Renovation of Heat Transfer Lab at CSIR-CBRI Roorkee

Dismantling wooden boardings in lining of walls and partitions, including supporting members but including stacking within 50 metres lead at GF : Thickness above 10 mm up to 25 mm.

Demolishing R.C.C. work manually/ by mechanical means at lllrd floor including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means at IIIrd Floor including stacking of serviceable material and disposal of unserviceable material within 50 metres lead at ground floor as per diréction of Engineer-in-charge : In cement mortar

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily : Double charge vitrified tile polished finish of size 600 x 600 mm

㠂㄀㨂㜀㠂䀀㴂䠀㐂倀㸂圀㐂嬀㜂攀㬂焀䈂稀㴂舀㤂蜀㬂輀㐂需㜂鰀㬂ꔀ㐂꤀㨂뀀㐂밀㔂쌀㘂씀㜂찀㠂팀㬂�㘂㐂㘂䄂㰂切㴂㐃焀ࠀ敃瑮牥湩⁧愠摮†桳瑵整楲杮†湩汣摵湩⁧猠牴瑵楴杮‬瀠潲灰湩⁧攠捴‮湡⁤敲潭慶景映牯㩭映牯匠敨癬獥⠠慃瑳椠楳畴)㴀଀㠀က㴀ᰀ㨀✀㴀㴀㨀䈀䈀䘀㔀一㜀圀㤀嬀㴀挀㨀椀㤀氀䄀꜀ࠀ瑓敥敲湩潦捲浥湥⁴映牯†⹒⹃⹃†潷歲†湩汣摵湩⁧猠牴楡桧整楮杮‬畣瑴湩Ⱨ戠湥楤杮‬汰捡湩⁧湩瀠獯瑩潩湡⁤楢摮湩⁧污潣灭敬整愠潢敶瀠楬瑮⁨敬敶›潃摬琠楷瑳摥戠牡s㴀؀㔀ᔀ㐀ᨀ㬀∀㐀㌀㜀䈀㴀䬀㔀吀㠀尀㘀开㐀栀䀀氀㠀琀㤀砀㬀脀㴀踀㠀鐀㰀阀㤀鬀㨀ꌀ䀀㬀ࠁ-牐癯摩湩⁧湡⁤楦楸杮匠慴湩敬獳†瑓敥䄠䤠䥓†〳‴ㄨ⼸⤸†楫捴敨楳歮愠⁳数⁲卉ㄺ㤳㌸眠瑩⁨⹃⹉戠慲正瑥⁳湡⁤瑳楡汮獥⁳瑳敥汰杵㐠‰浭‬湩汣摵湩⁧慰湩楴杮漠⁦楦瑴湩獧愠摮戠慲正瑥ⱳ挠瑵楴杮愠摮洠歡湩⁧朠潯⁤琠敨†慷汬⁳眠敨敲敶⁲爠煥極敲⁤㨠†楋捴敨猠湩楷桴畯⁴牤楡潢牡⁤‭ㄶ砰㘴‰浭戠睯敤瑰⁨〲‰浭攠捡⁨.㔀਀㐀฀㬀ᔀ㨀 㤀⤀㐀⸀㠀㈀㤀㨀㐀䈀㴀䜀㘀䨀㜀一㬀圀㤀尀㠀愀㨀樀㘀渀㐀砀㘀縀㤀茀㐀蘀㨀言㜀鐀㔀鴀㐀ꀀ㤀꤀㐀관㨀뼀㠀쌀䈀턀㨀�㤀㴀㸀㨀ﴀ㜀Ȁ㴁਀㜁က㴁ᘀ䔁᠀㬁 㘁⌀㬁⠀㴁⸀㤁鸀牐癯摩湩⁧愠摮†楦楸杮†污浵湩畩

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.S in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)

15 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing factory made PVC door frame made of PVC extruded sections having an overall dimension as below (tolerance +1mm), with wall thickness 2.0 mm (+ 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (+ 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer in-charge . Extruded section profile size 48x40 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 100mm size

Providing and fixing bright finished brass handles with screws etc. complete: 100 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.SO kg/sqm)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marbleArea of slab over 0.50 sqm

Please Enable Macros to View BoQ information