Porbandar- Provision to construct new CMS Lobby with complete facility for Loco Pilot/Asst. Loco pilot'/Train Manager.

B-Electrical items

Item Breakup - A-DSR 2021

of 88 mm, weighing not less than 170 gms 17.74 Providing and fixing PTMT shelf 440 mm Each 2 607.05 1214.1 long, 124 mm width and 36 mm height of 64 approved quality and colour, weighing not less than 300 gms. 17.81 Providing and fixing floor mounted, white Each 2 16100.4 32200.8 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual 65 flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 18.0 WATER SUPPLY 18.4S PP-R PIPES BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, 18.4 including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. -Internal Exposed on walls 66 18.4.4 PN - 16 Pipe, 40mm OD (SDR-7.4) Metre 10 523.6 5236 67 18.4.5 PN - 10 Pipe, 50mm OD (SDR-11) Metre 40 666.65 26666 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the 18.5 pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of E n g i n e e r - i n - C h a r g e . -Concealed work,including cutting chases and making good the wall etc. 68 18.5.1 PN - 16 Pipe, 20mm OD (SDR-7.4) Metre 10 439.9 4399 69 18.5.2 PN - 16 Pipe, 25mm OD (SDR-7.4) Metre 40 501.6 20064 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, 18.6 including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in- Charge. -External work 70 18.6.5 PN - 10 Pipe, 50 mm OD (SDR-11) Metre 30 568.6 17058 71 18.6.9 PN - 10 Pipe, 110 mm OD (SDR-11) Metre 40 1689.5 67580 18.7S C.P.V.C. PIPES Making connection of G.I. distribution branch with G.I. main of following sizes by 18.13 providing and fixing tee, including cutting and threading the pipe etc. complete : 72 18.13.1 25 to 40 mm nominal bore Each 8 757.1 6056.8 73 18.13.2 50 to 80 mm nominal bore Each 8 1513.7 12109.6 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 74 18.17.1 25 mm nominal bore Each 8 532.35 4258.8 75 18.17.3 40 mm nominal bore Each 8 707.3 5658.4 76 18.17.4 50 mm nominal bore Each 8 878.25 7026 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 77 18.18.1 15 mm nominal bore Each 8 348.85 2790.8 78 18.18.2 20 mm nominal bore Each 8 397.45 3179.6 79 18.18.3 25 mm nominal bore Each 8 399.15 3193.2 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES BHAVNAGAR DIVISION-ENGG/WESTERN RLY 18.48 Providing and placing on terrace (at all floor Litre 8000 9.7 77600 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 80 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 81 18.49.1 15 mm nominal bore Each 8 434.2 3473.6 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to 18.50 IS standards and weighing not less than 810 gms. 82 18.50.1 15 mm nominal bore Each 4 715.05 2860.2 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 83 18.52.1 15 mm nominal bore Each 10 594.75 5947.5 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing PTMT Ball cock of approved quality, colour and make 18.62 complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.62.5 50 mm nominal bore, 242mm long, Each 10 1188.55 11885.5 84 weighing not less than 1240 gms 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff 19.1 mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 85 19.1.2 150 mm diameter Metre 20 591.4 11828 86 19.1.5 300 mm diameter Metre 15 1774.5 26617.5 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 19.2 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 87 19.2.2 150 mm diameter S.W. pipe Metre 20 1095.15 21903 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water 19.4 tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar 19.6 in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 88 19.6.4 300 mm dia. R.C.C. pipe Metre 10 902.05 9020.5 21.0 ALUMINIUM WORK BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required 21.1 EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent Kg 216 433.95 93733.2 or dyed to required shade according to IS: 89 1868, Minimum anodic coating of grade AC 15) 21.1.1.2 Powder coated aluminium (minimum Kg 330 466.3 153879 90 thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of 21.1.2 fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent Kg 24 531.8 12763.2 or dyed to required shade according to IS: 91 1868, Minimum anodic coating of grade AC 15) 21.1.2.2 Powder coated aluminium (minimum Kg 20 564.8 11296 92 thickness of powder coating 50 micron) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in 21.2 panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.2 Pre-laminated particle board with Sqm 24.6 951.05 23395.83 93 decorative lamination on both sides Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 36.86 1019.8 37589.83 94 (weight not less than 10kg/sqm) 22.0 WATER PROOFING BHAVNAGAR DIVISION-ENGG/WESTERN RLY 22.6 Providing and laying water proofing Sqm 205.7 585.55 120447.64 treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of 95 slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. 26.0 NEW TECHNOLOGIES AND MATERIALS 26.41S NEW TECHNOLOGY ITEMS Providing and laying factory made Precast concrete solid blocks of 200 mm thickness 26.68 of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: 26.68.1 Cement mortar 1:6 (1 cement : 6 coarse cum 66 6057.95 399824.7 96 sand) Providing and laying factory made Precast concrete solid blocks of 200 mm thickness 26.69 of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level 26.69.1 Cement mortar 1:6 (1 cement : 6 coarse cum 221.26 8086.6 1789241.12 97 sand) Total 11706138.93