GENERAL-Electronics Division -Urgent Repairs to PWD Electronics Division Office at chembukavu Thrissur-General Civil Work

Amount

civil works

15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

15.14.2:Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area below 40 square centimeters

15.14.1:Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above

50.9.13.2:Supplying and fixing Pingoda wood wrought and put up for roof members including cost and conveyance of materials etc. complete.

50.9.13.4:Supplying and fixing Dept. wood wrought and put up for roof members including cost and conveyance of materials etc. complete.

50.9.14.2:Supplying and fixing Pingoda wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc. complete.

50.9.14.4:Supplying and fixing Dept. wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc . complete.

OD130099/2025-2026:oiling with waste oil two coat to the roof members including all cost and materials,conveyance, labour charges etc complete

OD130101/2025-2026:Supplying and stacking MP Hip and Ridge Tiles including all cost and conveyance charges etc. complete.

OD130102/2025-2026:Supplying and stacking MP Tiles including all cost and conveyance charges etc. complete.

OD130100/2025-2026:Roofing with MP tiles including labour charges etc. complete.

50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

OD166395/2025-2026:Engaging Coolie

OD166396/2025-2026:Engaging Plumber/Fitter (Gr-1) for sanitary repairing works

13.91:Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.82.2:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats

13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

OD166397/2025-2026:Engaging Carpenter

OD166406/2025-2026:supplying and fixing 15mm CP long body tap

OD166407/2025-2026:Providing and fixing 15 mm C.P. brass pillar tap for Wash basin

OD166408/2025-2026:Supplying and fixing PTMT Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

OD166754/2025-2026:Supplying and fixing name board with letters, (frame with square tube ,base ACP, Acrylic panel sheet, letters made with multi wood letters ) including all cost of materials.

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

T.J.George (BID ID -2413919)

MAJO JOSE KONIKKARA (BID ID -2414447)

Bidder Name

T.J.George

MAJO JOSE KONIKKARA

RAJAN P I