Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹3.5 LAdmitted-Finance NO 6 BHEEMNAGAR MADARMADDI ROAD DHARWAD 580001 | DHARWAD | KARNATAKA | 580001 | -4.65% | ₹3.5 L | L1 | Admitted-Finance |
| 2 | L2₹3.5 L+₹7,117.03 (2.06%)Admitted-Finance | -2.69% | ₹3.5 L+₹7,117.03 (2.06%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | - | Rejected-Technical Technically not Qualified |
Tender Value
₹3.6 L
EMD Value
₹8,600
Closing Date
11 Jun 2026, 3:00 pmClosed
Executive Enginner (Mtc-II), NMPA Panambur
Office of the EE(Mtc-II), NMPA, Panambur, Mangalore - 575 010
Restoration of galvanized sheet for roof at toilet block near Over flow shed No.01 and Restoration of galvanized sheet for roof at West side of Platform area of Over flow shed No.02, NMPA
2026_NMPT_909643_1
CIVIL/CE(C)/EE(C)/19/2026-27
Open Tender
Civil Works - Buildings
Item Rate
45 days
NMPA Panambur
As per tender conditions
6 documents required · 6 mandatory
₹560
Yes
As per tender Conditions
₹8,600
Yes
5 Aug 2026
21 May 2026
12 Jun 2026
21 May 2026
11 Jun 2026
4 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Description | |||||
| 1.01 | providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05%) approved by Engineer-in-chare) 05 fotal coated thicknees 50.05 %) total coated thickness with zinc coating 120 g/m2 as per IS 277 in 240 per s: 277, In 240 mpa steel grade, 5-7 microns IS: in epoxy pimer on both side of the sheet and polyester top coat ct 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | 92.5 | Sqm | 568 | ₹52,540 |
| 1.02 | providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 1,360 | Cum | 113 | ₹1,53,680 |
| 1.03 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite / trap /basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in la machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates - including Form work/ scaffolding etc., | 1.75 | Cum | 6,243 | ₹10,925.25 |
| 1.04 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an under coat of of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete | 45 | Sqm | 167 | ₹7,515 |
| 2B : Restoration of sheet Shed No.2 | |||||
| 2.01 | Removing existing Aluminum sheets of over hanging and damaged sheets | 40 | Sqm | 55 | ₹2,200 |
| 2.02 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 121 | Sqm | 568 | ₹68,728 |
| 2.03 | Replacing the GI hooks of roofs galvalume / cement sheets. | 150 | No | 45.38 | ₹6,807 |
| 2.04 | Re-setting existing RCC purlins including cost of labour all incidental charges with all lead and lift charges, hire charges of Machinery equipment etc. complete as directed by Engineer in-charge | 60 | Rmt | 81.2 | ₹4,872 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.15 MB
BOQ_956123.xls
BOQ • 0.29 MB
RestorationofsheetTD.pdf
Tender Documents • 3.52 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .