Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting exc half brick but n. exc one brick all as specified

M & L for MS flat for hold fast. Conforming to Fe-290 Gde E-165

S&F 300 mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate and complete all as specified.

S&F 150 mm long floordoor stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame, glazed with putty complete all as specified and as directed.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F frosted or ground/obscured type sheet glass, 3mm thick and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.

M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

S & F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works confirming to Fe-290. Gde-E-165 complete all as specified and directed.

Material and labour for preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer on newly treated steel surfaces of any description, etc complete all as specified and as directed.

Dismantling boarding of any description, fixed in any position fixed with nails

M&L block boards 18/19mm thick, grade 2 quality, interior grade, fixed with screws to timber rame work all as specified.

M&L block boards 12 mm thick, grade 2 quality, interior grade, fixed with screws to timber rame work all as specified.

M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive all as specified.

S&F of 100mm brass Hasp and staple, safty type, with hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed.

M&L in repair 2nd class hardwood Plain fillets (50x50) Exc 13 & n.exc 25 Sq.cm, square, rectangular or triangular in section, clean sawn, secured with screws or nails or brads complete all as specified and directed.

S/F of 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel , bright finished

S/F of Stainless steel butt hinges 75 mm long wih screw

S&F standard quality magnetic catcher for cupboard shutters.

S&F in repairs 25mm thick curtain rod stainless steel fancy type complete all as specified and as directed

S&F in repairs fancy type brackets with knobs suitable for 25mm dia stainless steel curtain rod including stay & side clamp as reqd at site complete all as specified and as directed

S&F in repairs Door seal (Snake guard) with Aluminium frame complete all specified

Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar .

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over 20 mm thick screed bed or bedding layer in cement mortar (1:6), including pointingin white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Demolition of cement concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc complete all as specified and as directed.

M & L Cement concrete type B-0 1:2:4 (12.5mm grades aggregate) in haunching concrete etc complete all as specified and as directed

M & L Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered(area of flashings, etc., shall be added to the roof area) etc complete all as specified and directed

Demolition of Brickwork or stone / boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precast concrete articles etc complete all as specified and as directed.

Taking down cement plaster in wall/ceilling surfaces on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed.

M & L for External rendering 15 mm thick cement plaster in CM 1:4 in two layers 5mm thick with liquid WPC as per manufacturers instruction over 10 mm thick on fair faces of brick work or concrete surfaces in roof parapets at any height with necessary scafoldings, finished even smooth without using extra cement (WPC will be measured & paid separately under relevant Item)

M&L for preparation of newly plastered surfaces of external walls and applying two coats cement base paint over a coat of cement primer complete all as specified and directed by the Engineer-in-Charge.

Supply only Liquid water proofing compound.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed by Engr -in- charge.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed by Engr -in- charge.

S&F PVC (SWR) bends any radius suitable for 110mm bore pipe complete all as specified and directed by Engr -in- charge.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia bore of pipe.

Dismantling floor, heath or wall tiling including cement sand mortar bedding and removing rubbish of the premises complete all as specified and directed by Engr -in- charge.

S&F of Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including Screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, complete all as specified and directed by Engr -in- charge.complete all as specified and as directed.

M&L for glazed ceramic tiles coloured of size 350 x 250 x 7 mm / 450 X 350 X 7 mm thick as on walls over jointing in neet slurry and pointing in coloured cement to match the inside of tiles including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engr -in- charge.

Taking up or down GI/CPVC tubing of 15mm bore and connections etc complete all as specified and as directed.

Taking up or down GI tubing of 20mm bore and connections etc complete all as specified and as directed.

Taking up or down GI tubing of 25mm bore and connections etc complete all as specified and as directed.

Refixing old GI tubing of 15 mm bore and connections in new or old position fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed.

Refixing old GI tubing of 20 mm bore and connections in new or old position fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed.

Refixing old GI tubing of 25 mm bore and connections in new or old position fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed.

S & F GI tubes of 15mm dia medium grade with all fittings and fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed.

Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

S & F GI tubes of 20mm dia medium grade with all fittings and fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed.

S & F GI tubes of 25mm dia medium grade with all fittings and fixed complete to walls & ceiling or laid in floors etc complete all as specified and as directed.

S&F in repairs of High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6kg/cm2 fixed complete to walls or laid in floors complete all as specified and directed by Engr -in- charge.

S&F in repairs of Vitreous china squattig pan, Orissa pattern of size 580 x 440mm,white with integral foot rest including trap set and connection to trap and to flushing pipe, anti-syphonage pipe, and with P or S trap, including making good to floor complete all as specified and directed by Engr -in- charge.

S&F in repairs of Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in repairs Plastic water closet seatcover, black, closed pattern with flat bottom. and cover and mild steel chromium plated or aluminium hinged device etc complete.

S&F in repairs of Vitreous china wash basin, white flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets etc complete all as specified and directed by Engr -in- charge.

Supply only of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and directed by Engr -in- charge.

Supply and fixing of Waste coupling of 40 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of CP Bib taps 15mm bore cast copper alloy with capstan head fancy type screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of Angle cock of 15 mm dia cast copper alloy with capstan head fancy type chromium plated etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of concealed stop valves 15 mm dia casr copper alloy fancy type chromium plated with long shank and cup screwed down, high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of Gun metal globe or gate valves/ Non returning Valve of 20mm dia with iron wheel head screwed both ends for iron pipe etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of Ball valve 20mm dia high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum wt. 210gms) etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of ABS chromium plated shower rose LONG ARM with or without swivel joint any size including fixing to steel pipe or union, of size 125mm in repairs complete all as specified and directed by Engr -in- charge.

S&F in repairs of PVC valveless, syphonic action type, flushing cistern, low level, 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets and long flush band etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of PVC connection 15mm size with brass CP nuts of length 450 mm complete all as specified and directed by Engr -in- charge.

S & F in repairs of Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 500 ltrs complete all as specified and directed by Engr -in- charge.

S & F in repairs of Rotational moulded PVC water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) , two layered, hoisted and fixed in position all as specified in SSR part – I including dismantling of OHT of capacity 1000 ltrs complete all as specified and directed by Engr -in- charge.

S&F in repairs of Lids for Rotational moulded PVC water storage tank of 250 to 2000 ltrs capacity fixed in position all as specified in SSR part – I. complete all as specified and directed by Engr -in- charge.

S&F in repairs spindles (full Turn , Half Turn ) for Bib Cock, Pillar Cock, wall mixture and Basin Mixture all as Specified and Directed By Engr-In-Charge.

S&F in repairs of Pillar taps 15 mm dia, cast copper alloy, Long nose , chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe of 15 mm bore etc complete all as specified and as directed.

S&F in repairs of Brass CP wall mixer 'hot' & cold water scrwed down for iron pipe etc complete all as specified and directed by Engr -in- charge. Make: Jaquar/cera equivalent make as approved by GE.

S&F in repair of centre hole basin mixture 15 mm bore dia with fancy type heads chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and capston head, screwed for iron pipe and fixed complete all as specified and directed by Engr -in- charge. Make of Jaquar/cera or equivalent make as approved by GE.

S&F in repairs of towel ring 150 mm dia type ABS body chromium plated fixed with and including Chromium plated brass screws complete all as specified and directed by Make of Jaquar/cera or equivalent make as approved by GE.

S&F in repairs of PVC waste pipe 32 mm bore, 900 mm long etc complete all as specified and directed by Engr -in- charge.

S&F in repairs Soap dish, stainless steel and fixed to wall complete all as specified and directed by Engr -in- charge.

S&F in repairs toilet paper holder coloured vitreous china box type complete all as specified and directed by Engr -in- charge.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long fixed fixed with necessary screws, bolts , and supporting L type angles with drilling in walls complete all as specified and directed by Engr -in- charge.

S&F in repairs of stainless steel grating 100 mm dia without hole complete all as specified and directed by Engr -in- charge.

S&F in repairs of stainless steel grating 100 mm dia with hole complete all as specified and directed by Engr -in- charge.

S&F in repairs of sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed by Engr -in- charge.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of Vitreous China Pedestal type EWC with attached flushing cistern, white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and directed by Engr -in- charge.

S&Fin repairs of CP Bib taps two way in one 15 mm cast copper alloy fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by Engr -in- charge.

S&F in repairs of ABS body CP health faucet complete set including holder stand and one metre PVC pipe, 15 mm cast copper alloy screwed down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by Engr -in- charge.

S&F in repairs glass corner/ mirror shelves size 300/450 mm of each fixed with necessary screws, bolts , and supporting L type angles with drilling in walls complete all as specified and directed by Engr -in- charge.

S&F in repairs PVC Cabinet of size 600mm x450mm with necessary fittings and hinges complete all as specified and directed by Engr -in- charge.

M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 and n exc 500 capacity in litresand write date of cleaning and due date of cleaning on OHT complete all as specified and directed by Engr -in- charge.

M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 500 and n exc 1000 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and directed by Engr -in- charge.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed by Engr -in- charge.

S&F PVC (SWR) bends any radius suitable for 75mm bore pipe complete all as specified and directed by Engr -in- charge.

S&F in repairs PVC (SWR) branch piece with excess door single (Single Y) equal or unequal 110 mm dia all as specified and directed

S&F in repairs PVC (SWR) bends any radius with access door suitable for 75mm bore pipe complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece single (Single Y) equal or unequal 75 mm dia all as specified and directed

S&F in repairs of cast iron Nahani trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) etc complete all as specified and directed by Engr -in- charge.

S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, all as Specified and Directed By Engr-In-Charge.

M & L for preparing old plastered or unplastered surfaces on ceilings including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge.

M & L for preparing old plastered or unplastered surfaces of walls including cornices and applying one coat of distemper oil emulsion all as specified and directed by Engineer-in-Charge.

Dwarka Pershad Radhey Ramanlal (BID ID -3466574)

Sadrush Enterprises (BID ID -3471886)

S J REDDY (BID ID -3471783)