Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAccepted-AOC | ₹2.9 L | L1 | Accepted-AOC AOC |
| 2 | L2₹3.0 L+₹6,551.47 (2.23%)Rejected-Finance 41 KANNAN KAL AVSAR | ₹3.0 L+₹6,551.47 (2.23%) | L2 | Rejected-Finance Lowest bid accepted as per decision of Committee |
| Sl No | Description | Qty | Unit | BALAJI CONSTRUCTION L1 | K AND J BUILDERS L2 |
|---|---|---|---|---|---|
| 1.00Building Maintenance (ANGANWADI No.58 ward 11) | |||||
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 473.9 | kg | 200 ₹94,780.8 | 185 ₹87,672.24 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 629.41 | kg | 163 ₹1,02,594.48 Lowest | 190 ₹1,19,588.66 |
| 1.00 | OD184488/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 92.8 | sqm | 540 ₹50,112 Lowest | 580 ₹53,824 |
| 1.00 | OD173695/2025-2026:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.35 mm thick with zinc coating not less than 275 gm/m2 | 27 | metre | 323 ₹8,721 | 170 ₹4,590 Lowest |
| 1.00 | OD199500/2025-2026:Supplying and fixing 150 mm dia PVC rain water gutter square section including fitting with 32mx5mMS
Flat supporters at 1 m interval etc. complete | 36 | metre | 478 ₹17,208 | 280 ₹10,080 Lowest |
| 1.01 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.14 | cum | 312 ₹42.12 Lowest | 500 ₹67.5 |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.32 | cum | 8,025 ₹2,600.1 Lowest | 9,200 ₹2,980.8 |
| 1.01 | 50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall | 5 | metre | 368 ₹1,840 Lowest | 534 ₹2,670 |
| 1.01 | OD262879/2025-2026:M.S. heavy weight butt hinges | 2 | no | 131 ₹262 Lowest | 250 ₹500 |
Tender Value
₹3.4 L
EMD Value
₹8,468
Closing Date
16 Feb 2026, 10:00 amClosed
Assistant Engineer
LID EW SECTION NEDUVATHOOR GP
78/26 MAINTENANCE OF ANGANVADIS -Neduvathoor GP
2026_LSGD_834112_4
6/AE/LIDEW/NDVR/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
Neduvathoor GP
Please refer Tender documents.
8 documents required · 8 mandatory
₹750
Yes
₹8,468
Yes
10 Sept 2026
7 Feb 2026
17 Feb 2026
7 Feb 2026
16 Feb 2026
7 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Building Maintenance (ANGANWADI No.58 ward 11) | |||||
| 1.001 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 473.9 | kg | - | - |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 629.41 | kg | - | - |
| 1.003 | OD184488/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 92.8 | sqm | - | - |
| 1.004 | OD173695/2025-2026:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.35 mm thick with zinc coating not less than 275 gm/m2 | 27 | metre | - | - |
| 1.005 | OD199500/2025-2026:Supplying and fixing 150 mm dia PVC rain water gutter square section including fitting with 32mx5mMS
Flat supporters at 1 m interval etc. complete | 36 | metre | - | - |
| 1.006 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.14 | cum | - | - |
| 1.007 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.32 | cum | - | - |
| 1.008 | 50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall | 5 | metre | - | - |
| 1.009 | OD262879/2025-2026:M.S. heavy weight butt hinges | 2 | no | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1403086.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
Tendernotice_2.pdf
PDF • 0.25 MB
Tendernotice_3.pdf
PDF • 0.25 MB
Afdt.pdf
Tender Documents • 0.24 MB
viewsbd.pdf
Tender Documents • 2.26 MB
Fot.pdf
Tender Documents • 0.25 MB
BOQ_1403086.xls
BOQ • 0.31 MB
Prelim.pdf
Tender Documents • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .