Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹135.4 Cr
EMD Value
₹1.4 Cr
Closing Date
21 Jan 2026, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Neeravari Nigam Limited
Manohar Bisnal
Flood Control and Flood Management for Tupparihalla phase-II upto Confluence of Bennihalla from Km 00.0 to 90
KNNL/2024-25/FP/WORK_INDENT2891
KNNL/2024-25/FP/WORK_INDENT2891
Open
Flood Protection Works
Two Tender Document System(Two Cover)
KNNL Division MRBC Div No 3 Byahatti
27 documents required · 27 mandatory
To qualify for award of this contract, each Tenderer in their name should have the following in the last five years i.e. 2020-21, 2021-22,2022-23, 2023-24,2024-25 QA)The intending bidder should have in last 5 years i.e. from 2020-21 to 2024-25, satisfactorily completed (not less than 90percent of contract value) as a prime contractor, one similar work costing not less than 50percent of the amount put to tender (159.72 x 50percentequal Rs.79.86 Crores) in last five years. The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned Division and counter signed by the Superintending Engineer of the same circle or equivalent in case of other Government undertaking within India. The cost will be updated to the present value by giving a weight age of 10percent for each year. Note-QA1) Similar nature of work means, Earthwork Excavation, Earthen Embankment, concrete structures such as RCC Retaining wall/Bridge/Barrage/Aqueduct etc., QA2) Work done certificate to be uploaded should have following information.a) Date of Agreement and date b) Agreement Period and month c) Contract / Agreement Value and Amount Rs in lakhs d) Amount of work executed and Amount Rs in lakhs e) percent of Fin. Progress w.r.t. Contract value and percent f) Date of completion of work and date g) Copies of Last RA Bill / Final RA Bill shall be uploaded in Karnataka Public Procurement in support of work done certificate.
The intending bidder should have executed minimum quantity of 1) Earthwork in excavation / silt removal is 7,01,500Cumc in any one financial year, during the last five financial years (2020-21 to 2024-25). 2)Earthwork in Embankment) is 4,23,150Cum in any one financial year, during the last five financial years (2020-21 to 2024-25). 3)RCC Structure concrete quantity Grade M-15 and above) is 30,500Cum in any one financial year, during the last five financial years (2020-21 to 2024-25). 4) Reinforced steel is 1820.00tonne in any one financial year, during the last five financial years (2020-21 to 2024-25). The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned division and counter signed by the Superintending Engineer of the same Circle or Equivalent in case of other Government undertaking
Tenderers who meet the above specified minimum qualification criteria, will only be qualified, if their available tender capacity is more than the total tender value(Rs.159.73crore). The available tender Capacity will be calculated as under-Assessed available tender Capacity equal to (AxNx1.5-B), Where,Aequall to Maximum value of civil engineering works Executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress.N equal to Number of years prescribed for completion of the works for which tenders are invited.B equal to Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 18months (Period of completion of the works for which tenders are invited) Note. 1.The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be certified by Statutory Auditors of the Company or by the proprietor of the company through an affidavit. Note-2 Even though the Tenderers meet the above criteria they are subject to be disqualified if they have (a)made misleading or false representation in the forms, statements and attachments submitted in proof of the qualification requirements and / or (b) record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history or financial failure etc, and / or (c) Participated in the previous tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification. If the bidder / bidders have participated in more than one work, the available tender capacity will be assessed and number of works will be awarded as per his available bid capacity.
The intending bidder in his / its name should have in the last 5 years i.e., 2020-21 to 2024-25 achieved in at least 2 financial years, a minimum financial turnover of Rs.212.98 Crore (usually not less than two times the estimated annual payments under this contract) (Rs.159.72 Crore x 2 x 12 months / 18 months). The turnover prior to FY 2024-25 will be updated to the Present Price Level by giving weight age of 10percent each year. Audited Profit and Loss account certified by a practicing Chartered Accountant bearing UDIN along with copy of Income Tax returns filed for the years indicated above should be furnished. FY 2025-26
A copy of the KPWD/CPWD Class-I Registration Certificate
Copy of Valid Employees Provident Fund Registration Certificate with recently paid challan copy
Copy of Valid GST Registration Certificate& PAN card
The intending bidder/firm/company should furnish list of Manpower, machinery available with them for taking up the work as per section3
The details in support of qualification criteria as mentioned in para 4.0 below
Technical details containing document with preliminary designs, working methodology in support of their bid as per the bidding document
The requisite Earnest Money Deposit (e-Cash)
Latest copy of the Income tax returns ITR-V filed for the year for the financial year 2024-25 mentioning PAN number
Bidder should furnish liquid assets and/or availability of credit facilities of not less than Rs.48.20 Crore from any Nationalized / scheduled bank (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc. The format for Bankers Certificate/ Line of Credit (BC/LOC) letter to be issued by the Banks as per circular No- FD- CAM/16/2022 (P-2) dated- 22.08.2022
The intending bidder should have Own/Lease equipments and machineries, shall befurnished as per the Finance Department Govt Circular No.FD263EXP12-2022 dated 11-05-2022 (a)Availability by owning at least 50percent of the required / specified key and critical equipment for this work. (b)Each tenderer should demonstrate availability of few key equipments/machinery for execution of the work.(c) However, it is obligatory for the contractor to use the following machineries for various activities of roadwork /Irrigation works involved in construction as per MORTH specification and Irrigation manual. 1)Self-loader 4 cum capacity-Total 04 Nos, Own 02 Nos, HIRE / LEASE 02 Nos. 2) Transit Mixer- Total 08 Nos, Own 04 Nos, HIRE / LEASE 04 Nos 3)Tippers-Total 20 Nos, Own 10 Nos, HIRE / LEASE 10 Nos 4) Excavator like JCB and Hitachi- Total 15 Nos, Own 10 Nos, HIRE / LEASE 05 Nos 5)Water Tanker-Total 06 Nos, Own 03 Nos, HIRE / LEASE 03 Nos 6)Plate Vibrator- Total 04 Nos, Own 02 Nos, HIRE / LEASE 02 Nos 7)Pump set (10 HP)-Total 06 Nos, Own 03 Nos, HIRE / LEASE 03 Nos 8) Vibratory Roller-Total 03 Nos, Own 02 Nos, HIRE / LEASE 01 Nos
To qualify for a package of contracts made up of this and other contracts for which tenders are invited in this IFT, the tenderer must demonstrate having experience and resources to meet the aggregate of the qualifying criteria for the individual contracts
₹7,500
₹1.4 Cr
19 Dec 2025
19 Dec 2025
28 Jan 2026
13 Jan 2026
17 Jan 2026
Flood Control and Flood Management for Management for Tuparihalla phase-II upto Confluence of Bennihalla from Km 00.0 to 90.00
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other an...
Excavation and removal of silt and silt mixed with sand in dry condition from River/ Nala by Mechanical means including disposing off the same in spoil bank in layers as directed with all other ancill...
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification.Complete with all lead and lift as directed by Engineer incharge.
Providing hearting embankment using impervious soil collected in embankment area in heaps as part of disposal of excavated soil from canal in layers of 250 to 300 mm thickness (before compaction), inc...
Providing hearting embankment using selected impervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials,machinery, labour,all other opera...
Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction ) including cost of all materials, machinery, labour,all other ...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to m...
Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and filling murrum / gravely soil ( CNS soil ) for foundation or around pipes including cost of all materials, labour, spreading soil in layers of 100 to 150 mm, breaking clods, watering, co...
Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3....
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height....
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3....
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m heigh...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m heigh...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...
Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3 (75:25 proportion) as per approved mix design procedure and thickness as per d...
Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. - Pile diamete...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing rubble / boulder and sand filling behind abutment and return walls in layers including cost of all materials, labour, watering, ramming etc., complete with all lead and lifts. Complete with ...
Providing and constructing dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing / w...
Providing and constructing dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing / w...
Providing and constructing dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging ston...
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...
Supplying P-3 Class R.C.C spun pipes (safe for 6 kg / cm² test pressure) to work spot including cost of all materials, machinery, labour, taxes, duties, levies, royalty and all necessary works as app...
Laying and jointing P-2/P-3 class R.C.C spun pipes true to line and level with perfect linking at joint including loading, unloading, rolling/ lifting and lowering into trench, applying soft soap to s...
Providing and constructing contraction joints by fixing 230 mm wide central bulb type PVC water stop in single line supported by 10 mm dia. steel dowel rods on either side at 1 metre interval includin...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...
Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification.Complete with all lead and lift as directed by Engineer incharge.
Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessori...
Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than...
Providing and constructing 450 mm thick size stone pitching with using 200 to 250mm size stones with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all mat...
Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, cover...
Providing and foming expansion joint for spillway bridge consisting of 75 x 75 x 6 mm angles 2 numbers provided with 250 mm long 12 mm dia. anchors fixed to both flanges at 150 mm c / c and 140 x 6 mm...
Providing and fixing 200 x 200 x 750 mm roughly dressed boundary demarcation / chainage/ arrow stones including cost of all materials, labour, engraving marks, excavating pit, fixing in position, ...
Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting.Complete with all lead and lift as di...
Providing rubble and murum filling in layers of 250 to 300 mm including cost of all materials,machinery, labour, watering, ramming and all other ancillary operations .Complete with all lead and lift a...
Supply and fixing of FRP “C” section frame of size 100mm and wall thickness of 8mm (1mm) and Rib thickness of 12mm smooth finish with marine grade gel coat, with side projections at every 1 Mtr. i...
Supplying and fixing FRP Needle gate made out of concealed GI tubes of suitable size and thickness. Zinc coating of not less than 360GSM, I.S make hot rolled from any reputed pipe manufacturing compan...
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including TandP and scaffolding wherever n...
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including TandP and scaffolding wherever n...
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...
Applying epoxy mortar over leached, honey combed and spalled concrete surface and exposed steel reinforcement complete as per Technical Specification.Complete with all lead and lift as directed by Eng...
Removal of defective concrete, cleaning the surface thoroughly, applying the shotcrete mixture mechanically with compressed air under pressure, comprising of cement, sand, coarse aggregates, water and...
Applying pre-packed cement based polymer mortar of strength 45 Mpa at 28 days for replacement of spalled concrete. Complete with all lead and lift as directed by Engineer incharge.
Epoxy bonding of new concrete to old concrete..Complete with all lead and lift as directed by Engineer incharge. Ch: 0+00 Km to Ch: 50+00 Km
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall includ...
Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2...
Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including plugging the joints with selected earth, and all other an...
Filling clayey soil between two rows of sand bags placed for forming ring bund including cost of all materials, labour,tamping, plugging leakage points and all other ancillary operations .Complete wit...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70kg/m² using mechanica...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m² on Granular Surface. Tack coat on Bituminous surface Complete with all lead...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m² on Granular Surface.Tack coat on Granular surface treated with primer Compl...
Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified rading, premixed with bituminous binder VG-40 @ 5.2 per cent of mix and fi...
Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-40, @ 4.0 per cent...
Providing hearting embankment using selected impervious soil from dump areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour,all other operations su...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
MDP-Royalty circular for attachment all dtp and e-proc.pdf
Others - MDP-Royalty circular • 2.36 MB
Bank Guarantee Insurance bond.pdf
Others - Bank Guarantee Insurance • 0.35 MB
FINAL Tender Notifacation.doc
Others - Tender Notification • 0.13 MB
Govt MDP ltr dtd 05-06-2024.pdf
Others - Govt MDP ltr • 0.08 MB
Debarment cerculer.pdf
Others - Debarment circuler • 0.60 MB
fINAL Tuprihalla P2-DTP.doc
Tender Document • 22.25 MB
Revised Royalty Rate.pdf
Others - Revised Royalty Rate • 0.44 MB
E- Bank Guarantee.pdf
Others - E- Bank Guarantee • 0.71 MB
Verification of CA documents.pdf
Others - Verification of CA document • 0.13 MB
THFP-Pase-2 DRWG.pdf
Others - All Drawings • 39.94 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .