Construction of Examination Hall on 1st floor of AELP building at Agricultural College Mahanandi

Construction of Examination Hall on 1st floor of AELP Building at Agricultural College, Mahanandi.

PCC Dummy Columns (Unreinforced cement concrete): Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges, etc., complete for finished item of work.

Brick Masonry: Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges, etc., complete for finished item of work.

Reinforced cement concrete: Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges, etc., complete for finished item of work.

Dismantling doors, windows and clear storey windows, Ventilators etc., ( wood or steel) shutters including Chowkhats, architraves, hold fasts and other attachments etc., and stacking them within 100m lead including labour charge etc., and complete for finished item of work.

Columns first floor: Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using Concrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering. shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Columns Second floor: Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using Concrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering. shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Lintels First floor: Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using Concrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering. shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Sunshades FF 75 mm at fixed end, 50 mm at free end (62.5 mm avg thickness): Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using Concrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc..complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering. shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Roof Beams FF: Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using Concrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc..complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering. shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

150 mm thick Slab FF: Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using Concrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc..complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering. shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Waist Slab 200 mm thick FF: Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using Concrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Plain Cement Concrete corresponding to M20 Grade as per IS 456 equivalent to 1:1.5:3 (cement: fine aggregate: Coarse aggregate) proportion nominal mix for foundations and under flooring bed using 20mm graded Hard, machine crushed granite from approved quarry using concrete mixer 10/7 cft (0.2/0.8cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete curing concrete etc., and complete for finished item of work. (APSS No. 402) STEPS

Supply and Application of Integral cement waterproofing admixture for Concrete slabs and mortar plastering works (Dosage: @ 100 ml per 50 kgs of cement) Complies with IS 2645-2003 including cost and conveyance of all materials etc., complete as directed by the dept.

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 200ml per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and complete for finished item of work. (APSS No. 901 & 903)

Providing Thermo Mechanically Treated (TMT) Bars Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., and complete for finished item of work.(APSS No.126)

First Floor: Masonry work in Cement Mortar (1:6) prop (Cement: Sand) in superstructure with Flyash cement / lime solid blocks of size 290mmx225mmx140mm from approved source having minimum crushing strength of 50 Kgs/sq.cm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

Second Floor: Masonry work in Cement Mortar (1:6) prop (Cement: Sand) in superstructure with Flyash cement / lime solid blocks of size 290mmx225mmx140mm from approved source having minimum crushing strength of 50 Kgs/sq.cm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-1) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt hinges (IS:205) 150mm long, I No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1500 mm x 2100 mm)

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.1 fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single/double glass panes, wire mesh and silicon sealent. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two made. nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension.

Ornamental plastering to ceiling 12 mm thick in single coat in CM (1:3) including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for RCC exposed faces for finished item of work. (SS 901,903 & 904) for:- Ceiling Plastering 1/c in CM (1:5): 12 mm

First Floor: Plastering 12mm thick single coat in CM 1:5 using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and complete for finished item of work.(SS 901,903 & 904)

Second Floor: Plastering 12mm thick single coat in CM 1:5 using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and complete for finished item of work.(SS 901,903 & 904)

First Floor: Plastering 20mm thick single coat in CM 1:5 using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and complete for finished item of work. (SS 901,903 & 904)

Second Floor: Plastering 20mm thick single coat in CM 1:5 using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and complete for finished item of work. (SS 901,903 & 904)

Providing Mild Steel Tubes & pipes of all diameters as per IS - 1161, of different diameters, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawing to be supplied at the time of execution of work, including cost and conveyance of all Mild Steel Tubes & pipes sections and all wastages such as overlaps, couplings, weld joints, etc., all operational, incidental, labour charges for fabricating steel works like window Grills, compound wall grills, Iron doors, windows including cost of welding rods, power charges, including cost of labour charges for fabricating all heavy steel works like Trusses, stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc excluding cost of fixing in position etc., complete for finished item of work.

Providing & fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours fixed with G.I 'J' bolts & nuts 8mm dia with bitumen & G.l. limpet washers filled with white lead & including a coat of approved paint etc., including cost and conveyance of all materials and all labour charges etc. complete or as per approved drawings and directions of Engineer in Charge

Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all Sent and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife/muslin pad, air dry for 2-3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work in all floors for internal walls

Painting to new walls with 2 coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade 1 making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - acrylic emulsion paint 2 Coats+1 coat primer

Painting to new walls with one coat water based cement primer of Interior grade 1 and two coats of Acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content lessthan 50grams/liter for internal walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and complete for finished item of work in all floors.

Flooring with double charged vitrified tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In-Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., and complete for finished item of work. (APSS No.701 & 707)

Providing skirting to internal walls with double charged porcelain vitrified tiles of 8 to 10mm thick of any colour and finish in all shades and designs, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and complete for finished item of work. (APSS No.701 &707)

Treads: Supply and Fixing with Anti - skid Granite (Black) 18-20 mm thick upto 2.43M (For Stair case) and set over a base coat of CM (1:8) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of slabs including cost and conveyance of all materials like cement sand, water flooring stones etc., cost of base coat and all operational and labour charges such as mixing mortar, dressing, cutting, fixing in position, lift charges etc. complete for finished item of work for Treads (APSS No.701 & 707)

Risers 0.15 m: Supply and Fixing with Anti - skid Granite (Black) 18-20 mm thick upto 2.43M (For Stair case) and set over a base coat of CM (1:8) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of slabs including cost and conveyance of all materials like cement sand, water flooring stones etc., cost of base coat and all operational and labour charges such as mixing mortar, dressing, cutting, fixing in position, lift charges etc. complete for finished item of work for Treads (APSS No.701 & 707)

Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same., labour charges, material charges, complete finished item of work or as directed by Engineer-in-Charge.

Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 1 No for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 25mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, etc., complete for finished item of work.

Supply and placing of the Plain Mix Concrete (1:4:8) proportion nominal mix (cement: fine aggregates: coarse aggregate) corresponding to IS 456 with minimum cement content of 162 kgs per 1 cum of concrete using concrete mixer machine with 40mm size machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including mixing, centering, shuttering, laying concrete, curing etc. complete for finished item of work. for Dummy Columns

Provoiding 20mm thick Ornamental Plain Cement Mortor bands in cement mortor (1:3) (1 cement 3 sand) 50mm width including cost and conveyance of all materials like cement, sand, water etc., to site, including cost of all labour charges for mixing mortar, finishing, curing, directed by Engineer - in -charge etc., and complete for finished item of work

Providing 110 mm Dia ISI marked PVC (Sudhakar / Nandhini) down water take pipes with Single socket. 4.0kg/sq.cm pressure of ISI marked including cost of necessary PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and complete for finished item of work. (APSS No. 1328)

Providing mild steel flats and bars for fabricating steel works like window grills, including cost of welding rods, power charges, including cost of fixing in position as per approved designs and drawings including cost and coveyance of bars from approved sources to site work, all operational. incidental, and labour charges such as cutting, bending, placing in position etc., complete for finished item of work For Window Grills

Painting two coats with synthetic enamel paint Grade II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide of Grade I to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Supply and Fixing of ISI 25mm dia 2.20mm thick heavy grade with IS:9537 part 3 FRLS regid PVC pipe concealed in Roof slabs with all required accessories including masonary work and labour charges etc., complete. of Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/Polyline/ Orbit/AKG/ Beljin/Vasavi/DEC

Supply and Fixing of ISI 25mm dia 1.80 mm thick Concealed medium grade with IS:9537 part 3 FRLS regid P.V.C. pipe with required all accessories including Masnory work all labour charges etc., complete .of Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/Orbit/ AKG/ Beljin/ Vasavi/DEC

Wiring with run of 2 of 14/0.3mm (1.0 Sqmm) FRLS-H / HFFR / ZHFR PVC insulated 1100V grade as per IS:694/1990 specification copper cable in existing pipe including supply and fixing of Ceiling rose and 6A ISI mark Modular type switch on suitable size PVC Surface box with cover frame including cost and conveyance of all material and all labour charges etc., complete for light points in Non Residential Buildings. Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/Goldmedal/GM/ Fortune Arrt/Anchor /Million/ APAR (Anushakthi) Accessories Makes: Legrand(Myrius/Lyncus)/ Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/Athena) / Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal (GIFA) Million (M-VEE)/ Anchor (RomaPLUS)/ Precision (Series7)/ Honeywell (Blenzepro)

Wiring with run of 3 of 14/0.3mm (1.0 Sqmm) FRLS-H / HFFR / ZHFR PVC insulated 1100V grade as per IS:694/1990 specification copper cable in existing pipe including supply and fixing of Ceiling rose and 6A ISI mark Modular type switch on suitable size PVC Surface box with cover frame including cost and conveyance of all material and all labour charges etc., complete for fan points in Non Residential Buildings. Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/Goldmedal/GM/ Fortune Arrt/Anchor /Million/ APAR (Anushakthi) Accessories Makes: Legrand(Myrius/Lyncus)/ Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/Athena) / Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal (GIFA) Million (M-VEE)/ Anchor (RomaPLUS)/ Precision (Series7)/ Honeywell (Blenzepro)/ Indoasian (shynora)

Supply of 2 Module Modular type, electronic step type Fan Regulator ISI marked. Makes: Legrand( Myrius/Lyncus)/ Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena) / Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal (GIFA) Million (M-VEE)/ Anchor (RomaPLUS)/ Precision (Series7)/ Honeywell (Blenzepro)/Makes: Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena) / Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal (GIFA) Million (M-VEE)/ Anchor (RomaPLUS)/ Precision (Series7)/ Honeywell (Blenzepro)/ Indoasian (shynora)

Supply and fixing of 6A 3pin wall plug socket with 6A MODULAR switch control on a common switch board with earth continuity including wire leads, connections along with all labour charges etc., complete of Makes: Legrand (Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena) / Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal (GIFA) Million (M-VEE)/ Anchor (RomaPLUS)/ Precision (Series7)/ Honeywell (Blenzepro) / Indoasian (shynora)

Supply and fixing of 16A 3pin wall plug socket with 16A MODULAR switch control with suitable size pvc surface box with earth continuity including wire leads, connections along with all labour charges etc., complete of Makes: Legrand (Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena) / Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/ Goldmedal (GIFA) Million (M-VEE)/ Anchor (RomaPLUS)/ Precision (Series7)/ Honeywell (Blenzepro) / Indoasian (shynora)

Supply and fixing of distribution board with 20A single phase plug and socket in sheet steel enclosure with 20A SP MCB of including giving connections and labour charges etc., complete surface Makes: Legrand(Ekinox 3) / Schneider-A9/Hager Novello+/ Seimens/Crabtree Xpro classique-II/ Lauritz Knudsen (formerly L&T) -Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus)/ABB-ITUS MCB make: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx / Lauritz Knudsen (formerly L&T)-AU/Indo Asian-Opti pro/ HPL (Techno)/Anchor (Uno Plus)/ABB-SB200

supply and run of 3 of 36/0.3mm (2.5 sq mm) PVC FRLSH/HFFR/ZHFR/ P.V.C. 1100V Grade as per IS 694/1990 insulated unsheathed) flexible copper cable in the existing pipe for run of mains including for earth continuty all labour charges connections etc., complete as directed by the department of Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/ Polycab/ Gloster/ Goldmedal/GM/ Fortune Arrt/Anchor/ Million/ APAR(Anushakthi) / Sudhakar / Orbit / Batra Henlay

supply and run of 3 of 54/0.3mm (4.0 sq mm) PVC FRLSH/HFFR/ZHFR/ P.V.C. 1100V Grade as per IS 694/1990 insulated unsheathed) flexible copper cable in the existing pipe for run of mains including for earth continuty all labour charges connections etc., complete as directed by the department of Makes: Finolex / RR kabel / Havells/ Finecab/ KEI/Polycab/ Gloster/Goldmedal/GM/ Fortune Arrt/Anchor/ Million/APAR (Anushakthi)

Supply, transportation and fixing of 36W Recessed / Surface mounting 2' x 2' (600x600 mm) LED luminaire made of CRCA sheet housing with powder coated with acrylic diffuser, constant current driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , with operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of > 120 lumens / watt, CCT: 3000K - 5700K, minimum CRI>70, .etc., complete with earth connection and not less than two years warranty a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj/ Havells / Halonix /Jaquar /HPL/GM / GreenLites / Gold Medal/Eveready / FortuneArrt// Rhino/ Panasonic/ Ecolink/Bee-lite/Capart. b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Supply and fixing 48" (1200mm) Sweep decorative Ceiling Fan, with double ball bearings with all accessories without Regulator. including wire connection and labour charges etc. Makes: Crompton (HS Decora/Aura) / Bajaj Regal Star / Havells Festiva / Orient Ornamental Shine /Halonix(Halo) /Polycab (Aerobliss)/G.M. (Air Wave Premium) /Goldmedal (Flora)/RJP(Aroma Super)/ Million ( Max400Deco).

Supply and Fixing of 8 way Horizantal TPN DB's with IP-43 protection of suitable for accomodating 63 A FP 100 mA RCBO as incomer with 24nos 6 to 32 A SPMCB's as outgoings as per IS 8623; IS 13032; IEC 61439-3. including internal connections etc.,complete for surface Makes: Legrand (Ekinox 3) / Schneider-A9/Hager Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (formerly L&T) -Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus)/ABB-ITUS MCB make: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx / Lauritz Knudsen (formerly L&T)-AU/Indo Asian-Opti pro/ HPL (Techno)/Anchor (Uno Plus)/ABB-SB200

Supply and Fixing of 4 way vertical TPN DB's with IP-43 protection of suitable for accomodating 4 pole100 Amps MCCB's as incommer with 4 No 32A TP MCB's as out going per IS 8623; IS 13032; IEC 61439-3. including internal connections cable connections and all labour charges for surface etc., complete.of Makes: Legrand(Ekinox 3) / Schneider-A9/Hager Novello+/ Seimens/Havells STADx/ Lauritz Knudsen (formerly L&T) -Newrange/Indo Asian-Opti Pro/ HPL (Techno)/ Anchor (Uno Plus)/ABB-ITUS MCB Makes: Legrand-DX3 / Schneider-A9/Hager-h3/ Siemens-5SX4/ Havells STADx / Lauritz Knudsen (formerly L&T)-AU/Indo Asian-Opti pro/ HPL (Techno)/Anchor (Uno Plus)/ABB-SB200

Supply and Transportation of 70 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) Makes : Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel/Finecab

Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) all connections for the cables.

Supply and laying of 8 SWG Copper wire(0.1155Kgs/1Mtr) Earth wire/Strip in horizontal /Vertical run in Ground/surface/Recess including, revitting, soldering, saddles, making connection etc as required complete for finished item of work.

Providing independent earthing by excavating a trench to a deapth of 2.1m in all soils, as per size specified in the data using 40mm dia b-Class GI pipe of 2.5mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of slat and charcoal in layers and all labour charegs etc., complete. for small quarters complete for finished item of work.