e-tender for the Furnishing Works at Ernakulam

Amount

etender for the Furnishing Works at Ernakulam For more details refer tender documents

Providing and fixing Dias Table of size 2000mm x 600 mm x 750 mm made of hydrualic press laminated 16mm BWR 303 grade marine plywood of box work and shutter approved quality and make; All exposed EXTERIOR portions of the plywood will be finished with 1mm thick Laminate of approved make and shade. The inside portion of the reception table will be finished with 0.8mm laminate. The rate will include all other necessary,materials and labour charges etc.

Providing and fixing in Members table of size 1400mm x500 mm x 750 mm made of hydrualic press laminated 16mm BWR grade marine plywood of box work and shutter approved quality and make; All exposed EXTERIOR portions of the plywood will be finished with 1mm thick Laminate of approved make and shade. The inside portion of the reception table will be finished with 0.8mm laminate. The rate will include all other necessary ,materials and labour charges etc. (Double seater)

Ahuja/equivalent table top mike ow 250

Supply and installation of 1.5 ton three star invertor Ac (Godrej /BPL or equivalent Brand)

Light point wiring using 1MM V guard wire including Materials and labour charge

Supply and normal installation ofCeiling fan(V-Guard or Crompton brand)

Profile Strip 240W ( Luker/equivalent Brand)

profile channel

12W panel LED ( Luker/equivalent Brand)

Strip light including drives ( Luker /equivalent Brand)

Staiinless steel name letters with government emplum

Dias platform made with 18mm BWR marine plywood frame with 12 mm covering and carpet finish

Hard Wood Medium Back Chair

Hardwood medium back dias chair with cushioned seat and back

Ceramic tile work (120x120cm)

Gypsum board ceiling : Providing and fixing gypsum board ceiling made up of 12mm thick moisture resistant gypsum with GI sections & Channels . All the joints and corners finished with fiber tape and joint filler

Supplying and fixing wooden partition with glass by covering with 6mm 9mm BWR plywood on either side of 16mm BWR Plywood frame work and all exposed portions of the plywood will be finished with 1mm thick Laminate of approved make and shade. Including doors two numbers all materials and labour charges etc.

Providing and fixing all window in position Roller Blinds, including all standard fitments and fabric. Rate quoted shall include all material, labour charges, cost of conveyance etc.

Panelling with good quality 6mm,9mm plywood with frame work and mica lamination wall area

Painting ceiling with plastic emulsion paint of approved quality & colour two coats by roller / sprayer after finishing with wall putty 2 coats and cement primer. Rate quoted shall include all material, labour charges, cost of conveyance, all taxes etc(Ceiling )

Ostrya