SPECIAL REPAIR TO FOUR TOILET AND FOUR BATHROOMS NEAR OR LIVING IN BLDG NO BT1 AT NAINITAL UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Demolition of Brickwork or stone bolder masonary built in CM incl all quoins, arches, pillars etc, but excl ashlar facing, dressed stone work and PCC complete all as specified and as directed.

Material & Labour for Brickwork with sub class 'B' brick straight or curved on plan to any radius in half brick walls built in CM 1:4 complete all as specified

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m Complete all as specified and directed.

Material & Labour for 15mm thick plastering in cement mortar 1:6, surface finished even & smooth without using extra cement with a dubbing out average 10mm thick on irregular face of walls, complete all as specified and directed.

Material & Labour for 15mm thick plastering in cement mortar 1:6, surface finished even & fair with a dubbing out average 10mm thick on irregular face of walls, complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.complete all as directed.

Material & Labour for coloured non skid ceramic coloured /printed tiles 7 to 8 mm thick (square / Rectangular)area of each tiles exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles with and including 15mm thick screed bed in CM 1:6 complete all as specified.

Material & Labour for Glazed ceramic coloured tiles (200x200mm) x 7mm thick, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and incl 10mm thick screed bed in CM 1:6 complete all as specified.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling of boarding , any description fixed in any position like wall ,wooden flooring and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified and directed.

Supply & Fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw as specified and directed

Supply & Fixing Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw as specified and directed

Supply & Fixing 2nd class softwood, boarding, planed one side with butt joints fixed with nails in ay situaton complete all as specified ad directed.

Material & Labour for second class soft wood, clean sawn in scantling complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Material & Labour for cement concrete type B-2 1:2:4 (using 40mm graded stone aggregate) as in surface channels and drains including necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moukds, mitred/stopped ends etc, complete all as specified.

Dismantling water tanks of capacity exc 500 and n.exc 1000 ltrs and removing to store complete all as specified.

Rotational moulded polye- thylene water storage tanks triple layred (cylindrical vertical with closed top) of capacity 1000ltrs, of any colour, hoisted and fixed in position all as specified in SSR Part I.

Material & Labour for 50 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement laid in bays including necessay form work complete all as specified and directed.

Taking up or down 15 and 20 mm bore size steel tubing and connections and removing to store complete all as specified and directed.

Supply & Fixing Tubes, 'medium grade' 20mm bore size galvanised iron, with all GI fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply & Fixing Tubes, 'medium grade' 15MM bore size galvanised iron, with all GI fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply & Fixing Fancy Bib taps 15 mm bore dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply & Fixing in repairs fancy type Pillar taps 15 mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply & Fxing in repairs Stop valves, cast copper alloy, 15 mm bore dia screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply & Fxing in rep[airs 20 mm bore, Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply & Fixing Ball valves 20mm bore dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

Supply & Fixing in repairs Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.

Supply & Fixing in repairs Towel Rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

Supply & Fixing in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply & Fixing in repairs 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply & Fixing in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply & Fixing PVC (SWR) bends of 75mm bore complete all as specified and directed.

Supply & Fixing in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply & Fixing PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

Supply & Fixing PVC (SWR) 'S' trap of 110 mm dia complete all as specified and directed.

Supply & Fixing Wash down water closet (Pedestal pattern), vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests fixed in repair with and incl 10 ltr PVC valveless, cyphonicaction type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply & Fixing in repairs, 550x400mm vitreous China, wash hand basin , flat back with pedestal excluding trap and waste chain and plug and porcelain stopper including sutaible size brackets waste pipe and waste coupling complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each.& removing from site all as specifed & directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sqm but n. exc.4sqm each and removing from site complete all as specified and directed.

Supply & Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in SSR Part-II, complete all as specified

Supply & Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed.

Supply & Fixing second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply & Fixing 30 mm second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

Supply & Fixing 150 mm Aluminium anodised, barrel tower bolts of ex-truded section and fixed complete all as specified and directed.

Supply & Fixing 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply & Fixing Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and directed

Supply & Fixing Butt hinges,medium grade100 mm cold rolled mild steel, and fixed complete all as specified and directed.

Supply & Fixing 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Material & Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of new surfaces complete all as specified and directed.

Material & Labour for painting to new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new surfaces complete all as specified and directed.

Material & Labour for preparing newly plaster surfaces and applying two coat of white wash complete all as specified and directed.

Material & Labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

All as per item No 56 except stone. Note: Stone obtained from demolition shall be used

E/M Portion Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc and making good disturbed surfaces of walls etc, as per existing finishes by plastering, repairs and white / colour/ distempering etc complete all as specified and directed

Supply & Fixing point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed ISI marked (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size copper conductor cable multi stranded as in earth wire and connected to common earth dolly complete all as specified and directed.

All as per item No.59 herein before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board

All as per item No 59 above herein before but wiring with 2.5 sqmm coper wire (FRLS) PVC and 2.5 sqmm earth wire for socket outlet 6 pin 16 Amps on independent board complete all specified and directed .

Supply & Fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply & Fixing socket outet 2 in 1, 3 pin 5 Amps, flush type complete all as specified and directed.

Supply & Fixing socket outet 2 in 1, 3 pin 15 Amps, flush type complete all as specified and directed.

Supply & Fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Material & Labour for Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.

Supply & Fixing sheet metal enclusure for DBs(double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing isolator SPN 240 Volts, 40 Amps, 10KA complete all as specified and directed.

Supply & Fixing service connection with flat twin core 10 sqmm PVC sheathed cable with aluminnium multi-stranded conductor drawn into with and including PVC connduit (ISI Marked) not less than 20 mm dia from service bracket to main switcj incl connection etc complete all as specified and directed.

Taking down carefully old us service connections (cables) of any size on hander or on battens or in conduit, any type, any pattern complete all as specified and directed.

Supply and fixing LED lights fitting 1x 22W, T5, Energy saving channel suitable for LED lamps with standard fitting etc complete with all accessories internally pre-wired and incl connection up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply & Fixing MCB SPN 6-30 Amps, 240 V complete all as specified and directed.

S S CONSTRUCTION CO

PRIYANKA EXECUTIVE SERVICES